References
- Daewoo Machine Tool Institute, "Development of high-stiffness feed mechanism and high speed spindle", Research Report, 2003. (in Korean)
- Youn Cheol Park, Young Chul Kim and Man Ki Min, "Performance analysis on multi-type inverter air conditioner", Energy Conversion and Management, pp. 1697-1682, 2001 https://doi.org/10.1016/S0196-8904(00)00147-3
- S. W. Lee and H. K. Yeom, "Performance of thermal error controller to minimize thermal deformation of machine tools", Proceedings of Korean Society for Precision Engineering (Spring), pp. 376-380, 2008. (in Korean)
- M. Yaqub, S. M. Zubair and Jameel -ur-Rehman Khan, "Performance evaluation of hot-gas bypass capacity control scheme for refrigeration and airconditioning systems", Energy, vol. 25, pp. 543-561, 2000 https://doi.org/10.1016/S0360-5442(00)00004-9
- M. Yaqub, S. M. Zubair and S. H. Khan, "Second-law-based thermodynamic analysis of hot-gas by pass, capacity-control schemes for refrigeration and air-conditioning systems". Energy-The International Journal, vol. 20, no. 6, pp. 483-493, 1998 https://doi.org/10.1016/0360-5442(94)00091-G
- S. W. Lee and C .W. Lee, "Assessment capability of oil cooler with hot-gas", Proceedings of Korean Society for Precision Engineering, No. 6, pp. 459-460, 2007. (in Korean)
Cited by
- Precise Temperature Control of Oil Coolers with Hot-gas Bypass Manner for Machine Tools Based on PI and Feedforward Control vol.23, pp.2, 2011, https://doi.org/10.6110/KJACR.2011.23.2.111
- Comparison of System Performances of Hot-gas Bypass and Compressor Variable Speed Control of Water Coolers for Machine Tools vol.24, pp.1, 2012, https://doi.org/10.6110/KJACR.2012.24.1.001
- Comparison of system performance on hot-gas bypass and variable speed compressor in an oil cooler for machine tools vol.28, pp.2, 2014, https://doi.org/10.1007/s12206-013-1136-1
- PI Controller Design Based on Characteristic Parameters and Zero Position Adjustment for an Oil Cooler System vol.20, pp.4, 2016, https://doi.org/10.9726/kspse.2016.20.4.083
- 상태공간 모델링에 의한 공작기계용 수냉각기의 최적제어기 설계 vol.23, pp.12, 2009, https://doi.org/10.6110/kjacr.2011.23.12.782
- 외란을 고려한 냉동시스템의 최적 PI 제어기 설계 vol.25, pp.2, 2009, https://doi.org/10.6110/kjacr.2013.25.2.085
- GA를 이용한 오일쿨러시스템의 최적 PI제어기 설계 vol.18, pp.5, 2009, https://doi.org/10.9726/kspse.2014.18.5.028
- PI Controller Design of the Refrigeration System Based on Dynamic Characteristic of the Second Order Model vol.18, pp.6, 2009, https://doi.org/10.9726/kspse.2014.18.6.200
- An experiment investigation of temperature control performance for machine tool oil coolers with hot-gas bypass temperature control scheme and inverter temperature control scheme vol.35, pp.2, 2009, https://doi.org/10.1007/s12206-021-0137-8