DOI QR코드

DOI QR Code

Dislocation dynamics simulation on stability of high dense dislocation structure interacting with coarsening defects

  • Yamada, M. (Graduate School of Engineering, Kobe University) ;
  • Hasebe, T. (Graduate School of Engineering, Kobe University) ;
  • Tomita, Y. (Graduate School of Engineering, Kobe University) ;
  • Onizawa, T. (Japan Atomic Energy Agency, Core and Structural Group, Advanced Nuclear System Research and Development Directorate)
  • 투고 : 2008.03.25
  • 심사 : 2008.11.24
  • 발행 : 2008.12.25

초록

This paper examined the stability of high-dense dislocation substructures (HDDSs) associated with martensite laths in High Cr steels supposed to be used for FBR, based on a series of dislocation dynamics (DD) simulations. The DD simulations considered interactions of dislocations with impurity atoms and precipitates which substantially stabilize the structure. For simulating the dissociation processes, a point defect model is developed and implemented into a discrete DD code. Wall structure composed of high dense dislocations with and without small precipitates were artificially constructed in a simulation cell, and the stability/instability conditions of the walls were systematically investigated in the light of experimentally observed coarsening behavior of the precipitates, i.e., stress dependency of the coarsening rate and the effect of external stress. The effect of stress-dependent coarsening of the precipitates together with application of external stress on the subsequent behavior of initially stabilized dislocation structures was examined.

키워드

참고문헌

  1. Ghoniem, N. M. and Sun, L. Z. (1999), "Fast-sum method for the elastic field of three-dimensional dislocation ensembles", Phys. Rev., B60, 128-140.
  2. Ghoniem, N. M., Tong, S. -H. and Sun, L. Z. (1999), "Parametric dislocation dynamics: A thermodynamicsbased approach to investigations of mesoscopic plastic deformation", Phys. Rev., B61, 913-927.
  3. Hasebe, T. (2004a), "Field theoretical multiscale polycrystal plasticity", Trans. MRS-J, 29, 3619-3624.
  4. Hasebe, T. (2004b), "Continuum description of inhomogeneously deforming polycrystalline aggregate based on field theory", in H. Kitagawa, Y. Shibutani eds. Mesoscopic Dynamics of Fracture Process and Materials Strength, IUTAM Symp., 381-390, Kluwer.
  5. Hasebe, T. (2006), "Multiscale crystal plasticity modeling based on field theory", CMES, 11-3, 145-155.
  6. Hirth, J. P. and Lothe, J. (1992), Theory of Dislocations, Krieger Publishing Company.
  7. Kato, M. (1999), Introduction to the Theory of Dislocations, Shokabo, Japan.
  8. Kimura, K., Kushima, H. and Abe, F. (2003), "Improvement of creep life prediction of high Cr ferritic creep resistant steels by region partitioning method of stress vs. time to rupture diagram", J. Soc. Maters. Sci. Japan, 52-1, 57-62. https://doi.org/10.2472/jsms.52.57
  9. Kubin, L. P., Canova, G., Condat, G., Devincre, B., Pontikis, V. and Brechet, Y. (1992), "Dislocation microstructures and plastic flow: 3D simulation", Solid State Phenomena, 23 & 24, 455-472.
  10. Kushima, H, Kimura, K. and Abe, F. (1999), "Degradation of Mod.9Cr-1Mo steel during long-term creep deformation", Tetsu-to-Hagane, 85-11, 841-847.
  11. Maruyama, K., Sawada, K. and Koike, J. (2001), "Strengthening mechanisms of creep resistant tempered Martensitic Steel", ISIJ International, 6, 641-653.
  12. Taneike, M, Kondo, M. and Morimoto, T. (2001), "Accelerated coarsening of MX carbonitrides in 12%Cr steels during creep deformation", ISIJ International, 41, Supplement, S111-S115. https://doi.org/10.2355/isijinternational.41.Suppl_S111
  13. Zbib, H. M., Rhee, M. and Hirth, J. P. (1998), "On plastic deformation and the dynamics of 3D dislocations", Int. J. Mech. Sci., 40, 113-127. https://doi.org/10.1016/S0020-7403(97)00043-X
  14. Zbib, H. M. (2002), Multiscale Dislocation Dynamics Plasticity For FCC and BCC Single Crystals Version 02.

피인용 문헌

  1. Interaction fields based on incompatibility tensor in field theory of plasticity-Part II: Application- vol.2, pp.1, 2008, https://doi.org/10.12989/imm.2009.2.1.015