References
- J. Lee, W. Shimoda and T. Tanaka, Mater. Trans., 45(9), 2864(2004) https://doi.org/10.2320/matertrans.45.2864
- I. G. Kaban, S. Gruner and W. Hoyer, Monatsh. Chem., 136(11), 1823(2005) https://doi.org/10.1007/s00706-005-0378-8
- M. Kucharski and P. Fima, Monatsh. Chem., 136(11), 1841(2005) https://doi.org/10.1007/s00706-005-0393-9
- Z. Moser, W. Gasior and J. Patrus, J. Phase Euqil., 22(3), 254(2001) https://doi.org/10.1361/105497101770338734
- R. M. German, Powder Metallurgy Science, 2nd ed., p.100, Metal Powder Industries Federation, Princeton, New Jersey, U.S.A., (1994)
- G. Bernard, C.H.P. Lupis, Metall. Trans., 2(11), 2991(1971) https://doi.org/10.1007/BF02814945
- R. Sangiorgi, A. A. Passerone and M. L. Muolo, Acta Metall., 30(8), 1597(1982) https://doi.org/10.1016/0001-6160(82)90180-8
- H. Timatsu, M. Abe, F. Nakatani, K. Ogino, J. Jpn. Inst. Metals, 49(7), 523(1985) https://doi.org/10.2320/jinstmet1952.49.7_523
- S. P. Mehrotra, A. C. D. Chaklader, Metall. Trans. B, 16B(3), 567(1985) https://doi.org/10.1007/BF02654855
- D. Chatain, F. Chabert and V. Ghetta, J. Am. Ceram. Soc., 77(1), 197 (1994) https://doi.org/10.1111/j.1151-2916.1994.tb06977.x
- L. Goumiri, J. C. Joud, Acta Metall., 30(7), 1397(1982) https://doi.org/10.1016/0001-6160(82)90160-2
- K. Momma, H. Suto, J. Jpn. Inst. Metals, 24(6), 377(1960) https://doi.org/10.2320/jinstmet1952.24.6_377
- T. E. O'Brien, A. C. D. Chaklader, J. Am. Ceram, Soc., 57(8), 329(1974) https://doi.org/10.1111/j.1151-2916.1974.tb10915.x
- Z. Morita, A. Kasama, J. Jpn. Inst. Metals, 40(8), 787(1976) https://doi.org/10.2320/jinstmet1952.40.8_787
- B. Gallios, C. H. P. Lupis, Metall. Trans. B, 12(3), 549(1981) https://doi.org/10.1007/BF02654326
- K. Ogino, H. Taimatsu, F. Nakatani, J. Jpn. Inst. Metals, 46(10), 957(1982) https://doi.org/10.2320/jinstmet1952.46.10_957
- P. Kozakevitch, G. Urbain, Mem. Sci. Rev. Met., 58, 517(1961)
- B. J. Keen, K. C. Mills, J. W. Bryan and E. D. Hondros, Can. Met. Q., 21(4), 393(1982) https://doi.org/10.1179/cmq.1982.21.4.393
- A. Kasama, A. McLean, W. A. Miller, Z. Morita, M. J. Ward, Can. Met. Q., 22(1), 9(1983) https://doi.org/10.1179/cmq.1983.22.1.9
- K. Ogino, H. Taimatsu, J. Jpn. Inst. Metals, 43(10), 871(1979) https://doi.org/10.2320/jinstmet1952.43.9_871
- H. Taimatsu, K. Ogino and F. Nakatani, J. Jpn. Inst. Metals, 50(2), 176(1986) https://doi.org/10.2320/jinstmet1952.50.2_176
- D. H. Bradhurst, A. S. Buchanan, J. Phys. Chem, 63, 1486(1959) https://doi.org/10.1021/j150579a039
- Z. Niu, K. Mukai, Y. Shiraishi, T. Hibiya, K. Kakimoto and M. Koyama, J. Jpn. Assoc. Crystal. Growth, 24(4), 369(1997)
- K. Mukai, Z. Yuan, Mater. Trans. JIM, 41(2), 331(2000) https://doi.org/10.2320/matertrans1989.41.331
- A. Passerone, R. Sangiorgi and G. Caracciolo, J. Chem. Thermodynamics, 15(10), 971(1983) https://doi.org/10.1016/0021-9614(83)90131-3
- H. Taimatsu, R. Sangiorgi, Surf. Sci., 261(1-3), 375(1992) https://doi.org/10.1016/0039-6028(92)90248-5
- Z. Yuan, K. Mukai, K. Takagi and M. Ohtaka, J. Jpn. Inst. Metals, 65(1), 21(2001) https://doi.org/10.2320/jinstmet1952.65.1_21
- V. Ghetta, J. Fouletier and D. Chatain, Acta Mater., 44(5), 1927(1996) https://doi.org/10.1016/1359-6454(95)00312-6
- C. H. P. Lupis, Chemical Thermodynamics of Materials, p. 433, North-Holland, New York, (1983)
- J. Lee, T. Tanaka, M. Yamamoto and S. Hara, Mater. Trans., 45(3), 625(2004) https://doi.org/10.2320/matertrans.45.625
- J. Lee, T. Tanaka, Y. Asano and S. Hara, Mater. Trans., 45(8), 2719(2004) https://doi.org/10.2320/matertrans.45.2719
- K. S. Yeum, R. Speiser and D. R. Poirier, Metall. Trans. B, 20B(5), 693(1989) https://doi.org/10.1007/BF02655927
- T. Tanaka, S. Hara, Steel Res., 72(11+12), 439(2001) https://doi.org/10.1002/srin.200100149
- J. Lee, K. Morita, Scan. J. Metall., 34(2), 131(2005) https://doi.org/10.1111/j.1600-0692.2005.00725.x
- J.A. Butler, Proc. Roy. Soc. A, 135, 348(1932) https://doi.org/10.1098/rspa.1932.0040
- T. Tanaka, S. Hara, M. Ogawa and T. Ueda, Z. Metallkd., 89(5), 368(1998)
- E. T. Turkdogan, Physical Chemistry of High Temperature Technology, p. 5-21, Academic Press, New York, (1980)
- T. Tanaka, M. Nakamoto, R. Oguni, J. Lee and S. Hara, Z. Metallkd., 95(9), 818(2004) https://doi.org/10.3139/146.018027