참고문헌
- Pak, S. W., 1991, 'Study on the Deformation Behaviour of Electrogalvanized Coatings,' PhD Thesis, Northwestern University, USA, Evanston
- Kim, Y. S., Park, K. C. and Cho, J. O., 1991, 'Frictional Characteristics of Electro Zn-Ni Alloy Coated Steel Sheets,' J. of KSME A, Vol. 15, No. 6, pp. 1807-1818
- Kim, B. M., et al., 2006, 'Identification of the Bulk Behavior of Coatings by Nanoindentation Test and FESimulation and Its Application to Forming Analysis of the Coated Steel Sheet,' J. of KSME A, Vol. 30, No. 11, pp. 1425-1432 https://doi.org/10.3795/KSME-A.2006.30.11.1425
- Marder, A. R., 2000, 'The Metallurgy of Zinc-Coated Steel,' Progress in materials science, Vol. 45, pp. 191-271 https://doi.org/10.1016/S0079-6425(98)00006-1
- HiRa, T., et al., 1993, 'Friction Behavior of Coated Steels in Sheet Forming,' J. of JSTP, Vol. 34, No. 393, pp. 1141-1146
- Hayashi, H., 1993, 'Tribology in Sheet Metal Forming,' J. of JSTP, Vol. 34, No. 393, pp. 1114-1121
- Hayashi, H., 1985, 'Behavior of Coating Layer in Forming of Galvanized Steel Sheet,' J. of JSTP, Vol. 26, No. 291, pp. 355-360
- Urai, M., et al., 1997, 'Effect of Press-Forming Conditions and Coating Structure on Flaking Phenomenon in Galvannealed Steel Sheets,' Materials Technology for Automobiles, Vol. 47, No. 2, pp. 29-32
- Rangarajan, V., et al., 1996, 'Influence of Strain State on Powdering of Galvannealed Sheet Steel,' Proceeding of SAE, pp. 63-70
- Adams, R. D., Wake W.C., 1997, 'Structural Adhesive Joint in Engineering,' Chapman & Hall, London
- Petrie E. M., 2007, 'Handbook of Adhesives and Sealants,' Mcgraw-Hill, New York
- Yen, H. Y. and Tandjung D., 2005, 'Mixed Mode Fracture Analysis of the Lap Shear Specimen Test per ASTM D1002,' J. Reinforced Plastics and Composites, Vol. 24, pp. 839-853 https://doi.org/10.1177/0731684405047771
- Hu, G., 1995, 'Mixed Mode Fracture Analysis of Adhesive Lap Joints,' Composite engineering, Vol. 5, pp. 1043-1050 https://doi.org/10.1016/0961-9526(95)00026-J
- Lee, C. J. et al., 2008, 'The Evaluation of Surface and Adhesive Bonding Properties for Cold Rolled Steel Sheet for Automotive Treated by Ar/O2 Atmospheric Pressure Plasma,' J. of the KSME A, Vol. 32, No. 4, pp. 354-361 https://doi.org/10.3795/KSME-A.2008.32.4.354
- ASTM D1876-01
피인용 문헌
- Vibro-acoustic characteristics of an annular disk with narrow radial slots vol.11, pp.5, 2010, https://doi.org/10.1007/s12541-010-0081-5
- Sound radiation from in-plane vibration of thick annular discs with a narrow radial slot vol.227, pp.5, 2013, https://doi.org/10.1177/0954406212451066
- Strength Evaluation of Pb-free Solder Joints with Artificial Aging Time and Test Temperature vol.22, pp.3, 2014, https://doi.org/10.7467/KSAE.2014.22.3.090