Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Statistical Estimation of Modal Characteristics of a Structural System Based on Design Variable Samples

설계변수 표본에 근거한 구조시스템 모달 특성의 통계적 예측

  • 김용우 (한양대학교 대학원 기계공학과) ;
  • 유홍희 (한양대학교 기계공학부)
  • Published : 2009.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

The design methods of mechanical systems are largely classified into deterministic methods and stochastic methods. In deterministic methods, design parameters are assumed to have fixed values. On the other hand, in stochastic methods, design parameters are assumed to be statistically distributed. When a stochastic method is employed, statistical characteristics of the populations of design variables are assumed to be known. However, very often, it is almost impossible or very expensive to obtain the statistical characteristics of the populations. Therefore a sample survey method is usually employed for stochastic methods. This paper describes the procedure of estimating the statistical characteristics of populations by employing sample data sets. An example of AFM micro cantilever beam is employed to show the effectiveness of the procedure.

Keywords

References

  1. Hartenberg, R. S. and Denavit, J., 1964, Kinematic Synthesis of Linkages, McGraw-Hill, New York
  2. Garret, R. E. and Hall, A. S., 1969, 'Effect of Tolerance and Clearance in Linkage Design,' ASME Journal of Engineering for Industry, Vol. 91, pp. 198-202 https://doi.org/10.1115/1.3591516
  3. Lee, S. J. and Gilmore, B. J., 1991, 'The Determination of the Probabilistic Properties of Velocities and Accelerations in Kinematic Chains with Uncertainty,' ASME Journal of Mechanical Design, Vol. 113, pp. 84-90 https://doi.org/10.1115/1.2912755
  4. Choi, D. H., 2005, 'Statistical Tolerance Analysis and Modal Analysis of Multibody Systems,' Hanyang University, Ph. D. Thesis
  5. Ronald E. Walpole, Raymond H. Myers, Sharon L Myers, Keying Ye, 2002, Probability & Statistics for Engineers & Scientists, Prentice-Hall, Inc., New Jersey, pp. 230-265
  6. Binning, G. and Quate, C. F., 1986, 'Atomic Force Microscopy,' Phys. Rev. Lett., Vol. 96, No. 9, pp. 930-933 https://doi.org/10.1103/PhysRevLett.56.930
  7. Park, J. K., Kwon, H. K. and Hong, S. W., 2004, 'Vibration Characteristics and Performance of Cantilever for Non-contact Atomic Force Microscopy,' Transaction of the Korean Society for Noise and Vibration Engineering, Vol. 14, No.6, pp. 495-502 https://doi.org/10.5050/KSNVN.2004.14.6.495
  8. Sarid, D., 1997, Exploring Scanning Probe Microscopy, John Willy and Sons, Inc., New York, pp. 7-99