한국공작기계학회논문집 (Transactions of the Korean Society of Machine Tool Engineers)

한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지

경량화 피스톤 로드에 사용되는 SM45C/SM45C-Pipe의 마찰용접시 업셋압력이 미치는 영향

Effect of Upset pressure on weldability in the Friction Welding of SM45C-Solid and SM45C-Pipe which is used in the Piston-Rod

  • 민병훈 (충남대학교 교육대학원) ;
  • 최원용 (충남대학교 기계공학과) ;
  • 민택기 (충남대학교 기계공학과)
  • 발행 : 2008.10.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This research is tendencious to manufacture solid piston-rod of shock absorber as hollow piston-rod using friction welding. The SM45C has been welded to the SM45C-pipe in order to investigate the effect of upset pressure on friction weldability. The friction time and upset pressure was variable conditions under the conditions of spindle revolution of 2,000rpm, friction pressure of 55MPa, and upset time of 2.0seconds. Under these conditions, the microstructure of weld interface, tensile fracture surface and mechanical tests were studied of friction weld, and so the results were as follows. When the upset pressure is sufficient, gets the high tensile strength. The optimal welding conditions were n=2,000rpm, $P_1$=55MPa, $P_2$=95MPa, $t_1$=1.5sec, $t_2$=2.0sec when the total upset length is 4.5mm.

키워드

참고문헌

  1. Lee, S. Y. and Yun, B. S., 2001, "Heat Transfer Analysis of Friction Welding of A2024 to SM45C," KSMTE, Vol. 10, No. 1, pp. 65-70
  2. Jeong, H. S., 1997, "Fundamentals and Basic Application of Friction Welding," KWS, Vol. 15, No. 6, pp. 1-12
  3. Spindler, D. E., 1994, "What industry needs to know about friction welding," Welding Journal, Vol. 73, Issue. 3, pp. 37-42
  4. Nicholas, E. D., 1977, "Where Industry Uses Friction Welding," Welding Design and Fabrication, Vol. 50, No. 8, pp. 74-76
  5. Min, B. H., Lim, H. T., and Min, T. K., 2008, "A Study on the Friction Welding for Light Piston-Rod (SM45C/SM45C-Pipe)," KWJS, Vol. 26, No. 2, pp. 55-61
  6. Oagawa, K., Yamaguchi, H., Kaga, S., and Sakaguchi, K., 1993, "Optimization of Friction welding Condition for S45C Carbon Steel Using a Statical Technique," Tansactions of the Welding Society, Vol. 24, No. 2, pp. 133-139
  7. Park, K. H., Min, T. K., Yoon, Y. J., and Park, C. S., 2006, "A Study on the Joint Properties according to the Friction Welding Area Change of Carbon Steel(SM45C)," KSMTE, Vol. 15, No. 1, pp. 102-107
  8. Oh, S. K., Park, J. B., and Kong, Y. S., 1999, "A Study on Optimization of Friction Welding of Automobile Component Materials(SM40C) and Its Real Time Quality Evaluation by AE," KCORE, Vol. 13, No. 1, pp. 88-93