Tribology and Lubricants

Korean Tribology Society (한국트라이볼로지학회)
권호 표지
DOI QR코드

DOI QR Code

Tribological Characteristics of Carbon Nanotube Aluminum Composites According to Fabrication Method and Content of Carbon Nanotube

알루미늄탄소나노튜브 복합재의 가공 방법과 탄소나노튜브 함량에 따른 트라이볼로지 특성

  • Lee, Young-Ze (Dept. of Mechanical Engineering, SungKyunKwan University) ;
  • Lee, Jung-Hee (Dept. of Mechanical Engineering, SungKyunKwan University) ;
  • Kim, Il-Young (Dept. of Mechanical Engineering, SungKyunKwan University) ;
  • Lee, Gyu-Sun (Dept. of Mechanical Engineering, SungKyunKwan University) ;
  • Baik, Seung-Hyun (Dept. of Mechanical Engineering, SungKyunKwan University) ;
  • Youn, Jeong-Il (Dept. of Advanced Materials Engineering, SungKyunKwan University) ;
  • Kim, Young-Jig (Dept. of Advanced Materials Engineering, SungKyunKwan University)
  • 이영제 (성균관대학교 기계공학과) ;
  • 이중희 (성균관대학교 기계공학과) ;
  • 김일영 (성균관대학교 기계공학과) ;
  • 이규선 (성균관대학교 기계공학과) ;
  • 백승현 (성균관대학교 기계공학과) ;
  • 윤정일 (성균관대학교 신소재공학과) ;
  • 김영직 (성균관대학교 신소재공학과)
  • Published : 2008.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

Carbon nanotube composite is considered to be a good candidate material for composite material because of its excellent mechanical property and low density under high temperature as well as good wear and frictional properties. In this study, tribological characteristics of carbon nanotube aluminum composite were evaluated using pin-on-disk wear tester. Spark Plasma Sintering method is more effective than Hot Pressing method in terms of wear and friction. The composite with 1% CNT has the lowest friction and wear characteristic.

Keywords

References

  1. Sumio Iijima, 'Helical Microtubules of Graphitic Carbon', Nature, Vol. 354, pp. 56-58, 1991 https://doi.org/10.1038/354056a0
  2. 이영희, '탄소나노튜브의 물성과 이해', 새물리, 제51권, pp. 84-144, 2005
  3. 소대섭외 3인, '탄소나노튜브', 한국과학기술정보연구원, 2002
  4. M.Tokita, 'Trend in Advanced SPS Spark Plasma Sintering Systems and Technology', J. Powder Tech., Japan, Vol. 30, pp. 790, 1993 https://doi.org/10.4164/sptj.30.11_790
  5. K.S.Cho, S.Kim, S.H.Beak, H.J.Choi, and J.G.Lee, 'The Effect of La-silican Oxynitride on the Densification of Si3N4 Ceramics by Spark Plasma Sintering', J. Kor. Cerm. Soc., Vol. 38, pp. 687, 2001
  6. William J. Clegg, 'Role of Carbon in the Sintering of Boron-Doped Silicon Carbide', J. Am. Ceram. Soc., Vol. 83, pp. 1039, 2000 https://doi.org/10.1111/j.1151-2916.2000.tb01327.x
  7. G.-D. Zhan, J.D. Kuntz, J. Wan, and A.K. Mukherhee, Nat. Mater., Vol. 2, pp. 38-42, 2003 https://doi.org/10.1038/nmat793
  8. L.M. Tham, M. Gupta, and L. Chen, Acta Mater., Vol. 49, pp. 3243-3253, 2001 https://doi.org/10.1016/S1359-6454(01)00221-X