References
- Ikawa, N., 1991, "Ultraprecision Metal Cutting The Past, the Present and Future," Annals of the CIRP, Vol. 40, No. 2, pp. 587-594 https://doi.org/10.1016/S0007-8506(07)61134-2
- Seong, C. H., Han, B. S., Kim, H. C., Kim, K. S., and Namgung, S., 1997, "A Study on the Turning System for Ultra-precision Machining," Trans. of the KIIE, Vol. 22, No. 2, pp. 116-124
- Warren J. Smith, 2001, Modern Optical Engineering, 3rd, McGraw-Hill, New York
- Rim, C. S., and Jo, J. H., 2001, "Design and Evaluation for the Ultra-Compact Camera Lens," J. Sci. Res. Inst. Han Nam Univ., Vol. 31, pp. 85-97
- William, M., Elaine, C., Russell, F., and Peter, S., "Practical Ray Tracing of Trimmed NURBS Surface," Computer Science Department, 1999
- Park, J. S., Kim, D. S., Lee, J. S., Jung, Y. H., Jun, C. S., Lee, T. K., Lee, H. G., and Ryee, K. T., 2001, "Development of a Dedicated CAD/CAM System for Aspheric Lens (II) : Module for Surface Fairing and CAM," Proceeding of KORMA & KIIE spring conference, pp. 473-476
- Parkinson, D. B. and Moreton, D. N., 1991, "Optimal biarc-curve fitting," Computer Aided Design, Vol. 23, No. 6, pp. 411-419 https://doi.org/10.1016/0010-4485(91)90009-L
- Kang, S. D., Kim, W. S., Jang, K. H., and Kim, D. H., 2004, "A Study on the Compensation of Ultraprecision Aspheric Lens Mold," Proceeding of KSPE spring conference, pp. 237-238
- Kang, S. D., 2005, "A Study on the Aspheric Design and Ultra-precision Compensation Machining of Optical Pick-up Mold Core," Master Dissertation, Wonkwang Univ., Republic of KOREA
- Park, Y. C., Yang, S. C., Kim, G. H., and Lee, Y. H., 2005, "The Performance Improvement of The Aspheric Form Accuracy by Compensation Machining Program," Journal of KSMPE, Vol. 4, No. 2, pp. 10-15
- Lee, S. J. and Hyun, D. H., 2007, "A Study on Influence of Parameter and Characteristics in the Injection Process on the Birefringence and Refractive Index for Pickup lens," Trans. of KSMTE, Vol. 16, No. 6, pp. 21-28
- Eugene, H., 2002, Optics, Addison Wesley, New York
- Woo, S. H. and Lee, D. J., 2007, "A Study on Key Parameters and Characteristics in the Manufacturing Process of the Dual Pickup Objective Lens," Trans. of KSMTE, Vol. 16, No. 3, pp. 117-124