Journal of the Korean Institute of Illuminating and Electrical Installation Engineers (조명전기설비학회논문지)

The Korean Institute of IIIuminating and Electrical Installation Engineers (한국조명전기설비학회)
권호 표지
DOI QR코드

DOI QR Code

The Discontinuous Conduction Mode(DCM) Modeling of DC/DC Converter and Critical Characteristic using Average Model of Switch

스위치 평균 모델을 이용한 DC/DC 컨버터의 전류불연속모드 모델링과 임계특성에 관한 연구

  • Published : 2008.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

The state-space average model is extended to buck-boost, and buck-boost topology switching mode DC/DC converters and modified to have higher precision without increment of computation. The modified model is used in continuous conduction mode(CCM) switching DC/DC converters and some significant conclusions are derived. This paper discusses the discontinuous conduction mode(DCM) modeling of DC/DC converter and critical characteristic using average model of switch. Average model of switch approach is expended to the modeling of boundary conduction mode DC/DC converters that operate at the boundary between continuous conduction mode(CCM) and discontinuous conduction mode(DCM). Frequency responses predicted by the average model of switch are verified by simulation and experiment. A prototype featuring 15[V] input voltage, 24[V] output voltage, and 24[W] output power using MOSFET.

상태 공간 평균화 모델은 강압형, 승압형 및 승 강압형 DC/DC 컨버터에 적용이 가능하며, 특별한 계산이 필요 없는 높은 정밀도가 증명된 모델이다. 이러한 모델은 전류연속모드(CCM) DC/DC 컨버터에서 확립되었으며, 본 논문에서는 컨버터의 전류연속모드(CCM) 모델로부터 의미 있는 결론을 유도하고자 한다. 본 논문에서는 스위치 평균모델을 이용한 DC/ DC 컨버터의 전류불연속모드(DCM) 모델링 및 임계특성에 관하여 논하였다. 스위치 평균 모델은 전류연속모드(CCM)와 전류불연속모드(DCM) 사이의 DC/DC 컨버터의 경계 조건에 대한 모델로부터 유추할 수 있으며, 시뮬레이션과 실험에 의해서 스위치의 평균 모델의 주파수 응답 특성을 예측할 수 있었다. 본 연구에서는 MOSFET를 사용하여 입력전압 15[V], 출력전압 24[V], 출력전력 24[W]급 시스템을 제작하여 실험하였다.

Keywords

References

  1. R.B. Ridley, "A New Continuous Time Model for Current Mode Control," IEEE Transactions on Power Electronics, Vol. 6, No. 2, pp. 271-280, Apr. 1991 https://doi.org/10.1109/63.76813
  2. F.D. Tan, and R.D. Middlebrook, "A unified model for current-programmed converters," IEEE Trans. Power Electron., Vol. 10, No. 4, pp. 397-407, July 1995 https://doi.org/10.1109/63.391937
  3. Byungcho Choi, "Step Load Response of a Current Mode Controlled DC to DC Converter," IEEE Transactions on Aerospace and Electronics Systems, Vol. 33, No. 4, Oct. 1997
  4. Robert W. Erickson, Slobodan Cuk and R.D. Middlebrook, "Large signal modeling and analysis of switching converters." Power Electronics Specialists Conf., pp. 240-250, 1982
  5. R. Ridley, B.H. Cho, and F.C. Lee, "Analysis and Interpretation of Loop Gains of Multiloop-controlled Switching Regulators," IEEE Transactions on Power Electronics, Vol. 3, No. 4, pp. 489-498, 1998 https://doi.org/10.1109/63.17971
  6. S. Singer, and R.W. Erickson, "Power-source element and its properties," Proceeding of IEE'94, pp. 220-26, June 1994
  7. R.W. Erickson, "Advances in Averaged Switch Modeling," Fourth Brazilian Congress of Power Electronics (COBEP'97), Dec. 1997
  8. K.K. Sum, "Switch Mode Power Conversion Basic Theory and Design," New York and Basel publication, pp. 209-227. 1984
  9. A.S. Kislovski, "Dynamic Analysis of Switching-Mode DC/DC Converter," Van Nostrand Reinhold publication. pp. 20-59. 1991