Abstract
The ability of natural abrasives which were recovered from CRT glass polishing process was evaluated. Comparing the center line average roughness values of a glass polished with new pumice (Ra = $0.039{\mu}m$) and with new garnet (Ra = $0.031{\mu}m$), the glass surface polished with the recycled pumice and the garnet had less pits on the surface with smaller Ra values (Ra = $0.025{\mu}m$ for recycled pumice and Ra = 0.029 for recycled garnet). Recycled rouge contains amorphous glass fragments so that it should be used as a cement replacement rather than recycle into an abrasive. Nnatural abrasives, pumice and garnet powder, which are used in CRT glass polishing process can be recycled into abrasives so that it can help to minimize costs and environmental impact from the production of abrasives and the disposal of waste sludge.
CRT 브라운관 패널의 연마과정에서 배출되는 폐연마슬러지로부터 석류석 등의 연마재를 회수하고, 연마성능을 평가하였다. 재활용 부석과 석류석으로 연마한 유리의 평균표면거칠기값(Ra = $0.025{\mu}m$, = $0.029{\mu}m$)은 새 연마재로 연마한 유리에서의 값(Ra = $0.039{\mu}m$, $0.031{\mu}m$)보다 작았으며 표면의 선이나 홈도 적었다. 루즈의 경우 유리 파편이 혼입되어 연마재로 재활용하기에는 적합하지 않다. 본 기술을 이용하여 폐연마슬러지에 함유된 천연연마재 광물자원인 부석과 석류석을 회수한다면 CRT 유리 연마공정에서 재활용할 수 있고, 슬러지 매립으로 발생되는 처리비용과 환경오염문제를 줄일 수 있을 것이다.