한국건축시공학회지 (Journal of the Korea Institute of Building Construction)

  • 제8권2호
  • /
  • Pages.113-119
  • /
  • 2008
  • /
  • 1598-2033(pISSN)
  • /
  • 2233-5706(eISSN)
한국건축시공학회 (The Korean Institute of Building Construction)
권호 표지
DOI QR코드

DOI QR Code

연속섬유 시트로 보강된 RC 부재의 모서리 형상에 따른 보강 효율에 관한 연구

Strengthening Efficiency for the Various Corner Shapes of RC Member confined with Continuous Fiber Sheets

  • 발행 : 2008.04.25
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Recently, fiber reinforced polymers(FRP) composite materials are used extensively in the rehabilitation of concrete structural members. A main application is to wrap beams and columns using the continuous fibers sheets to improve their strength and ductility. The corner chamfering affects significantly the performance of the continuous fibers sheets, and could lead to environmental problem with waste and dust. The main purpose of this paper is to verify the effect of corner conditions on the strength of the continuous fiber sheets, and to introduce new attached components which can avoid environmental problem. A total of 15 specimens were tested and carefully checked for three types of continuous fiber sheets(carbon, glass, and aramid) and three types of corner conditions(non-chamfering, chamfering, and device attaching). It is proved that the devices proposed in this research have some capabilities to use for RC member. But additional research will be needed for commercializing.

키워드

참고문헌

  1. 양동석, 고병순, 박선규, 유영찬, 콘크리트와 탄소섬유판 계면의 본드-슬립모델 산정, 한국 콘크리트학회 가을 학술발표회 논문집,Vol.16, No.2, pp.635-638, 2004
  2. 정명채, 박종원, FRP部材의 부착거동 특성 및 부착모델, 대한건축학회논문집 구조계, Vol.19, No.12, pp.105-112, 2003
  3. Brosens, K. and Van Gemert, D., Anchoring Stresses between Concrete and Carbon Fiber Reinforced Laminates Non-Metallic (FRP) Reinforcement for Concrete Structures, V.1, Japan Concrete Institute, Japan, 271-278, 1997
  4. Brosens, K. and Van Gemert, D., Anchorage Design for Externally Bonded Carbon Fiber-Reinforced Polymer Laminates. Proceedings of the FRPRCS-4, SP-188, ACI, pp. 635-645, 1999
  5. Izumo, K., Asamizu, T., Saeki, N. and Shimura, K. Bond Behavior of Aramid and Carbon Fiber Sheet, Concrete Research and Technology, JCI, Vol.9, No.2, pp.1-7(in Japanese), 1998
  6. JCI (Japan Concrete Institute), Technical Report on Continuous Fiber-Reinforced Concrete. Japan Concrete Institute, TC952, pp. 116-124, 1998
  7. J. F. Chen and J. G. Teng, Anchorage Strength Models for FRP and Steel Plates Bonded to Concrete, Journal of Structural Engineering, Vol. 127, No.7, pp. 784-791, 2001 https://doi.org/10.1061/(ASCE)0733-9445(2001)127:7(784)
  8. JSCE (Japan Society for Civil Engineers), Recommendations for Upgrading of Concrete Structures with Use of Continuous Fiber Sheets. pp. 116-133, 2001
  9. Nakaba, K., Kanakubo, T., Furuta, T., and Yoshizawa, H., Bond Behavior between Fiber-Reinforced Polymer Fibers and Concrete. ACI Struct. J., pp. 359-367, 2001
  10. Nanni, A., Carbon Fibers in Civil Structures: Rehabilitation and New Construction, Proc., the Global Outlook for Carbon Fiber 2000, Intertech, San Antonio, TX, 2000
  11. Maeda, T., Asano, Y., Sato, Y., Ueda, T., and Kakuta, Y., A Study on Bond Mechanism of Carbon Fiber Sheet. Proceedings of Third International Symposium of Non-Metallic (FRP) Reinforcement for Concrete Structures, V.1, pp. 279-286, 1997
  12. MBrace TM, Composite Strengthening System, Engineering Design Guideline, 2nd Ed., Master Builders Technologies, Inc., Cleveland, OH. 1998
  13. Priestley, M.J. N., Seible, F., and Calvi, M., Seismic Design and Retrofit of Bridges, John Wiley and Sons, Inc., New York, pp. 672, 1995
  14. Sato, Y. and Vecchio, F. J., Tension Stiffening and Crack Formation in Reinforced Concrete Members with Fiber-Reinforced Polymer Sheets. ASCE J. Struct. Engrg., 129(6), 717-724, 2003 https://doi.org/10.1061/(ASCE)0733-9445(2003)129:6(717)
  15. Ueda, T., Sato, Y., and Asano, Y., Experimental Study on Bond Strength of Continuous Carbon Fiber Sheets. Proceedings of the FRPRCS-4, SP-188, ACI, pp. 407-416, 1999
  16. Xiao, Y. and Wu, H., Compressive Behavior of Concrete Confined by Carbon Fiber Composite Jackets, J. Mat. Civil Engrg, ASCE, 12(2), pp. 139-146, 2000 https://doi.org/10.1061/(ASCE)0899-1561(2000)12:2(139)
  17. Yang, X., A. Nanni, and G. Chen, Effect of Corner Radius on the Performance of Externally Bonded FRP Reinforcement, Non-Metallic Reinforcement for Concrete Structures-FRPRCS-5, Cambridge, July 16-18, pp. 197-204 , 2001
  18. Yang, X., Nanni, A., Haug, S., and Sun, C. L. Strength and Modulus Degradation of CFRP Laminates from Fiber Misalignment, J. Mat. Civil Engrg, ASCE, 14(4), pp. 320-326, 2002 https://doi.org/10.1061/(ASCE)0899-1561(2002)14:4(320)