References
- P. Popper, "The Preparation of Dense Self-bonded Silicon Carbide," Speci. Ceram., Heywood London, 207-19 (1960)
- C. W. Forrest, P. Kennedy, and J. V. Shennan, "The Fabrication and Properties of Self-Bonded Silicon Carbide Bodies," Speci. Ceram., British Ceram. Res. Asso., U.K., 5 99-127 (1972)
- J. B. Wachtman Jr., "Structural Ceramics," Academic Press Inc., 29 99-160 (1972)
- J. N. Ness and T. F. Page, "Microstructural Characterization of Reaction-Bonded Silicon Carbide," J. Mater. Sci., 21 1377-97 (1986) https://doi.org/10.1007/BF00553278
- R. Naslain and F. Langlais, "Fundamental and Practical Aspects of the Chemical Vapor Infiltration of Porous Substrates," Carbon, 27 221-35 (1990)
- T. M. Besmann, B. W. Sheldon, R. A. Lowden, and D. P. Stinton, "Vapor-Phase Fabrication and Properties of Continuous-Filament Ceramic Composites," Science, 253 1104-09 (1991) https://doi.org/10.1126/science.253.5024.1104
- R. Naslain, J. Lamon, R. Pailler, X. Bourrat, A. Guette, and F. Langlais, "Micro/minicomposites a Useful Approach to the Design and Development of Nonoxide CMCs," Composites, Part A 30 537-47 (1999)
- K. Sato, A. Tezuka, O. Funayama, T. Issoda, Y. Terada, S. Kato, and M. Iwata, "Fabrication and Pressure Testing of a Gas-Turbine Component Manufactured by a Preceramic-Polymer- Impregnation Method," Compos. Sci. Technol., 59 853-59 (1999) https://doi.org/10.1016/S0266-3538(99)00015-9
- S. M. Dong, Y. Katoh, A. Kohyama, S. T. Schwab, and L. L. Snead, "Microstructural Evolution and Mechanical Performances of SiC/SiC Composites by Polymer Impregnation/Microwave Pyrolysis (PIMP) Process," Ceram. Int., 28 899-905 (2002) https://doi.org/10.1016/S0272-8842(02)00071-8
- A. Sayno, C. Sutoh, S. Suyama, Y. Itoh, and S. Nakagawa, "Development of a Reaction-Sintered Silicon Carbide Matrix Composite," J. Nucl. Mater., 271-272 467-71 (1999) https://doi.org/10.1016/S0022-3115(98)00802-2
- S. P. Lee, Y. Katoh, T. Hinoki, M. Kotani, and A. Kohyama, "Microstructure and Bending Properties of SiC/SiC Composites Fabricated by Reaction Sintering Process," Ceram. Eng. Sci. Proc., 21 [3] 339-46 (2000)
- S.M. Dong, Y. Katoh, and A. Kohyama, "Processing Optimization and Mechanical Evalution of Hot Press 2D Tyranno-SA/SiC Composites," J. Eur. Ceram. Soc., 23 1223-31 (2003) https://doi.org/10.1016/S0955-2219(02)00298-4
- S.M. Dong, Y. Katoh, and A. Kohyama, "Preparation.of SiC/SiC Composites by Hot Press, using Tyranno-SA Fiber as Reinforcement," J. Am. Ceram. Soc., 86 [1] 26-32 (2003) https://doi.org/10.1111/j.1151-2916.2003.tb03272.x
- S.P. Lee, M. Imai, and T. Yano, "Fabrication and Mechanical Properties of Oriented SiC Short-Fiber-Reinforced SiC Composites by Tape Casting," Mater. Sci. Eng., A 339 90-5 (2003) https://doi.org/10.1016/S0921-5093(02)00100-4