한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제18권6호
  • /
  • Pages.585-589
  • /
  • 2009
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지

CFD를 이용한 고분자 압출기 Dies 최적설계에 관한 연구

A Study on Optimal Design of Polymer Extruder Dies by CFD

  • 김재열 (조선대학교 메카트로닉스공학과) ;
  • 최진호 (조선대학교 대학원 첨단부품소재공학과)
  • 발행 : 2009.12.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Extruder is divided to greatly three part at extrusion process. First, by hopper(Hopper) second, barrel(Barrel) with Screw that is point of extruder and third that is raw material supply wealth extrusion into dies(DIES) Part that decide shape of do product greatly divide. Hopper is role that distribute in raw material supply wealth (Feeding zone) of Screw preserving raw material in state of high quality how at extrusion process, and make distributed raw material as Screw in barrel rotates and 3 stage and inflicting heat and pressure raw material melting(Melting) state. And raw material of melting state Screw's measuring stoker(Metering zone) whereabouts anaphora do and product is completed through pipe channel of dies. Dies that is the most important as Screw in extrusion is part that is last part of melting state process of raw material and causes huge effect in quality of product. If more than design of dies happens, manufacture itself of dies is hard, but there are a lot of amount of losses accordingly. In this research, make pipe channel that raw material of melting state flows in dies can present dies basic design method through flow analysis of ideal pipe channel using CFdesign.

키워드

참고문헌

  1. Varady, T., Ralph, R., and Jordan, C., 1997, "Reverse engineering of geometric models an introduction," Computer-Aided Design, Vol. 29 No. 4, pp. 255-268.
  2. Piegl, L. and Tiller, W., 1996, "Algorithm for approximate NURBS skinning," Computer-Aided Design, Vol. 28, No. 9, pp. 699-706.
  3. Werner, A., Skalski, K., Piszezatowski, S., Swieszkowski, W., and Lechmiak, Z., 1998, "Reverse engineering of free-from surfaces," Journal of Materials Processing Technology, Vol. 76, pp. 128-132.
  4. Liu, S. and MA, W. 1999, "seep-growing segmentation of 3-D surfaces from CT-contour date," Computer-Aided Design, Vol. pp. 517-536.
  5. Yoon, J. B., 2000, "Simulation of Heat and Fluid Flow in the Single Screw Extruder with Coupling of the Metering Section and Die". Graduate School, Hanyang Univ
  6. Yoon, J. Y., Hwang, Y. K., Park, J. S., Ko, T. J. and Park, J. W., 2002, "An Integrated CAD System for Design of Extruder Screw," Journal of Korean Society of Precision Engineering, Vol. 19, No. 8., p. 100.
  7. Kim, C. K., Cho, S. H. , 2002, "Numerical Study on the Behavior Characteristics of a Screw in Injection Molding Machine," J. of KSMTE, Vol. 11, No. 5, pp. 30-37.