DOI QR코드

DOI QR Code

플라즈마 용사 열차폐 코팅의 박리수명 평가에 관한 연구

Evaluation on the Delamination Life of Isothermally Aged Plasma Sprayed Thermal Barrier Coating

  • 김대진 (성균관대학교 기계공학부) ;
  • 신인환 (성균관대학교 기계공학부) ;
  • 구재민 (성균관대학교 기계공학부) ;
  • 석창성 (성균관대학교 기계공학부) ;
  • 김문영 (한전 KPS(주) G/T 정비기술센터 기술팀)
  • 발행 : 2009.02.01

초록

In this study, disk type of thermal barrier coating system for gas turbine blade was isothermally aged in the furnace changing exposure time and temperature. The aging conditions that delamination occurs were determined by the extensive microscopic analyses and bond tests for each aging condition. The delamination map was drawn from the time-temperature matrix form which summarize the delamination conditions. Finally, a method to draw the delamination life diagram of a thermal barrier coating system by using the delamination map was suggested.

키워드

참고문헌

  1. Martena, M., Botto, D., Fino, P., Sabbadini, S., Gola, M. M. and Badini, C., 2006, “Modelling of TBC system failure: Stress Distribution as a Function of TGO Thickness and Thermal Expansion Mismatch,” Engineering Failure Analysis, Vol. 13, No. 3, pp. 409-426 https://doi.org/10.1016/j.engfailanal.2004.12.027
  2. Gell, M., Jordan, E., Vaidyanathan, K., McCarron, K., Barber, B., Sohn, Y. H. and Tolpygo, V. K., 1999, “Bond Strength, Bond Stress and Spallation Mechanisms of Thermal Barrier Coatings,” Surface & Coatings Technology, Vols. 120-121, pp. 53-60 https://doi.org/10.1016/S0257-8972(99)00338-2
  3. Mats Eskner, Mechanical Behavior of Gas Turbine Coatings, Doctoral Thesis, 2004
  4. Stover, D., Pracht, G., Lehmann, H., Dietrich, M., Doring J. -E. and Vaben, R., 2004, “New Material Concepts for the Next Generation of Plasma-Sprayed Thermal Barrier Coatings,” Journal of Thermal Spray Technology, Vol. 13, No. 1, pp. 76-83 https://doi.org/10.1007/s11666-004-0052-4
  5. Sohn, Y. H., Kim, J. H., Jordan, E. H., Gell, M., 2001, “Thermal Cycling of EB-PVD/MCrAlY Thermal Barrier Coatings: 1. Microstructural Development and Spallation Mechanisms,” Surface and Coatings Technology, Vols. 146-147, pp. 70-78 https://doi.org/10.1016/S0257-8972(01)01478-5
  6. Baufeld, B., Tzimas, E., Mullejans, H., Peteves, S., Bressers, J. and Stamm, W., 2001, “Thermal-Mechanical Fatigue of MAR-M 509 with a Thermal Barrier Coating,” Materials Science and Engineering A, Vol. 315, pp. 231-239 https://doi.org/10.1016/S0921-5093(01)01208-4
  7. Kim, D. J., Lee, D. H., Koo, J. M., Song, S. J., Seok, C. S. and Kim, M.Y., 2008, “Evaluation of Bond Strength of Isothermally Aged Plasma Sprayed Thermal Barrier Coating,” Transactions of the KSME A, Vol. 32, No. 7, pp. 569-575 https://doi.org/10.3795/KSME-A.2008.32.7.569
  8. Kim, D. J., Seok, C. S., Lee, D. H., Koo, J. M., Kim, M. Y., Yang, S. H. and Park, S. Y., 2007, “Evaluation of a Degradation of Thermal Barrier Coating for Gas Turbine Blade,” Proceedings of the KSME Spring Annual Meeting, pp. 99-104
  9. Echsler, H., Renusch, D. and Schutze, M., 2000, “Bond Coat Oxidation and Its Significance for Life Expectancy of Thermal Barrier Coating Systems,” Materials Science and Technology, Vol. 20, pp. 307-318 https://doi.org/10.1179/026708304225012143
  10. Kim, M. Y., Park, S. Y. and Yang, S. H., 2006, “Properties Variation According to Heat Treatment for Gas Turbine Blade(Bucket) Material Of GTD-111DS,” Transactions of the KSME A, Vol. 30, No. 3, pp. 349-355 https://doi.org/10.3795/KSME-A.2006.30.3.349

피인용 문헌

  1. Thermal Barrier Coating Durability Testing Trends for Thrust Chamber of Liquid-propellant Rocket Engine vol.17, pp.1, 2013, https://doi.org/10.6108/KSPE.2013.17.1.103
  2. Top Coating Design Technique for Thermal Barrier of Gas Turbine vol.30, pp.8, 2013, https://doi.org/10.7736/KSPE.2013.30.8.802
  3. Quantitative analysis on the depletion rate of β-NiAl phases in MCrAlY coating vol.28, pp.2, 2014, https://doi.org/10.1007/s12206-013-1118-3
  4. Durability Evaluation of Thermal Barrier Coating (TBC) According to Growth of Thermally Grown Oxide (TGO) vol.38, pp.12, 2014, https://doi.org/10.3795/KSME-A.2014.38.12.1431
  5. Morphological Observation on Tribological Characteristic of Thermal Spray Coated Steel-Bar vol.38, pp.5, 2014, https://doi.org/10.3795/KSME-A.2014.38.5.559
  6. Life prediction of thermal barrier coating considering degradation and thermal fatigue vol.17, pp.2, 2016, https://doi.org/10.1007/s12541-016-0031-y
  7. TBC delamination life prediction by stress-based delamination map vol.4, pp.1, 2017, https://doi.org/10.1007/s40684-017-0009-y
  8. Life Prediction Method for Thermal Barrier Coating of High-Efficiency Eco-Friendly Combined Cycle Power Plant pp.2198-0810, 2019, https://doi.org/10.1007/s40684-019-00066-9