• Journal of the Korean Society of Combustion
• /
• v.12 no.3
• /
• pp.24-32
• /
• 2007

A theoretical model was developed for rotary kiln and computational study was conducted to find the effect of feeding characteristics. One dimensional model with the variations of heating distribution, length of heating zone, excess air ratio and revolution was considered. The comparison of parallel-flow rotary kiln with that of counter-flow was conducted. For parallel-flow type, it is found that the variation of temperature of solid is not great for the zone that is following flame-heating zone. This zone is good to take the special treatment because thermal deviation is small and contacting time is enough for another treatment. Increase of excess air ratio have the effect of decreasing solid temperature. But this effect of decreasing solid temperature goes small for the great excess air ratio. The heating is efficient for the flame which has the maximum heating at the central region of the full length.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2001.05a
• /
• pp.315-316
• /
• 2001

To understand feeding habits of Cheaenogobius mororanus, this study has been conducted by analyzing stomach contents. C. mororanus were monthly collected from the intertidal zone of Dodun-ri, Sochon from May 1997 to April 1998. Fullness of stomach was increased twice a day, in the morning and afternoon. C. mororanus(1.0 ∼5.9 cm in standard length) was a carnivores consuming mainly decapods, amphipods and copepods. (omitted)

• Asian-Australasian Journal of Animal Sciences
• /
• v.2 no.3
• /
• pp.325-326
• /
• 1989

• Korean Journal of Ichthyology
• /
• v.28 no.2
• /
• pp.87-92
• /
• 2016

The feeding habits of Boleophthalmus pectinirostris were studied using 198 specimens collected monthly from April 2014 to March 2015 in the intertidal zone of Beolgyo, Korea. The size of B. pectinirostris ranged from 6.5 to 18.7 cm in total length (TL, cm). B. pectinirostris was herbivore that consumes mainly centric and pennate diatoms. Its diets also included small quantities of Prorocentrum dinoflagellates. and nematods. B. pectinirostris predominantly consumed diatoms (mainly Pleurosigma spp., Navicula spp., Nitzschia spp., Gyrosigma spp.) in all fish size classes, and all months, and thus there were no significant diet changes in relation to size and month.

• Journal of the Korean Society of Combustion
• /
• v.7 no.3
• /
• pp.16-22
• /
• 2002

Combustion performance of an internally cycloned circulating fluidized bed for paper sludge was discussed through a series of batch type experiments. Operation parameters such as water content, feeding mass of sludge and secondary air injection rate were varied to find out the effect on the combustion performance, which was examined with carbon conversion rate and pollutant emission such as CO and NOx. A conventional solid fuel reaction was observed in the experiments of varying water content and feeding mass of the sludge, which is characterized with kinetic limited reaction zone, diffusion limited reaction zone and transition zone. Secondary air injection with swirl enhances the mixing of the gas phase as well as the solid phase, and improves combustion efficiency accompanied with higher carbon conversion rate and lower pollutant emission rate.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.6
• /
• pp.585-589
• /
• 2009

Extruder is divided to greatly three part at extrusion process. First, by hopper(Hopper) second, barrel(Barrel) with Screw that is point of extruder and third that is raw material supply wealth extrusion into dies(DIES) Part that decide shape of do product greatly divide. Hopper is role that distribute in raw material supply wealth (Feeding zone) of Screw preserving raw material in state of high quality how at extrusion process, and make distributed raw material as Screw in barrel rotates and 3 stage and inflicting heat and pressure raw material melting(Melting) state. And raw material of melting state Screw's measuring stoker(Metering zone) whereabouts anaphora do and product is completed through pipe channel of dies. Dies that is the most important as Screw in extrusion is part that is last part of melting state process of raw material and causes huge effect in quality of product. If more than design of dies happens, manufacture itself of dies is hard, but there are a lot of amount of losses accordingly. In this research, make pipe channel that raw material of melting state flows in dies can present dies basic design method through flow analysis of ideal pipe channel using CFdesign.

• Journal of Aquaculture
• /
• v.13 no.4
• /
• pp.309-316
• /
• 2000

Feeding habits of A. luridus were studied by analyzing the stomach contents of monthly collected fish from the intertidal zone of Dodun-ri, Sochon from July 1996 to June 1997. Fullness of stomach increased twice a day, first in the morning and second in the afternoon. A. luridus (1.2-5.9 em in standard length) was a carnivore consuming mainly decapods (natantia larvae, Acetes japonicus, Penaeus japonicus and reptantia larvae), amphipods (caprellids, gammarids and hyperiids) and copepods (Acartia sp., Calanus sinicus, Corycaeus affinis, and Microsetella sp.). Its diets also included minor quantities of isopods, cirriped larvae, polychaete larvae and stomatopods. According to fish size, some changes in feeding habits were apparent, i.e. smaller fish preferred to prey in the following order : copepods < decapods < amphipods. However, as the size increased, decapods and amphipods were selected.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1617-1618
• /
• 2015

This paper analyzed catenary impedance characteristics of relays installed in substation and sectioning post to protect power feeding circuit in the extended power feeding conditions. For this, we modelled AT feeding system using PSCAD/EMTDC and calculated catenary impedance. The relay installed in substation calculated catenary impedance of the extended power feeding area adding catenary impedance of self protection zone. But, the relay installed in sectioning post calculated catenary impedance of the only protection area. Therefore, we confirmed that the more reliable protection way can be utilized using the relay installed in sectioning post.

• Journal of Welding and Joining
• /
• v.18 no.3
• /
• pp.83-88
• /
• 2000

Laser cladding processing allows rapid transfer of heat to the material being processed with minimum conduction into base metal, resulting in low total heat input. The effects of Nd:YAG laser cladding with wire feeding on the mechanical properties of Inconel alloy were investigated. inconel alloy is used as the material of nuclear steam generator tubing because of its mechanical properties and corrosion resistance properties. The device for Nd:YAG laser cladding with wire feeding was designed. It consists of the wire feeding system, the wire cladding system and the shielding gas system which prevents the clad layer from being oxidized. Experimental as results indicated that the wire feeding direction and position were important for laser cladding with wire feeding. The wire feeding speed should be adapted according to cladding speed for good shaping of clad layer. The effect of heat on the HAZ size can be limited and the growth of grain size of HAZ size was not serious. The hardness of clad layer and heat affected zone increased with increasing of cladding speed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.3 no.2
• /
• pp.117-124
• /
• 1993

It was found that the basic principle of continuous crystal growth method was following as; the powder supplied from the feeding system is molten in the graphite crucible under the ambient gas. After forming the molten zone in the lower part of the crucible, the seed crystal is deeped into the melt and pulled down with the rotation so that the melt crystallized from the seed. When the lowering rate, rotation rate, feeding rate and temperature are correct, the single crystal can grow. The critical melt level, the feeding rate, the growth rate, the change of the shape of molten zone by the graphite susceptor and crucible, the position of work coil, the balance between the gravitational force of melt and the centrifugal force originated from the rotation of seed which are the variables of the crystal growth and the sintering phenomenon of melt surface were researched.