A High Efficiency Reconfigurable Doherty Amplifier

고효율의 재구성된 도허티 증폭기

  • Kim, Ell-Kou (Radio Communication Eng., Kumoh National Institute of Technology) ;
  • Kim, Young (Radio Communication Eng., Kumoh National Institute of Technology) ;
  • Yoon, Young-Chul (Electronics and Information Communication Eng., Kwandong University)
  • 김일규 (금오공과대학교 전파통신과 RF회로설계연구실) ;
  • 김영 (금오공과대학교 전파통신과 RF회로설계연구실) ;
  • 윤영철 (관동대학교 전자정보통신공학부)
  • Received : 2008.05.07
  • Published : 2008.06.30

Abstract

This paper proposes the Reconfigurable Doherty Amplifier(RDA) with asymmetric structure which has ${\lambda}/4$ impedance transformer for modulating the load impedance in peaking amplifier path. This structure is possible to implement a compact size for N-stage multi Doherty amplifier and to get almost same characteristics that is compared to conventional Doherty amplifier. To realize the high efficiency amplifier, we were implemented 45 Watts power amplifier at transmitter band of Wideband Code Division Multiple Access(WCDMA) base-station. As a result, in case of WCDMA 1 Frequency Allocation(FA) input signals, this amplifier has obtained a 26.3% Power Added Efficiency(PAE) at 8 dB back-off point from P1dB and an Adjacent Channel Leakage Power(ACLR) is -40.4 dBc at center frequency ${\pm}5MHz$ deviation.

본 논문에서는 ${\lambda}/4$ 임피던스 변환기를 피킹 증폭기 뒷단에 배치하고, 주 증폭기와 피킹 증폭기가 서로 다른 비대칭 구조의 도허티 증폭기 만들어 효율을 개선시키는 방법을 제시하였다. 이러한 구조는 다단 도허티 증폭기 구현 시 작은 크기로 구현이 가능하며, 기존의 전기적 특성과 동일함을 시뮬레이션을 통해서 확인하였다. 이러한 구조를 갖는 전력 증폭기를 제작하였으며, W-CDMA 기지국 송신 대역에서 IFA 신호를 인가하였을 때, 45W 출력 기준으로 8dB 백-오프 지점에서 26.3%의 전력부가효율을 얻었고, 중심 주파수에서 ${\pm}5MHz$이격 지점 에서 -40.4dBc의 인접채널 누설비 (Adjacent Channel Leakage Power : ACLR)를 확인하였다.

Keywords