Journal of the Korea Institute of Military Science and Technology (한국군사과학기술학회지)

The Korea Institute of Military Science and Technology (한국군사과학기술학회)
권호 표지

A Study on the Design Analysis and Test of a Ballute Type Parachute of the Smart Submunition

지능형 자탄의 벌루트형 낙하산 설계 해석 및 시험에 관한 연구

  • Published : 2008.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

The configuration model of a ballute type RAID(Ram Air Inflated Decelerator) for reducing the high speed and high revolution of smart submuntion is designed and tested. Three dimensional incompressible turbulent flow computational fluid dynamic analysis for the assembly of ballute and submunition is performed and pressure distribution, velocity, and drag around the assembly is calculated. Aerodynamic characteristics of the ballute assembly such as air flow inside and outside of the ballute and pressure distribution is clearly shown and it's drag coefficient is computed. Trajectory analysis of the submunition is performed and is in good agreement with the descending trajectory data of experimental model tested.

Keywords

References

  1. 이상길, 최서원, "차세대 지능포탄 핵심기반기술 도출/획득대안 연구", ADD 연구보고서, 1999
  2. K-F. Doherr, D. Münscher and C. Saliaris, "Teuer und Stabilisierungsmechanismen von Submunition", Internal Report IB 111-86/9, DFVLR Institut für Flugmechanik, Braunschweig
  3. 강준구, 이상길, "회전 안정탄의 6자유도 운동해 석에 관한 연구", 육사논문집 제52집, pp. 475-496, 1997
  4. Patankar, S. V., Spalding, D. B., "A Calculation Procedure for Heat, Mass and Momentum Transfer in Three-Dimensional Parabolic Flows", International Journal of Heat and Mass Transfer, Vol. 15, pp. 1787-1806, 1972 https://doi.org/10.1016/0017-9310(72)90054-3
  5. Pratap, V. S, Spalding, D. B., "Numerical Computations of the Flow in Caused Ducts", Aeronautical Quarterly., Vol. 26, pp. 219-228, Aug. 1975 https://doi.org/10.1017/S0001925900007368
  6. H. K. Myong and N. Kasagi, "Application of an Anisotropic k-e Model to the Fully- Developed Channel Flows", Proc. 2nd Symp. on Numerical Fluid Dynamics, Tokyo, pp. 421-424, 1988
  7. H. K. Myong and N. Kasagi, "Toward an Anisotropic k-e Turbulence Model Taking into Account the Wall-Limiting Behavior of Turbulence", Proc. Int. Symp. on Computational Fluid Dynamics-NAGOYA, Nagoya, Japan, pp. 269-274, 1989
  8. H. K. Myong, N. Kasagi and T. Kobayashi, "A New k-e Turbulence Model and its Application", (in Japanese), 38th Japan National Congress for Applied Mechanics, Tokyo, pp. 241-244, Dec., 1989
  9. T. Kobayashi, M. Ohmachi and H. K. Myong, "Numerical Simulation of the Flow Past a Backward-Facing Step Using an Anisotropic k-e Model"(in Japanese), Proc. 3rd Symp. on Numerical Fluid Dynamics, Tokyo, pp. 343-346, 1989
  10. H. K. Myong, "Prediction of Turbulence- Driven Secondary Flow in a Square Duct With an Anisotropic Low-Reynolds-Number k-e Model", Eighth Symp. on Turbulent Shear Flows, Munich, Germany, Vol. 2, pp. III-10-1-III-10-2, September 9-11, 1991
  11. H. K. Myong, and T. Kobayashi, "Numerical Simulation of Three-Dimensional Developing Turbulent Flows in a Square Duct with the Anisotropic Model", FED-Vol. 117, Advances in Numerical Simulation of Turbulent Flows, ASME, pp. 17-23, 1991
  12. T. S. Park, N. Hur and H. J. Sung, "A Numerical Study on Fully Developed Turbulent Secondary Flows in an Equilateral Triangular Duct by an Anisotropy k-e Model", International Symposium on Turbulence, Heat & Mass Transfer, Lisbon, Portugal, pp. 1-6, August 9-12, 1994
  13. H. J. Sung, H. C. Jang and C. H. Cho, "Curvature Dependent 2-Equation Model for Recirculating Flows", International Symposium of the Engineering Turbulence Modeling and Measurements, Dubrovnik, Yugoslavia, pp. 33-42, September 24-28, 1990
  14. G. H. Rhee, S. S. Lee and H. J. Sung, "Numerical Analysis of Backward-Facing Step Flow", The 3rd Workshop of CFD Depart. of KSME, Seoul, Korea, pp. 51-60, March, 1995
  15. C. S. Kim, C. Kim and O. H. Rho, "Sensitivity Analysis for the Navier-Stokes Eqautions with Two-Equation Turbulence Models", AIAA Journal accepted for publication in 2000