Abstract
In this paper proposed the solar tracking system to use a fuzzy based on PC in of order to increase an output of the PV(Photovoltaic) array. The solar tracking system operated two DC motors driving by signal of photo sensor. The control of dual axes is not an easy task due to nonlinear dynamics and unavailability of the parameters. Recently, artificial intelligent control of the fuzzy control, neural-network and genetic algorithm etc. have been studies. The fuzzy control made a nonlinear dynamics to well perform and had a robust and highly efficient characteristic about a parameter variable as well as a nonlinear characteristic. Hence the fuzzy control was used to perform the tracking system after comparing with error values of setting-up, nonlinear altitude and azimuth. In this paper designed a fuzzy controller for improving output of PV array and evaluated comparison with efficient of conventional PI controller. The data which were obtained by experiment were able to show a validity of the proposed controller.
본 논문은 PV(Photovoltaic) 어레이의 출력을 높이기 위해 PC 기반의 퍼지제어를 이용한 태양추적 시스템을 제안한다. 태양 추적시스템은 광센서의 신호에 의해 구동하는 두 개의 DC 모터로 동작한다. 두 축의 제어는 파라미터의 불확실성 및 비선형 특성 때문에 쉽지 않다. 최근 퍼지제어, 신경회로망 및 유전자 알고리즘 등의 인공지능 제어에 대한 연구가 많이 이루어지고 있다. 그 중 퍼지제어는 비선형 제어를 원활하게 수행할 수 있으며 파라미터 변동 및 비선형 특성에 대한 강인성 및 고성능의 특징을 가지고 있다. 따라서 퍼지제어는 설정된 오차 값과 비선형의 고도각 및 방위각 오차 값을 비교하여 추적 시스템 구동을 위해 사용된다. 본 논문에서는 PV 어레이의 출력 향상을 위해 퍼지제어기를 설계하고 종래의 Pl 제어기와 성능을 비교하며 평가한다. 실험을 통한 데이터는 제시한 제어기의 타당성을 입증한다.