Abstract
Fractures and segmentation in association with the activities of the Yangsan fault are studied around Mt. Namsan, Gyengju city in the southeastern part of Korea. It is believed that the higher values of joint density and fractal dimension with the approach of the center of the Yangsan fault mean intense fracturing due to the fault activity. The boundary between fault damage zone and host rock is inferred to be placed at about 2.7 km from the center of the Yangsan fault where the values of joint density and fractal dimension abruptly decrease and the orientations of joint are also much dispersed. The small faults within the damage zone of the Yangsan fault are definitely divided into right-lateral and left-lateral strike-slip faults. The former is considered to be formed during the right-lateral movement of the Yangsan fault and the latter during the left-lateral movement. The Yangsan fault is segmented in the study area with obvious evidences as follows: (1) the difference of fault strike between northern and southern segments, (2) The geometry of contractional imbricate fans and syncline plunging $9^{\circ}$, $S85^{\circ}E$ at the end of northern segment, and (3) anticline plunging $28^{\circ}$, $N4^{\circ}W$ at the end of southern segment.
경주시 남산 일대에서 양산단층의 활동에 수반된 단열 특성과 양산단층의 분절에 관한 연구가 수행되었다. 절리의 밀도와 프랙탈 차원 값은 양산단층에 가까워질수록 높은 값을 보이는데 이는 단층활동에 따른 단열작용이 단층의 중심에서 더 격렬하게 일어난 탓으로 해석할 수 있다. 양산단층 손상대와 모암 사이의 경계는 단층의 중심에서 약 2.7 km까지로 볼 수 있으며 여기서 더 멀어지면 절리밀도와 프랙탈 차원 값이 현저히 감소하고 절리의 배향도 여러 방향으로 크게 분산된다. 양산단층 손상대 내 소단층들은 우수향이동단층과 좌수향이동단층들로 뚜렷이 구분되는데, 전자는 양산단층이 우수향이동을 할 때 수반된 단층들이고 후자는 좌수향이동 운동 시에 수반된 것들로 간주된다. 연구지역에서 양산단층은 북쪽분절과 남쪽분절로 나누어 질 수 있는데 이는 북쪽분절과 남쪽분절 간 주향의 차이, 북쪽분절 끝부분에서 압축성 인편팬기하와 $9^{\circ}$, $S85^{\circ}E$로 선경사하는 향사의 발달, 남쪽분절 끝부분에서 $28^{\circ}$, $N4^{\circ}W$로 선경사하는 배사의 발달 등의 증거에 의해 뒷 밭침 할 수 있다.