References
- 2009, Kasagi, N., Suzuki, Y. and Fukagata, K., "Microelectricalmechanical systems-based feedback control of turbulence for skin friction reduction," Annu. Rev. Fluid Mech., Vol.41, pp.231-251 https://doi.org/10.1146/annurev.fluid.010908.165221
- 2008, Yoshino, T., Suzuki, Y. and Kasagi, N., "Feedback control of turbulence air channel flow with distributed micro sensors and actuators," J. Fluid Sci. Tech., Vol.3, pp.137-148 https://doi.org/10.1299/jfst.3.137
- 1995, Kasagi, N., Sumitani, Y., Suzuki, Y. and Iida, O., "Kinematics of the quasi-coherent vortical structure in near-wall turbulence," Int. J. Heat Fluid Flow, Vol.16, pp.2-10 https://doi.org/10.1016/0142-727X(94)00006-X
- 1967, Kline, S.J., Reynolds, W.C., Schraub, F.A. and Runstadler, P.W., "The structure of turbulent boundary layers," J. Fluid Mech., Vol.30, pp.741-773 https://doi.org/10.1017/S0022112067001740
- 1991, Robinson, S.K., "Coherent motions in the turbulent boundary layer," Annu. Rev. Fluid Mech., Vol.23, pp.601-639 https://doi.org/10.1146/annurev.fl.23.010191.003125
- 1995, Hamilton, J.M., Kim, J. and Waleffe, F., "Regeneration mechanisms of near-wall turbulence structures, " J. Fluid Mech., Vol.287, pp.317-348 https://doi.org/10.1017/S0022112095000978
- 1993, Kravchenko, A.G., Choi, H. and Moin, P., "On the relation of near-wall streamwise vortices to wall skin friction in turbulent boundary layers," Phys. Fluids A, Vol.5, pp.3307-3309 https://doi.org/10.1063/1.858692
- 2002, Fukagata, K., Iwamoto, K. and Kasagi, N., "Contribution of Reynolds stress distribution to the skin friction in wall-bounded flows," Phys. Fluids, Vol.14, L73-L76 https://doi.org/10.1063/1.1516779
- 2004, Bewley, T.R. and Aamo, O.M., "A ''win-win'' mechanism for low-drag transients in controlled 2D channel flow and its implications for sustained drag reduction," J. Fluid Mech., Vol.499, pp.183-196 https://doi.org/10.1017/S0022112003006852
- 2007, Sbragaglia, M. and Sugiyama, K., "Boundary induced nonlinearities at small Reynolds numbers," Physica D, Vol.228, pp.140-147 https://doi.org/10.1016/j.physd.2007.03.004
- 1938, Howarth, L., "On the solution of the laminar boundary layer equations," Proc. Roy. Soc. London Ser. A, Vol.164, pp.547-579
- 2004, Yu, B., Li, F. and Kawaguchi, Y., "Numerical and experimental investigation of turbulent characteristics in a drag-reducing flow with surfactant additives," Int. J. Heat Fluid Flow, Vol.25, pp.961-974 https://doi.org/10.1016/j.ijheatfluidflow.2004.02.029
- 2004 Li, F.-C., Kawaguchi, Y. and Hishida, K. "Investigation on the characteristics and turbulent transport for momentum and heat in a drag-reducing surfactant solution flow," Phys. Fluids, Vol.16, pp.3281-3295 https://doi.org/10.1063/1.1769375
- 2006, Hou, Y., Sommandepalli, V.S.R. and Mungal, M.G., "A technique to determine total shear stress and polymer stress profiles in drag reduced boundary layer flows," Exp. Fluids, Vol.40, pp.589-600 https://doi.org/10.1007/s00348-005-0098-1
- 1994, Choi, H., Moin, P. and Kim, J., "Active turbulence control for drag reduction in wall-bounded flows," J. Fluid Mech., Vol.262, pp.75-110 https://doi.org/10.1017/S0022112094000431
- 2002, Fukagata, K. and Kasagi, N., "Highly energyconservative finite difference method for the cylindrical coordinate system," J. Comput. Phys., Vol.181, pp.478-498 https://doi.org/10.1006/jcph.2002.7138
- 2003, Fukagata, K. and Kasagi, N., "Drag reduction in turbulent pipe flow with feedback control applied partially to wall," Int. J. Heat Fluid Flow, Vol.24, pp.480-490 https://doi.org/10.1016/S0142-727X(03)00058-4
- 1995, Sumitani, Y. and Kasagi, N., "Direct numerical simulationof turbulent transport with uniform wall injection and suction," AIAA J., Vol.33, pp.1220-1228 https://doi.org/10.2514/3.12363
- 2002, Iwamoto, K., Suzuki, Y. and Kasagi, N., "Reynolds number effect on wall turbulence: toward effective feedback control," Int. J. Heat Fluid Flow, Vol.23, pp.678-689 https://doi.org/10.1016/S0142-727X(02)00164-9
- 2007, Xu, J., Dong, S., Maxey, M. and Karniadakis, G., "Turbulent drag reduction by constant near-wall forcing," J. Fluid Mech., Vol.582, pp.79-101 https://doi.org/10.1017/S0022112007005460
- 2005, Fukagata, K., Kasagi, N. and Sugiyama, K., "Feedback control achieving sublaminar friction drag," Proc. 6th Symp. Smart Control of Turbulence, Tokyo, March 2005, pp.143-148
- 2008, Fukagata, K., Sugiyama, K. and Kasagi, N., "On the lower bound of net driving power in controlled duct flows," Physica D, submitted
- 2005, Iwamoto, K., Fukagata, K., Kasagi, N. and Suzuki Y., "Friction drag reduction achievable by near-wall turbulence manipulation at high Reynolds number," Phys. Fluids, Vol.17, Art. No.011702
- 1978, Dean, R.B., "Reynolds number dependence of skin friction and other bulk flow variables in two-dimensional rectangular duct flow," Trans. ASME J. Fluids Eng., Vol.100, pp.215-223 https://doi.org/10.1115/1.3448633
- 2004, Fukagata, K. and Kasagi, N., "Suboptimal control for drag reduction via suppression of near-wall Reynolds shear stress," Int. J. Heat Fluid Flow, Vol.25, pp.341-350 https://doi.org/10.1016/j.ijheatfluidflow.2004.02.015
- 1998, Lee, C., Kim, J. and Choi, H., "Suboptimal control of turbulent channel flow for drag reduction," J. Fluid Mech., Vol.358, pp.245-258 https://doi.org/10.1017/S002211209700815X
- 2002, Xu, C.-X., Choi, J.-I. and Sung, H.J., "Suboptimal control for drag reduction in turbulent pipe flow," Fluid Dyn. Res., Vol.30, pp.217-231 https://doi.org/10.1016/S0169-5983(02)00041-2
- 2004, Fukagata, K. and Kasagi, N., "Feedback control of near-wall Reynolds shear stress in wall-turbulence," Proc. 4th Int. Symp. Advanced Fluid Information and Transdisciplinary Fluid Integration, Sendai, Nov. 2004, pp.346-351
- 2006, Min, T., Kang, S.M., Speyer, J.L. and Kim, J., "Sustained sub-laminar drag in a fully developed channel flow," J. Fluid Mech., Vol.558, pp.309-318 https://doi.org/10.1017/S0022112006000206
- 2008, Mamori, H., Fukagata, K., Hoepffner, J. and Obi, S., "Linear analysis of drag reduction in channel flow by wall heating/cooling," Proc. 7th EUROMECH Fluid Mech. Conf., Manchester, UK, September 14-18, p.207
- 2008, Hoepffner, J. and Fuakgata, K., "Pumping or drag reduction?" J. Fluid Mech., submitted
- 2008, Fukagata, K., Kern, S., Chatelain, P., Koumoutsakos, P. and Kasagi, N., "Evolutionary optimization of an anisotropic compliant surface for turbulent friction drag reduction," J. Turbulence, Vol.9. N35, pp.1-17 https://doi.org/10.1080/14685240701767332
- 1990, Carpenter, P.W. and Morris, P.J., "The effect of anisotropic wall compliance on boundary-layer stability and transition," J. Fluid Mech., Vol.218, pp.171-223 https://doi.org/10.1017/S0022112090000970
- 2006, Fukagata, K., Kasagi, N. and Koumoutsakos, P., "A theoretical prediction of friction drag reduction in turbulent flow by superhydrophobic surfaces," Phys. Fluids, Vol.18, Art. No.051703
- 2003, Xu, S., Rempfer, D. and Lumley, J., "Turbulence over a compliant surface: numerical simulation and analysis," J. Fluid Mech., Vol.478, pp.11-34
- 2000, Kang, S. and Choi, H., "Active wall motions for skin-friction drag reduction," Phys. Fluids, Vol.12, pp.3301-3304 https://doi.org/10.1063/1.1320833
- 2001, Hansen, N. and Ostermeier, A., "Completely derandomized selfadaptation in evolution strategies," Evol. Comput., Vol.9, pp.159-195 https://doi.org/10.1162/106365601750190398
- 2004, Kern, S., Müller, S. D., Hansen, N., Büche, D., Ocenasek, J. and Koumoutsakos, P., "Learning probability distributions in continuous evolutionary algorithms - a comparative review," Natural Computing, Vol.3, pp.77-112 https://doi.org/10.1023/B:NACO.0000023416.59689.4e
- 1999, Koumoutsakos, P., "Vorticity flux control in a turbulent channel flow," Phys. Fluids, Vol.11, pp.248-250 https://doi.org/10.1063/1.869874
- 2008, Shimada, K., Fukagata, K. and Obi, S., "Numerical simulation of a plane mixing layer with periodic excitation," Proc. 7th JSME-KSME Thermal and Fluids Engineering Conf., Sapporo, October 13-16, No. Paper L141, pp.1-4
- 2008, Naito, H., Fukagata, K. and Obi, S., "Passive control of flow around a circular cylinder using porous media," Proc. 7th JSME-KSME Thermal and Fluids Engineering Conf., Sapporo, October 13-16, No. Paper L111, pp.1-4