참고문헌
- Lim H.C., Castro I.P. and Hoxey R.P., 2007, "Bluff Bodies in Deep Turbulent Boundary Layers: Reynoldsnumber Issues," J. Fluid Mech., Vol.571, pp.97-118 https://doi.org/10.1017/S0022112006003223
- Lim H.C., 2006, "Separated Flow Structure from a Cube placed in a Turbulent Boundary Layer," KSME fall conference, pp.16-21
- Lim H.C., 2007, "Generation of a Turbulent Boundary Layer Using LES," Trans of the KSME (B), Vol. 31, No. 8, pp.680-687 https://doi.org/10.3795/KSME-B.2007.31.8.680
- Yaghoubi M., and Mahmoodi S., 2004, "Experim ental Study of Turbulent Separated and Reattached Flow over a Finite Blunt Plate," Experimental Thermal and Fluid Science, Vol.29, pp. 105-112 https://doi.org/10.1016/j.expthermflusci.2004.02.003
- Nitin S., and Chhabra R.P., 2005, "Non-isothermal Flow of a Power Law Fluid past a Rectangular Obstacle (of aspect ratio 1x2) in a Channel: Drag and Heat Transfer," Int'l J. Eng. Sci., Vol.43, pp. 707-720 https://doi.org/10.1016/j.ijengsci.2004.12.015
- Ji H.S., Kim K.C., Choo J.M., Rhi S.H., Seong S.H., 2002, "Flow Structure Around a Rectangular Prism Placed in a Thick Turbulent Boundary Layer," Trans of the KSME (B), Vol. 26, No. 6, pp.578-586 https://doi.org/10.3795/KSME-B.2002.26.4.578
- Ji H.S., Kim K.C., Lee S.H., Boo J.S., 2001, "Effect of Boundary Layer Thickness on the Flow Around a Rectangular Prism," Trans of the KSME (B), Vol. 26, No. 6, pp.893-901
- Cook N.J., 1973, "On Simulating the Lower Third of the Urban Adiabatic Boundary Layer in a Wind Tunnel," Atmos. Environ, Vol. 7, pp. 691 https://doi.org/10.1016/0004-6981(73)90151-0
- Cook N.J., 1978, "Wind tunnel simulation of the Adiabatic Atmospheric Boundary Layer by Roughness, Barrier and Mixing Device Methods," J. Wind Eng. Ind. Aero., Vol. 3, pp. 157-176 https://doi.org/10.1016/0167-6105(78)90007-7
- Richards P.J., Hoxey R.P. and Short L.J., 2001, "Wind Pressure on a 6m Cube," J. Wind Eng. Ind. Aero., Vol.89, pp.1553-1564 https://doi.org/10.1016/S0167-6105(01)00139-8
- Castro I.P. and Robins A.G., 1977, "The Flow around a Surface Mounted Cube in Uniform and Turbulent Streams," J. Fluid Mech., Vol.79, pp.307-335 https://doi.org/10.1017/S0022112077000172
- Businger J.A., Wyngaard J.C., Izumi Y. and Bradley E.F., 1971, "Flux-Profile Relations in the Atmosph eric Surface Layer," J. Atmos. Sci., Vol.28, pp.181-189 https://doi.org/10.1175/1520-0469(1971)028<0181:FPRITA>2.0.CO;2
- Lim H.C., 2007, "Flow Structure on the Roof of a Cube Place in a Turbulent Boundary Layer," J. Wind Engineering Institute of Korea, Vol.11, No.2, pp. 153-159
- Wieringa J., 1992, "Updating the Davenport Roughness Classification," J. Wind Eng. Ind. Aero., Vol. 41-44, pp.357-368 https://doi.org/10.1016/0167-6105(92)90434-C
- Allen H. J. and Vincenti W. G., 1944, "Wall Interference in a Two-Dimensional Flow and Wind Tunnel with Consideration of the Effect of Compressibility," National Advisory Committee for Aeronautics, Rept. 782, Washington, DC
피인용 문헌
- Interference effects of three consecutive wall-mounted cubes placed in deep turbulent boundary layer vol.756, pp.1469-7645, 2014, https://doi.org/10.1017/jfm.2014.454
- Numerical Study on Turbulent Flow Inside a Channel with an Extended Chamber vol.34, pp.10, 2010, https://doi.org/10.3795/KSME-B.2010.34.10.925