한국항행학회논문지 (Journal of Advanced Navigation Technology)
- 제12권2호
- /
- Pages.100-108
- /
- 2008
- /
- 1226-9026(pISSN)
- /
- 2288-842X(eISSN)
4세대 이동통신용 이중접지 내장형 광대역 안테나의 설계와 제작에 관한 연구
A Study on the Design and Fabrication of a Dual-Ground and Broad-band Internal Antenna for 4th-Generation Mobile Communications
- 박정률 (목포해양대학교 해양전자통신공학부) ;
- 최병하 (목포해양대학교 해양전자통신공학부) ;
- 공진우 (목포해양대학교 해양전자통신공학부) ;
- 윤현수 (목포해양대학교 해양전자통신공학부) ;
- 김규철 (목포해양대학교 해양전자통신공학부)
- Park, Jung-Ryul (Div. og Marine Electro. & Comm. Eng., Mokpo National Maritime University) ;
- Choi, Byoung-Ha (Div. og Marine Electro. & Comm. Eng., Mokpo National Maritime University) ;
- Kong, Jin-Woo (Div. og Marine Electro. & Comm. Eng., Mokpo National Maritime University) ;
- Yun, Hyun-Su (Div. og Marine Electro. & Comm. Eng., Mokpo National Maritime University) ;
- Kim, Gue-Chol (Div. og Marine Electro. & Comm. Eng., Mokpo National Maritime University)
- 투고 : 2008.02.29
- 발행 : 2008.04.30
초록
본 논문에서는 4세대 이동통신용 이중접지 내장형 고이득, 광대역 안테나를 설계 및 제작하였다. 최적으로 설계된 안테나는 공기층에 의해 분리되어진 방사패치와 접지면의 유동에 의한 안테나의 파손을 막기 위해서 foam(
In this paper, the dual-ground, high-gain and broad-band internal antenna has been designed and fabricated for 4th-generation mobile communication applications. The optimized antenna was fabricated using photolithography method. The antenna consist of the patches, antenna and system ground, and a probe. The patch and ground plane were separated by air. In order to prevent the demage due to radiator swaying, the foams(