Smart Structures and Systems

  • 제5권4호
  • /
  • Pages.469-482
  • /
  • 2009
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Application of structural health monitoring in civil infrastructure

  • Feng, M.Q. (Center for Advanced Monitoring and Damage Inspection, Department of Civil and Environmental Engineering, University of California)
  • 투고 : 2008.09.15
  • 심사 : 2008.11.05
  • 발행 : 2009.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

The emerging sensor-based structural health monitoring (SHM) technology has a potential for cost-effective maintenance of aging civil infrastructure systems. The author proposes to integrate continuous and global monitoring using on-structure sensors with targeted local non-destructive evaluation (NDE). Significant technical challenges arise, however, from the lack of cost-effective sensors for monitoring spatially large structures, as well as reliable methods for interpreting sensor data into structural health conditions. This paper reviews recent efforts and advances made in addressing these challenges, with example sensor hardware and health monitoring software developed in the author's research center. The hardware includes a novel fiber optic accelerometer, a vision-based displacement sensor, a distributed strain sensor, and a microwave imaging NDE device. The health monitoring software includes a number of system identification methods such as the neural networks, extended Kalman filter, and nonlinear damping identificaiton based on structural dynamic response measurement. These methods have been experimentally validated through seismic shaking table tests of a realistic bridge model and tested in a number of instrumented bridges and buildings.

키워드

참고문헌

  1. Chen, Y., Feng, M.Q. and Soyoz, S. (2008), "Large-scale shake table test verification of bridge condition assessment methods", J. Struct. Eng. ASCE, 134(7), 1235-1245. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:7(1235)
  2. Chen, Y. and Feng, M.Q. (2008), "Structural health monitoring by recursive bayesian filtering", J. Eng. Mech. ASCE, Accepted for publication.
  3. Doebling, S.W., Farrar, C.R., Prime, M.B. and Shevitz, D.W. (1996), "Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: a literature review", Los Alamos National Laboratory Report, LA-13070-MS.
  4. Feng, M.Q. and Kim, J.M. (1998) "Identification of a dynamic system using ambient vibration measurements", J. Appl. Mech., 65(2), 1010-1023. https://doi.org/10.1115/1.2791895
  5. Feng, M.Q. and Bahng, E.Y. (1999), "Damage assessment of jacketed RC columns using vibration tests", J. Struct. Eng. ASCE, 125(3), 265-271. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:3(265)
  6. Feng, M.Q., De Flaviis, F. and Kim, Y.J. (2001), "Use of microwaves for damage detection of FRP-wrapped concrete structures", J. Eng. Mech. ASCE, 128(2), 172-183.
  7. Feng, M.Q., Kim, D.K., Yi, J.H. and Chen, Y. (2003), "Baseline models for bridge performance monitoring", J. Eng. Mech. ASCE, 131(5), 562-569.
  8. Feng, M.Q. and Kim, D.H. (2006), "Novel fiber optic accelerometer using geometric moiré fringes", Sensors Actuat. A., 128(1), 37-42. https://doi.org/10.1016/j.sna.2005.12.050
  9. Feng, M.Q., Kim, Y.J. and Park, K. (2006), "Real-time and hand-held microwave NDE technology for inspection of FRP-wrapped concrete structures", FRP International - The Official Newsletter of the International Institute for FRP in Construction, 3(2), pp. 2-5.
  10. Feng, M.Q., Franchetti, P., Frizzarin, M., Soyoz, S. and Modena, C. (2008), "Damage assessment of concrete bridges based on damping analysis of ambient vibration data", J. Struct. Control Health Monit., Accepted for publication.
  11. Franchetti, P. (2004), "Vibration-based damage assessment of precast elements", PhD Dissertation, DIMS, Universita degli Studi, Trento, Italy.
  12. Hoshiya, S. and Saito, E. (1984), "Structural identification by extended kalman filter", J. Eng. Mech., 110(12), 1757-1770.
  13. Kalman, R.E. (1960), "A new approach to linear filtering and prediction problems", J. Basic Eng., 82(1), 35-45. https://doi.org/10.1115/1.3662552
  14. Kim, Y.J., Jofre, L., Feng, M.Q. and De Flaviis, F. (2004), "Microwave sub-surface imaging technology for damage detection", J. Eng. Mech. ASCE, 130(7), 858-866. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:7(858)
  15. Kurashima, T., Horiguchi, T. and Tateda, M. (1990), "Thermal effects on Brillouin frequency shift in jacketed optical silica fibers", Appl. Optics, 29, 2219-2222. https://doi.org/10.1364/AO.29.002219
  16. Levin, R.I. and Lieven, N.A.J. (1992), "Dynamic finite element model updating using neural networks", J. Sound. Vib., 210(5), 593-607.
  17. Loh, C.H. and Tou, I.C. (1995), "A system identification approach to the detection of changes in linear and nonlinear structural parameters", Earthq. Eng. Struct. D., 24, 85-97. https://doi.org/10.1002/eqe.4290240107
  18. Masri, S.F., Smyth, A.W., Chassiakos, A.G., Caughey, T.K. and Hunter, N.F. (2000), ''Application of neural networks for detection of changes in nonlinear systems", J. Eng. Mech., 126(7), 666-676. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:7(666)
  19. Montalvao, D., Mala, M.N.N. and Ribeiro, A.M.R. (2006), "A review of structural health monitoring with special emphasis in composite materials", Shock Vib., 38(4), 295-324. https://doi.org/10.1177/0583102406065898
  20. Sohn, H., Farrar, C.R., Hemez, F.M., Shunk, D.D., Stinemates, D.W. and Nadler, B.R. (2004), "A review of structural health monitoring literature: 1996-2001", Los Alamos National Laboratory Report, LA-13976-MS.
  21. Soyoz, S. and Feng, M.Q. (2008a), "Long-term monitoring and identification of bridge structural parameters", Accepted for publication in Computer-Aided Civil and Infrastructure Engineering.
  22. Soyoz, S. and Feng, M.Q. (2008b), "Seismic damage detection based on structural stiffness and experimental verification", J. Struct. Control Health Monit., 15(7), 958-973. https://doi.org/10.1002/stc.229
  23. Yang, J.N., Lin, S., Huang, H. and Zhou, L. (2005), "An adaptive extended kalman filter for structural damage identification", J. Struct. Control Health Monit., 13(4), 849-867.
  24. Yun, C.B. and Shinozuka, M. (1980), "Identification of nonlinear structural dynamic systems", J. Struct. Mech., 8, 187-203. https://doi.org/10.1080/03601218008907359
  25. Zou, L., Bao, X., Afshar, V. and Chen, L. (2004), "Dependence of the Brillouin frequency shift on strain and temperature in a photonic crystal fiber", Optics Letter, 29(13), 1485-1487. https://doi.org/10.1364/OL.29.001485
  26. Zou, L., Bao, X., Wan, Y. and Chen, L. (2005), "Coherent probe-pump based Brillouin sensor for centimetercrack detection", Optics Letter, 30, 370-372. https://doi.org/10.1364/OL.30.000370

피인용 문헌

  1. An algorithm based on two-step Kalman filter for intelligent structural damage detection vol.22, pp.4, 2015, https://doi.org/10.1002/stc.1712
  2. A two-stage and two-step algorithm for the identification of structural damage and unknown excitations: numerical and experimental studies vol.15, pp.1, 2015, https://doi.org/10.12989/sss.2015.15.1.057
  3. Modeling and assessment of bridge structure for seismic hazard prevention vol.61, pp.3, 2012, https://doi.org/10.1007/s11069-011-9969-3
  4. A State-of-the-Art Review on Fatigue Life Assessment of Steel Bridges vol.2014, 2014, https://doi.org/10.1155/2014/956473
  5. Locating and identifying model-free structural nonlinearities and systems using incomplete measured structural responses vol.15, pp.2, 2015, https://doi.org/10.12989/sss.2015.15.2.409
  6. Consistency of PPP GPS and strong-motion records: case study of Mw9.0 Tohoku-Oki 2011 earthquake vol.16, pp.2, 2015, https://doi.org/10.12989/sss.2015.16.2.347
  7. Structural health monitoring of the Jiangyin Bridge: system upgrade and data analysis vol.11, pp.6, 2013, https://doi.org/10.12989/sss.2013.11.6.637
  8. Structural monitoring of wind turbines using wireless sensor networks vol.6, pp.3, 2009, https://doi.org/10.12989/sss.2010.6.3.183
  9. Locating the damaged storey of a building using distance measures of low-order AR models vol.6, pp.9, 2009, https://doi.org/10.12989/sss.2010.6.9.991
  10. A sensor fault detection strategy for structural health monitoring systems vol.20, pp.1, 2009, https://doi.org/10.12989/sss.2017.20.1.043
  11. Prediction of the remaining service life of existing concrete bridges in infrastructural networks based on carbonation and chloride ingress vol.21, pp.3, 2009, https://doi.org/10.12989/sss.2018.21.3.305