Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

A Study on the Prediction and Measurement of Transmission Error for High Speed Gear

고속회전용 기어의 전달오차 예측 및 측정에 관한 연구

  • Son, Yu-Sun (School of Mechanical & Aerospace Engineering, Geyongsang Nati. Univ.) ;
  • Bae, Hyo-Je (School of Mechanical & Aerospace Engineering, Geyongsang Nati. Univ.) ;
  • Tak, Sung-Hoon (School of Mechanical & Aerospace Engineering, Geyongsang Nati. Univ.) ;
  • Zhang, Qi (School of Mechanical & Aerospace Engineering, Geyongsang Nati. Univ.) ;
  • Lyu, Sung-Ki (School of Mechanical & Aerospace Engineering, Geyongsang Nati. Univ.)
  • 손유선 (경상대학교 대학원 기계항공공학부) ;
  • 배효제 (경상대학교 대학원 기계항공공학부) ;
  • 탁성훈 (경상대학교 대학원 기계항공공학부) ;
  • 장기 (경상대학교 대학원 기계항공공학부) ;
  • 류성기 (경상대학교 기계항공공학부)
  • Published : 2008.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

Keywords

References

  1. Harris, S. L., 'Dynamic load on the teeth of spur gears,' Proc. Instn Mech. Engrs., Vol. 172, pp. 87-112, 1958
  2. Smith, J. D., 'Gears and Their Vibration,' Marcel Dekker Inc., 1983
  3. Mark, W. D., 'Analysis of the vibratory excitation of gear systems: basic theory,' The Journal of the Acoustical Society of America, Vol. 63, Issue 5, pp. 1409-1430, 1978 https://doi.org/10.1121/1.381876
  4. Mark, W. D., 'Analysis of the vibratory excitation of gear systems, II: tooth error representations, approximations, and application,' The Journal of the Acoustical Society of America, Vol. 66, Issue 6, pp. 1758-1787, 1979 https://doi.org/10.1121/1.383649
  5. Walker, H., 'Gear Tooth Deflection and Profile Modification,' The Engineer, Vol. 166, pp. 409-412, 1938
  6. Walker, H., 'Gear Tooth Deflection and Profile Modification,' Part 2, The Engineer, Vol. 166, pp. 434-436, 1938
  7. Niemann, G. and Baethge, J., 'Drehwegfehler, Zzahnfederharte und Gerdusch bei Stirnradern,' VDI-Z, Vol. 112, No. 4, pp. 205-214, 1970
  8. Niemann, G. and Baethge, J., 'Drehwegfehler, Zzahnfederharte und Gerdusch bei Stirnradern,' VDI-Z, Vol. 112, No. 8, pp. 475-499, 1970
  9. Munro, R. G., Yildirim, N. and Hall, D. M., 'Optimum Profile Relief and Transmission Error in Spur Gears,' Proceedings of Institution of Mechanical Engineers, Vol. 404, No. 13, pp. 35-42, 1990
  10. Houser, D. R., 'Gear Noise Sources and Their Prediction Using Mathematical Model,' Gear Design, pp. 213-222, 1990
  11. Houser, D. R. and Singh, R., 'Gear Noise Basic Short Course Notes,' Gearlab-The Ohio State University, 2003
  12. Houser, D. R. and Harianto, J. H., 'The Effect of Micro-Geometry and Load on Helical Gear Noise Excitations,' SAE 2005 Noise and Vibration Conference and Exhibition, No. 2005-01-02295, 2005