Abstract
Use of both carbon fiber (CF) and glass fiber (GF) at the same time to strengthen existing flexural members was exploited. Using a proper volumetric GF / CF ratio, the CF can rupture first followed by subsequent rupture of GF at higher stress and strain showing a pseudo-ductile behavior. A theoretical study indicated that the ratio is 4.62 : 1 and higher where the pseudoductile effect can be shown. Flexural tests of plain concrete beams strengthened using fibers were first carried out. Hybrid FRP sheet using 8.8 : 1 ratio was then fabricated and the sheet was used to strengthen reinforced concrete beams. The RC beams strengthened using 1-ply and 2-ply hybrid sheets both revealed increased strength over a non-strengthened beam and ductile flexural behavior. A comparable beam strengthened using CF also showed increased strength but with limited ductility.
철근콘크리트 휨 부재 보강에 자주 사용하는 탄소섬유 대신 탄소섬유 및 유리섬유 두 가지를 동시에 사용, 보강된 콘크리트 휨 부재의 강도 및 연성을 증진시키는 방안을 연구하였다. 두 가지 섬유의 혼합비가 적절한 경우, 탄소섬유가 선파단하고 보다 큰 변형 및 응력에서 유리섬유가 순차적으로 파단하는 소위 유사연성거동을 보일 수 있다. 본 연구에 사용된 두 가지 섬유가 유사연성거동을 보일 수 있는 이론적인 혼합비는 4.62 : 1 (체적비)로 나타났다. 두 가지 섬유로 보강한 무근콘크리트보의 휨 실험에서 탄소섬유 :유리섬유 = 6.8 : 1 이상인 경우 유사연성거동이 나타남을 확인하였다. 체적비 8.8 : 1의 유리섬유-탄소섬유 하이브리드 시트를 제작하고, 철근콘크리트보를 보강한 후 휨 실험을 수행하였다. 하이브리드 시트 1겹 및 2겹으로 보강한 보에서 모두 무보강 보에 비하여 강도가 증진하는 반면에, 연성이 유지되는 결과를 확인하였다. 하이브리드 시트를 사용하면 탄소섬유를 사용한 보강에 비하여 보다 경제적이면서 탄소섬유와 동등 이상의 강도 및 보다 우수한 연성을 나타내었다. 하이브리드 시트를 사용한 휨 부재 보강에서 한 가지 섬유만을 사용하는 기존의 설계 방법을 적용하여도 보수적인 설계가 가능하였다.