초록
본 논문은 중복 다치논리(redundant multi-valued logic)를 이용하여 초고속 디멀티플렉서(demultiplexer)를 CMOS 회로로 설계하였다. 설계한 회로는 중복 다치논리를 이용하여 직렬 이진 데이터를 병렬 다치 데이터로 변환하고 이를 다시 병렬 이진 데이터로 변환한다. 중복 다치논리는 중복된 다치 데이터 변환으로써 기존 방식 보다 더 높은 동작속도를 얻을 수 있다. 구현한 디멀티플렉서는 8개의 적분기로 구성되어 있으며, 각 적분기는 누적기, 비교기, 디코더, D 플립플롭으로 구성된다. 설계한 회로는 0.18um 표준 CMOS 공정으로 구현하였으며 HSPICE 시뮬레이션을 통해 검증하였다. 본 논문의 디멀티플렉서의 최대 데이터 전송률은 20 Gb/s이고 평균 전력소모는 58.5 mW이다.
This paper describes a high-speed CMOS demultiplexer using redundant multi-valued logic (RMVL). The proposed circuit receives serial binary data and is converted to parallel redundant multi-valued data using RMVL. The converted data are reconverted to parallel binary data. By the redundant multi-valued data conversion, the RMVL makes it possible to achieve higher operating speeds than that of a conventional binary logic. The implemented demultiplexer consists of eight integrators. Each integrator is composed of an accumulator, a window comparator, a decoder and a D flip flop. The demultiplexer is designed with TSMC $0.18{\mu}m$ standard CMOS process. The validity and effectiveness are verified through the HSPICE simulation. The demultiplexer is achieved the maximum data rate of 20 Gb/s and the average power consumption of 95.85 mW.