DOI QR코드

DOI QR Code

Fractal and laboratory analyses of the crushing and abrasion of granular materials

  • Vallejo, Luis E. (Department of Civil and Environmental Engineering, University of Pittsburgh) ;
  • Chik, Zamri (Department of Civil and Environmental Engineering, University of Pittsburgh)
  • 투고 : 2008.10.30
  • 심사 : 2009.11.27
  • 발행 : 2009.12.25

초록

Gravels forming part of the base of flexible pavements experience abrasion and crushing as a result of static and dynamic loads. Abrasion takes place when the sharp corners of the particles of gravel are removed as a result of compressive and shear loads. As a result of abrasion, the particles change in shape. Crushing is caused by the fragmentation of the particles into a mixture of many small particles of varying sizes. In this study, the abrasion and crushing of gravels are evaluated experimentally and analytically. The laboratory component of this study involves gravels that were subjected to abrasion and dynamic compression tests. The evaluation of the abrasion and crushing experienced by the gravel was carried out using fractals. In this study, the fractal dimension concept from fractal theory is used to evaluate: (a) the changes in shape, and (b) the crushing (fragmentation) of the original particles of gravel. It was determined that the fractal dimension of the profile of the particles decreased as a result of abrasion. With respect to crushing, the fragmentation fractal dimension was found to increase with the degree of breakage of the gravel. To understand the influence of crushing on the permeability of the gravels, the hydraulic conductivity of the gravels was measured before and after crushing. The hydraulic conductivity of the gravels was found to decrease with an increase in their level of crushing. Also, changes in the angle of friction of the granular materials as a result of abrasion was calculated using the Krumbein's roundness chart. The angle of friction of the granular materials was found to decrease as a result of abrasion.

키워드

참고문헌

  1. Bohac, J., Feda, J. and Kuthan, B. (2001), "Modelling of grain crushing and debonding", Proceedings of the 15th International Conference on Soil Mechanics and Geotechnical Engineering, Istanbul, August.
  2. Bolton, M.R. (1999), "The role of micro-mechanics in soil mechanics", Proceedings of the International Workshop on Soil Crushability, Yamaguchi, July.
  3. Brown, S.F. and Pappin, J.W. (1981), "Analysis of pavements with granular bases", Transport. Res. Rec., 810, 17-23.
  4. Cedergren, H.R. (1994), "America's pavements: world's longest bathtubs", Civil Eng., 64(9), 56-58.
  5. Cecconi, M. and Viggiani, G.M.B. (2001), "Structural features and mechanical behaviour of a pyroclastic weak rock", Int. J. Numer. Anal. Meth. Geomech., 25, 1525-1557. https://doi.org/10.1002/nag.185
  6. Cecconi, M., DeSimone, A., Tamagnini, C. and Viggiani, G.M.B. (2002), "A constitutive model for granular material with grain crushing and its application to pyroclastic soil", Int. J. Numer. Anal. Meth. Geomech., 26, 1531-1560. https://doi.org/10.1002/nag.257
  7. Coop, M.R. (1999), "The influence of particle breakage and state on the behavior of sands", Proceedings of the International Workshop on Soil Crushability, Yamaguchi, July.
  8. Cundall, P.A. and Strack, O.D.L. (1979), "A discrete numerical model for granular Assemblies", Geotechnique, 29(1), 47-65. https://doi.org/10.1680/geot.1979.29.1.47
  9. DeSimone, A. and Tamagnini, C. (2005), "Stress-dilatancy based modeling of granular materials and extensions to soils with crushable grains", Int. J. Numer. Anal. Meth. Geomech., 29, 73-101. https://doi.org/10.1002/nag.405
  10. Hyslip, J.P. and Vallejo, L.E. (1997), "Fractal analysis of the roughness and size distribution of granular materials", Eng. Geol., 48(3-4), 231-244. https://doi.org/10.1016/S0013-7952(97)00046-X
  11. Krumbein, W.C. (1941), "Measurement and geological significance of shape and roundness of sedimentary particles", J. Sediment, Pet., 11, 64-72.
  12. Lade, P.V., Yamamuro, J.A. and Bopp, P.A. (1996), "Significance of particle crushing in granular materials", J. Geotech. Eng., 122(4), 309-316. https://doi.org/10.1061/(ASCE)0733-9410(1996)122:4(309)
  13. Lee, K.L. and Farhoomand, J. (1967), "Compressibility and crushing of granular soils in anisotropic triaxial compression", Can. Geotech. J., 4(1), 68-86. https://doi.org/10.1139/t67-012
  14. Lobo-Guerrero, S. and Vallejo, L.E. (2005), "DEM simulation of crushing of granular materials under direct shear stress conditions", J. Geotech. Geoenviron, 131(10), 1295-1300. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:10(1295)
  15. Mandelbrot, B.B. (1977), Fractals: forms, chance and dimension. San Francisco, Freeman.
  16. McDowell, G.R., Bolton, M.D. and Robertson, D. (1996), "The fractal crushing of granular materials", Int. J. Mech. Phys. Soild., 44(12), 2079-2102. https://doi.org/10.1016/S0022-5096(96)00058-0
  17. Ramamurthy, T. (1969), "Crushing phenomena in granular soils", J. Indian Soc. Soil Mech. Found. Eng., 8(1), 67-86.
  18. Raymond, G.P. (2000), "Track and support for a mine company railroad", Can. Geotech. J., 37, 318-332. https://doi.org/10.1139/t99-108
  19. Santamarina, J.C. and Cho, G.C. (2004), "Soil behaviour: the role of particle shape", Proceedings of the Skempton Conference, London, March.
  20. Tyler, S.W. and Wheatcraft, S.W. (1992), "Fractal scaling of soil particle-size distibution analysis and limitations", Soil. Sci. Soc. Am. J., 56(2), 47-67. https://doi.org/10.2136/sssaj1992.03615995005600010006x
  21. Vallejo, L.E. (1995), "Fractal analysis of granular materials", Geotechnique, 45(1), 159-164. https://doi.org/10.1680/geot.1995.45.1.159
  22. Vallejo, L.E. (1996), "Fractal analysis of the fabric changes in a consolidating clay", Eng. Geol., 43, 281-290. https://doi.org/10.1016/S0013-7952(96)00038-5
  23. Vallejo, L.E. (2001), "Fractal assessment of the surface texture of pavements", Int. J. Pavement. Eng., 2(2), 149- 156. https://doi.org/10.1080/10298430108901723
  24. Yeggoni, M., Button, J.W. and Zollinger, D.G. (1996), "Fractals of aggregates correlated with creep in asphalt concrete", J. Transp. Eng-ASCE, 122(1), 22-27. https://doi.org/10.1061/(ASCE)0733-947X(1996)122:1(22)

피인용 문헌

  1. Fractal evaluation of the level of alligator cracking in pavements vol.4, pp.3, 2012, https://doi.org/10.12989/gae.2012.4.3.219
  2. Loading Capacity and Deformation Characteristics of Tailings Based on a Fractal Geometrical Analysis of the Particle Microstructure vol.5, pp.4, 2015, https://doi.org/10.3390/min5010086
  3. Experimental Study on Energy Consumption of Rock Cutting under Different Groove Geometry vol.43, pp.1, 2019, https://doi.org/10.1520/GTJ20180214
  4. The effectiveness of geosynthetic reinforcement, tamping, and stoneblowing of railtrack ballast beds under dynamic loading: DEM analysis vol.2, pp.3, 2009, https://doi.org/10.12989/gae.2010.2.3.161
  5. On the use of asphalt concrete mixes (according to the PNST) vol.1159, pp.1, 2009, https://doi.org/10.1088/1757-899x/1159/1/012017
  6. Effect of underground stress transfer through artificial manipulation of particle size distribution vol.26, pp.2, 2009, https://doi.org/10.12989/gae.2021.26.2.205