References
- Bicen A. F., Valfidis C. and Whitelaw J. H., 1984, "Steady and Unsteady Airflow through the Intake Valve of a Reciprocating Engine", ASME Winter Annual Meeting, Flows in Internal Combustion Engines-II, FED-vol. 20
- Kastner L. S., Williams T. J. and White J. B., 1963, "Poppet Inlet Valve Characteristics and Their Influence on the Induction Process", Proc. of I .Mech. E., Vol 178, No 36, pp 955-978 https://doi.org/10.1177/0020348363178001137
- Ohm Inyong and Cho Yongsuk, 2001, "In-Cylinder Fuel Behavior according to Fuel Injection Timing and Port Characteristics in an SI Engine : Part I-Without Swirl”, Transaction of KSAE, Vol 9, No. 2, pp. 19-27
- Ohm Inyong and Cho Yongsuk, 2001, "In-Cylinder Fuel Behavior according to Fuel Injection Timing and Port Characteristics in an SI Engine : Part II-With Low/Medium Swirl”, Transaction of KSAE, Vol 9, No. 3, pp. 9-17
- Heywood J. B., 1988, "Internal Combusrion Engine Fundamentals", pp345, MacGraw-Hill, New York
- Ohm Inyong and Cho Yongsuk, 2000, "Mechanism of Axial Stratification and its Effect in an SI Engine", SAE2000-01-2843, 2000 SAE Transaction - Journal of Fuel & Lubricants
- Ohm Inyong and Park Chanjun, 2006, "In-Cylinder Intake Flow Characteristics according to Inlet Valve Angle" Transaction of KSAE, Vol 14, No. 3, pp. 142-149
- Ohm Inyong and Park Chanjun, 2006, "In-Cylinder Compression Flow Characteristics according to Inlet Valve Angle" Transaction of KSAE, Vol 14, No. 4, pp. 77-83
- Ohm Inyong and Park Chanjun, 2002, "Experimental study on axial stratification process and its effects (1)", Journal of Mechanical Science and Technology, Vol. 16, No. 11, pp 1457-1469
- Ohm Inyong, Park Chanjun, Woo Sungdong and Jang Yeolsung, 2005, “Characteristics of Swirl Generation According to Inlet Valve Angle", 2005 Spring Conference Proceedings of KSAE, Vol. 1, pp.191-198
Cited by
- Effects of intake valve angle on combustion characteristic in an SI engine vol.14, pp.4, 2013, https://doi.org/10.1007/s12239-013-0057-4