References
- Sakamoto, T., 1987, 'Normal Displacement and Dynamic Friction Characteristics in a Stick-slip Process', Tribology, Vol. 20, pp. 25-31 https://doi.org/10.1016/0301-679X(87)90005-3
- Paros, J. M. and Weisbord L., 1965, 'How to Design Flexure Hinge', Mach. Des., Vol. 37, pp. 151-157
- Choi S. B., Han S. S. and Lee Y. S., 2005, 'Fine Motion Control of a Moving Stage Using a Piezoactuator Associated with a Displacement Amplifier', Smart Mater. Struct., Vol. 14, pp. 222-230 https://doi.org/10.1088/0964-1726/14/1/022
- Armstrong-H'elouvry, B., 1991, Control of Machines with Friction, Kluwer Academic Publishers
- Her, I. and Chang, J. C., 1994, 'A Linear Scheme for the Displacement Analysis of Micropositioning Stages with Flexure Hinges', ASME Journal of Mechanical Design, Vol. 116, pp. 770-776 https://doi.org/10.1115/1.2919449
- Lin, L. C., Sheu J. W. and Tsay J. H., 2001, 'Modeling and Hierarchical Neuro-fuzzy Control for Flexure-based Micropositioning Systems', Journal of Intelligent & Robotic Systems, Vol. 32, pp. 411-435 https://doi.org/10.1023/A:1014228021873
- Yang, R., Jouaneh, M. and Schweizer, R., 1996, 'Design and Characterization of a Low-profileMicro-positioning Stage', Precision Engineering, Vol. 18, pp. 20-29 https://doi.org/10.1016/0141-6359(95)00032-1
- Jouaneh, M. and Yaun, R., 2003, 'Modeling of Flexure-hinge Type Lever Mechanisms', Precision Engineering, Vol. 27, pp. 407-418 https://doi.org/10.1016/S0141-6359(03)00045-X
- Armstrong-H'elouvry, B., Dupont, P. and Canudas de Wit, C., 1995, 'A Survey of Models, Analysis Tools and Compensation Methods for the Control of Machines with Friction', Automatica, Vol. 30, pp. 1083-1138 https://doi.org/10.1016/0005-1098(94)90209-7
- Kogut, L. and Etsion, I., 2004, 'A Static Friction Model for Elasto-plastic Contacting Rough Surfaces', ASME, J. Tribology, Vol. 126, p. 34 https://doi.org/10.1115/1.1609488
- Kim, J. H., Kim, S. h. and Kwak, Y. K., 2003, 'Optimization of a Piezoelectric Actuator using Bridge-type Hinge Mechanism', Journal of the Korean Society of Precision Eng., Vol. 20, No. 2, pp. 168-175
- Lobontiu, N. and Garcia, E., 2003, 'Analytical Model of Displacement Amplification and Stiffness Optimization for a Class of Flexure-based Compliant Mechanisms', Comput. Struct., Vol. 81, pp. 2797-2810 https://doi.org/10.1016/j.compstruc.2003.07.003
- Choi, M. K., Nguyen, Q. H., Yun, B. Y. and Choi, S. B., 2006, 'Design and Control of Jetting Dispenser 6Driven by Piezoelectric Actuator', Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 16, No. 11, pp. 1165-1171 https://doi.org/10.5050/KSNVN.2006.16.11.1165
- Karnopp, D., 1985, 'Computer Simulation of Slip-stick Friction in Mechanical Dynamic Systems', Journal of Dynamic Systems, Measurement and Control, Vol. 107, No. 1, pp. 100-103 https://doi.org/10.1115/1.3140698
- Xie, W., De Meter, E. C. and Trethwey M. W., 2000, 'An Experimental Evaluation of Coefficients of Static Friction of Common Workpiece-fixture Element Pairs', Int. J. Mach. Tools Manuf, Vol. 40, pp. 467-488 https://doi.org/10.1016/S0890-6955(99)00082-6
- Hwang, D. H. and Zum Gahr, K. H., 2003, 'Transition from Static to Kinetic Friction of Unlubricated or Oil Lubricated Steel/Steel, Steel/Ceramic and Ceramic/Ceramic Pairs,' Wear, Vol. 255, pp. 365-375 https://doi.org/10.1016/S0043-1648(03)00063-2
- Lee, C. H. and Polycarpou, A. A., 2007, 'Static Friction Experiments and Verification of an Improved Elastic-plastic Model Including Roughness Effects', ASME J. Tribology, Vol. 129, pp. 754-760 https://doi.org/10.1115/1.2768074
- Basava, S. and Hess, D. P., 1998, 'Bolted Joint Clamping Force Variation due to Axial Vibration', Journal of Sound and Vibration, Vol. 210, No. 2, pp. 255-265 https://doi.org/10.1006/jsvi.1997.1330