사이드 밀링 커터를 이용한 워엄 스크루 가공에서 공구 런아웃이 표면조도에 미치는 영향분석

Investigation of Surface Roughness Characteristics according to Tool Runout Variations in Side Milling Cutter for Worm Screw

  • 김선호 (동의대학교 메카트로닉스공학과)
  • 투고 : 2009.09.21
  • 심사 : 2009.12.01
  • 발행 : 2009.12.30

초록

A worm screw is widely used in a geared motor unit for motion conversion from rotation to linear motion. For mass production of a high quality worm, the current roll forming process is substituted with the milling cutter process. Since the milling cutter process enables the integration of all machining operations of worm manufacturing on a CNC(Computer Numerical Control) lathe, productivity can be remarkably improved. The tooling system for side milling cutter on the CNC lathe to improve machinability is developed. However, the runout of spindle and cutting tips are important factors to be considered for producing high quality worms because the tooling system has multiple tips. In this study, surface roughness variations accuracy according to runout was investigated in side milling cutter for worm screw. The result shows by simulation and experiment.

키워드

참고문헌

  1. Wehmanm, R., "The Whirling Process for Improved Worm Gears," Gear Solutions Magazine, pp. 48-53, October 2003.
  2. Wehmanm, R., "The Whirling Process for Improved Worm Gears," Gear Solutions Magazine, pp. 48-53, October 2003.
  3. Kaldor, S., Rafael, A. M. and Messinger, D., "On the CAD of Profile for Cutters and Helical Flutes," Annals of the CIRP Vol. 37/1, pp. 53-56, 1988.
  4. Li, X. P. and Li, H. Z., "Theoretical modelling of cutting forces in helical end milling cutter with cutter runout," International Journal of Mechanical Sciences, Vol. 46, pp. 1399-1414, 2004. https://doi.org/10.1016/j.ijmecsci.2004.07.001
  5. Ahn, J. H., Kang, D. B., Lee, M. H., Kim, H. Y., Kim, S. H. and Cho, K. K., "Investigation of Cutting Characteristics in Side-milling cutter A Multi-thread Worm Shaft on Automatic Lathe," Annals of the CIRP, Vol. 55/1, pp. 63-66, 2006.
  6. Worm software operating manual, ver. 2.0, Klingelnberg, 2000.
  7. Germany standard, "Concepts and parameters associated with cylindrical gears and cylindrical gear pairs with involute teeth", DIN3960, 1980
  8. Jung, S. K. and Lee, S. H., "A Guide of shot peening Processing," Se Hwa Pub, pp. 6-12, 2001
  9. Conference on Shot peening, Vol. 1, Chicago, pp. 316-331, 1984.