Structural Engineering and Mechanics

  • 제33권2호
  • /
  • Pages.159-177
  • /
  • 2009
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

An application of large displacement limit analysis to frame structures

  • Challamel, Noel (Laboratoire de Genie Civil et Genie Mecanique (LGCGM), INSA de Rennes, Universite Europeenne de Bretagne)
  • 투고 : 2007.07.18
  • 심사 : 2009.07.20
  • 발행 : 2009.09.30
⟨ 이전 논문 다음 논문 ⟩

초록

The aim of this paper is to give a rigorous framework for the interpretation of limit analysis results including large displacements. The presentation is oriented towards unidimensional media (beams) but two-dimensional (plates) or three-dimensional media are also concerned. A single-degree-of-freedom system is first considered: it shows the basic phenomena of large displacement limit analysis or second-order limit analysis. The results are compared to those of a continuous system and the differences between both systems are discussed. Theoretical results are obtained using the kinematical approach of limit analysis. An admissible load-displacement plane is then defined, according to the yield design theory. The methodology used is applied to frame structures. The presented results are nevertheless different from those already published in the literature, as the virtual displacement field can be distinguished from the displacement field at collapse. The simplicity of large displacement limit analysis makes it attractive for practical engineering applications. The load-displacement upper bound can be used for instance in the optimal design of steel frames in seismic areas.

키워드

참고문헌

  1. Antman, S.S. (1995), Nonlinear Problems of Elasticity, Springer-Verlag, New-York.
  2. Arakelian, V. (1997), Structure et cinematique des mecanismes, Hermes, Paris (in French).
  3. Bazant, Z.P. and Cedolin, L. (2003), Stability of Structures: Elastic, Inelastic, Fracture and Damage Theories, Dover Publications, New-York.
  4. Bernal, D. (1987), "Amplification factors for inelastic dynamic p-delta effects in earthquake analysis", Earthq. Eng. Struct. Dyn., 15, 635-651. https://doi.org/10.1002/eqe.4290150508
  5. Calladine, C.R. (1968), Simple Ideas in the Large-deflection Plastic Theory of Plates and Slabs, in: Heyman, J., Leckie, F.A., editors, Engineering Plasticity, Cambridge University Press, 93-127.
  6. Chakrabarty, J. (2007), Applied Plasticity, Mechanical Engineering Series, Springer.
  7. Challamel, N. (2006), "Large displacement limit analysis of frame structures", Stability and Ductility of Steel Structures, D. Camotim et al. (Eds), Lisbon, Portugal, September 6-8, 2006.
  8. Challamel, N. and Pijaudier-Cabot, G. (2006), "Stability and dynamics of a plastic softening oscillator", Int. J. Solids Struct., 43, 5867-5885. https://doi.org/10.1016/j.ijsolstr.2005.09.005
  9. Chan, S.L. and Zhou, Z.H. (2004), "Elastoplastic and large deflection analysis of steel frames by one element per member II: Three hinges along member", J. Struct. Eng., 130(4), 545-553. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:4(545)
  10. Chiou, Y.J., Wang, Y.K., Hsiao, P.A. and Chen, Y.L. (2002), "Large displacement analysis of inelastic frame structures by convected material frame approach", Struct. Eng. Mech., 13(2), February.
  11. Climenhaga, J.J. and Johnson, P.P. (1972), "Moment-rotation curves for locally buckling beams", J. Struct. Div. 98, 1239-1254.
  12. De Freitas, J.A.T. and Smith, D.L. (1984), "Existence, uniqueness and stability of elastoplastic solutions in the presence of large displacements", Solid Mech. Arch., 9, 433-450.
  13. Duszek, M.K. and Lodygowski, T. (1983), On Influence of Some Second Order Effects on the Post-yield Behaviour of Plastic Structures, in: Sawczuk, A., Bianchi, G., editors, Plasticity today - Modelling, Methods and Applications, Elsevier Applied Science Publishers, 413-428.
  14. Elnashai, A.S. (2001), "Advanced inelastic static (pushover) analysis for earthquake applications", Struct. Eng. Mech., 12(1), July.
  15. Farmer, S.M. and Calladine, C.R. (2005), "Geometry of "developable cones", Int. J. Mech. Sci., 47, 509-520. https://doi.org/10.1016/j.ijmecsci.2005.02.013
  16. Feng, L. and Tong-Xi, Y. (1991), "An analysis of the large deflection of an elastic-plastic cantilever subjected to an inclined concentrated force", Appl. Math. Mech., 12(6), 547-555. https://doi.org/10.1007/BF02015568
  17. Gurkok, A. and Hopkins, H.G. (1973), "The effect of geometry changes on the load carrying capacity of beams under transverse load", SIAM J. Appl. Math., 25(3), 500-521. https://doi.org/10.1137/0125050
  18. Horne, M.R. (1963), "Elastic-plastic failure loads of plane frames", Proc. Roy. Soc. London, Serie A, 274, 343-364. https://doi.org/10.1098/rspa.1963.0136
  19. Horne, M.R. and Merchant, W. (1965), The Stability of Frames, Pergamon Press, Oxford.
  20. Horne, M.R. (1995), The Rankine-Merchant Load and Its Application, In Summation Theorems in Structural Stability, Ed. T. Tarnai, 111-139 (CISM Courses and Lectures No. 354. Springer-Verlag, Wien, New York).
  21. Jennings, P.C. and Husid, R. (1968), "Collapse of yielding sructures under earthquakes", J. Eng. Mech. Div., ASCE, 94, 1045-1065.
  22. Jirasek, M. and Bazant, Z.P. (2002), Inelastic Analysis of Structures, Wiley, New-York.
  23. Lance, R.H. and Soechting, J.F. (1970), "A displacement bounding principle in finite plasticity", Int. J. Solids Struct., 6, 1103-1118. https://doi.org/10.1016/0020-7683(70)90050-8
  24. Leu, L.J. and Tsou, C.H. (2001), "Second order analysis of planar steel frames considering the effect of spread of plasticity", Struct. Eng. Mech., 11(4), 423-442. https://doi.org/10.12989/sem.2001.11.4.423
  25. Liew, R.J.Y., White, D.W. and Chen, W.F. (1993), "Second-order refined plastic-hinge analysis for frame design", J. Struct. Eng., 119(11), 3196-3216. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:11(3196)
  26. Maier, G. and Drucker, D.C. (1973), "Effects of geometry changes on essential features of inelastic behaviour", J. Eng. Mech. Div., ASCE, 99, 819-834.
  27. Massonnet, C. and Save, M. (1961), Calcul plastique des constructions, Centre Belgo-Luxembourgeois d'information de l'acier, Bruxelles (in French).
  28. Mazzolani, F.M. and Gioncu, V. (2002), Ductility of Seismic-resistant Steel Structures, Spon Press, London.
  29. Merchant, W. (1954), "The failure load of rigid jointed frameworks as influenced by stability", Struct. Eng., 32, 185-190.
  30. Onat, E.T. (1955), "On certain second-order effects in the limit design of frames", J. Aeronaut. Sci., 22, 681-684. https://doi.org/10.2514/8.3434
  31. Polizzotto, C. and Borino, G. (1996), "Shakedown and steady-state response of elastic-plastic solids in large displacements", Int. J. Solids Struct., 33, 3415-3437. https://doi.org/10.1016/0020-7683(95)00185-9
  32. Salençon, J. (1966), "Expansion quasi-statique d'une cavité dans un milieu élastoplastique", Annales des Ponts et Chaussees, 3, 175-187 (in French).
  33. Salençon, J. (1990), "An introduction to the yield design theory and its application to soil mechanics", Eur. J Mech A/Solids, 9(5), 477-500.
  34. Salencon, J. (2002), De l'elastoplasticite au calcul a la rupture, Editions de l'Ecole Polytechnique, Ellipses, Paris, 2002 (in French).
  35. Save, M.A., Massonnet, C.E. and de Saxce, G. (1997), Plastic Limit Analysis of Plates, Shells and Disks, North-Holland Series in Applied Mathematics and Mechanics, Elsevier, Amsterdam.
  36. Shanmugan, N.E. and Wang, C.M. (2005), Analysis and Design of Plated Structures (Volume 1: Stability), Woodhead Publishing Limited.
  37. Siemaszko, A. and König, J.A. (1982), "Analysis of stability of incremental collapse of skeletal structures", J. Struct. Mech., 13, 301-312.
  38. Wang, B., Lu, G. and Yu, T.X. (1995), "A numerical analysis of the large deflection of an elastoplastic cantilever", Struct. Eng. Mech., 3(2), March.
  39. Weichert, D. (1990), "Unified formulation of statical shakedown criteria for geometrically nonlinear problems", Int. J. Plast., 6, 433-447. https://doi.org/10.1016/0749-6419(90)90012-4
  40. Yang, Y.B., Yau, J.D. and Leu, L.J. (2003), "Recent developments in geometrically nonlinear and postbuckling analysis of framed structures", Appl. Mech. Rev., 56(4), 431-449. https://doi.org/10.1115/1.1578498
  41. Yu, T.X. and Johnson, W. (1982), "The plastica: The large elastic-plastic deflection of a strut", Int. J. Non-linear Mech., 17, 195-209. https://doi.org/10.1016/0020-7462(82)90019-1
  42. Yu, T.X. and Zhang, L.C. (1996), Plastic Bending - Theory and Applications, Series on Engineering Mechanics, Vol. 2, World Scientific, Singapore.
  43. Zhou, Z.H. and Chan, S.L. (2004), "Elastoplastic and large deflection analysis of steel frames by one element per member I: One hinge along member", J. Struct. Eng. 130(4), 538-544. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:4(538)
  44. Ziegler, H. (1968), Principles of Structural Stability, Blaisdell Publishing Company, London.

피인용 문헌

  1. Concurrent flexural strength and deformability design of high-performance concrete beams vol.40, pp.4, 2011, https://doi.org/10.12989/sem.2011.40.4.541
  2. Flexural Strength and Deformability Design of Reinforced Concrete Beams vol.14, 2011, https://doi.org/10.1016/j.proeng.2011.07.176
  3. Buckling and post-buckling of gradient and nonlocal plasticity columns experiencing softening vol.51, pp.23-24, 2014, https://doi.org/10.1016/j.ijsolstr.2014.07.020