A Study on the PCBs-containing Waste Treatment by High Temperature Incineration

고온소각에 의한 PCBs 함유 폐기물처리에 관한 연구

  • 김성중 (인천대학교 안전공학과) ;
  • 김동혁 (인천대학교 안전공학과)
  • Received : 2009.03.19
  • Accepted : 2009.03.28
  • Published : 2009.03.31

Abstract

This study is for understanding the domestic possibilities of the high temperature incineration of waste containing Polychlorinated Biphenyls (PCBs) with the analysis of normal operation case and waste gas, fly ash, dioxin about bottom ash, Total-PCBs, Co-PCBs, and the for analysis the heavy metal leaching feature included by bottom ash and fly ash, heavy metal leaching experiment was implemented. The result shows the dioxin density of the waste gas from waste containing PCBs was $0.00699{\sim}0.00763ng-TEQ/Nm^3$, which is lower than $0.0192ng-TEQ/Nm^3$ from the normal operation case. And each Co-PCBs and total PCBs shows $0.00043{\sim}0.00112ng-TEQ/Nm^3$ and $3.06{\sim}3.87ng/m^3$ respectively. The bottom ash test result shows Dioxin 0.00225~0.00630ng-TEQ/g, Co-PCBs 0.00027~0.00082ng-TEQ/g, Total PCBs 0.9~2.6ng/g, and the fly ash shows Dioxin 0.00164~0.00344ng-TEQ/g, Co-PCBs 0.00053~0.00054ng-EQ/g, Total PCBs 0.64~0.84ng/g. The bottom ash and fly ash experiments for heavy metal leaching did not show any leaching but when it comes to the ingredients of the fly ash, Pb elements shows 31.01~237.7ppm, higher than leaching criterion. The analysis of the density of all air pollution material from the waste gas shows the lower value than permissible criterion.

본 연구는 국내 유해폐기물 고온소각설비를 이용한 PCBs 함유 폐기물의 소각처리 가능성을 알아보기 위해 정상조업시와 PCBs 절연유 투입시의 배가스, 비산재, 바닥재에 대한 다이옥신, Total-PCBs, Co-PCBs 분석을 실시하였으며, 바닥재 및 비산재에 함유된 중금속 성분의 용출 특성을 파악하기 위하여 중금속 용출시험을 실시하였다. 그 결과 PCBs 함유폐기물의 배기가스 중의 Dioxin 농도는 $0.00699{\sim}0.00763ng-TEQ/Nm^3$으로 정상조업시 $0.0192ng-TEQ/Nm^3$보다 낮은 것으로 나타났으며 Co-PCBs $0.00043{\sim}0.00112ng-TEQ/Nm^3$, Total PCBs $3.06{\sim}3.87ng/m^3$으로 분석되었다. 바닥재의 경우에는 Dioxin 0.00225~0.00630ng-TEQ/g, Co-PCBs 0.00027~0.00082ng-TEQ/g, Total PCBs 0.9~2.6ng/g, 비산재의 경우 Dioxin 0.00164~0.00344ng-TEQ/g, Co-PCBs 0.00053~.00054ng- EQ/g, Total PCBs 0.64~0.84ng/g로 나타났다. 바닥재와 비산재의 중금속용출 시험결과 바닥재에서는 모두 용출되지 않았으나, 비산재의 경우 Pb성분이 31.01~237.7ppm으로 용출기준을 초과하는 것으로 나타났으며 대기오염물질의 농도는 모두 배출허용기준치 이하로 나타났다.

Keywords

References

  1. US EPA, "Toxic Substance Control Act Inventory, www.epa.gov/oppt/newchems /pubs/invntory.htm.
  2. V. den Berg, M. Birnbaum and A. Bosabel, Environmental Health perspectives, 106, pp. 775-792 (1998). https://doi.org/10.2307/3434121
  3. UNEP Chemicals, "Guidelines for the identification of PCBs and materials Containing PCBs" First Issue, UNEP, pp.1-19 (1999).
  4. UNEP Chemicals, "Survey of currently Available Non-Incineration PCB Destruction Technologies, UNEP, pp. 1-18 (2000).
  5. 정일록, 오길종, 신선경, "폴리염화비페닐류 (PCBs) 함유 폐기물의 관리 동향", 대한환경공학회 2006 추계학술연구발표회, pp. 779-781 (2006).
  6. 신선경, "국내.외 PCBs 처리기술현황", 한국화학공학회, 23(6), pp. 658-661 (2005).
  7. 신선경, 박진수, 강영렬, 황승률, 김영식, "PCBs 함유 절연유의 처리 후 부산물 배출특성 연구", 한국분석과학회, 19(3), pp. 263-271 (2006).
  8. 김진경, 박석운, 신선경, 전태완, "액상폐기물 중 폴리염화비페닐류(PCBs) 분석방법 고찰", 한국폐기물학회 2005 춘계학술연구회발표회, pp. 464-467 (2005).
  9. 국립환경연구원 "절연유 중 PCBs 세부분석지침", pp. 2-36 (2004).
  10. 김종국 , 윤길도 , 박종은 , 김경심, "환경 중 PCBs 오염 현황 및 분석 정도 관리", 한국환경 농학회 2008 추계워크샵, pp. 31-35 (2008).
  11. 환경부, "폐기물 공정시험방법" pp. 44-66. (2004).