초록
본 연구에서는 국내 한 정수장의 고도정수처리공정의 실험분석 자료를 바탕으로 정수장으로 유입되는 원수의 수질특성과 처리공정별 오염물질 제거효율의 변화특성을 연구하였고, 활성탄여과조의 역세척에 따른 BAC 내의 미생물 거동을 추적하였다. KMnO$_4$ 소비량 등 8$\sim$9개의 주요 항목을 중심으로 제거특성이 연구되었고, 활성탄여과조의 유입 유출수에 대하여 NH$_3$-N 등 4항목의 농도변화를 추적하였다. 역세척 전 후의 활성탄 시료의 SEM 사진을 촬영하였고, 미생물 생체량(HPC) 조사를 통해 활성탄 부착미생물의 존재를 확인하고자 하였다. 유입원수의 특성은 대부분의 조사항목이 일정한 농도범위로 유입되었고 그 중 계절적 일관성을 갖는 항목이 있었다. 공정별 제거효율 변화특성은 월별 일정한 유형을 갖는 것, 공정진행에 따라 지속적으로 제거되는 것, 오존접촉조에서 제거효율이 떨어지는 것 등으로 분류되었고, 현재 운전되고 있는 고도처리공정에서 제거되는 주요 대상오염물질을 구별할 수 있었다. NH$_3$-N의 농도변화 곡선으로 활성탄여과조 내에 미생물이 존재함을 예측하여 SEM 사진과 HPC 측정으로 이를 확인하였다.
In this paper, the property of influent water and variations of removal efficiencies in each unit processes were studied based on the experiment data from the advanced water treatment plant in a city of Korea. The microbial species in the biological activated carbon(BAC) after backwashing of activated carbon filtration tank(ACFT) were also identified. The property and the removal efficiencies were evaluated by considering 8-9 items. The variations of 4 items were investigated from the influent and effluent of ACFT. SEM recording were conducted on BAC samples before and after backwashing. And the existence of attached microorganisms were identified through HPC(Heterotrophic Plate Counter) investigation. For the property of influent water, the concentrations of most items were maintained in the constant ranges, some items had seasonal properties. For the removal efficiencies, there were some items showing similar monthly-pattern and increasing with time, other items decreasing at the ozone contactor. Through these investigations, it was possible to distinguish the target items, which were removed by the advanced processes. The existence of microorganisms in ACFT could be predicted based on the variation curve of NH$_3$-N, and this fact were proved by SEM and HPC.