A Study on the Optimization for the Blasting Process of Glass by Taguchi Method

다구찌 기법을 이용한 유리소재의 블라스팅 가공공정의 최적화에 관한 연구

  • Yoo, Woo-Sik (Department of Industrial & Management Engineering, University of Incheon) ;
  • Jin, Quan-Qia (Department of Mechanical Engineering, University of Yanbian) ;
  • Chung, Young-Bae (Department of Industrial & Management Engineering, University of Incheon)
  • Published : 2007.06.30

Abstract

The powder blasting process has become an important machining technique for the cost effective fabrication of micro devices. This process is similar to sand blasting, and effectively removes hard and brittle materials. A large number of investigations on the abrasive jet machining with such output parameters as material removal rate, penetration and surface roughness have been carried out and reported by various authors. To achieve higher surface roughness, to increase material removal rate and to identify the influence of blasting parameters on the output parameters, we use the taguchi method which is one of the design methods of experiments. We can select process parameters to optimize the blasting process of glass. Experimental results indicate that the taguchi method is useful as a robust design methodology for the powder blasting process.

Keywords

References

  1. 박경호, 오영탁, 박동삼; 'Powder Blasting에 의한 미세 포켓의 기계적 에칭', 한국정밀공학회지, 19(1) : 219-226, 2002
  2. 박성현; 현대실업계획법, 민영사, pp. 563-580, 1993
  3. 최종순, 박경호, 박동삼; 'Micro Abrasive Jet Machining을 이용한 유리의 미세 홈 가공', 한국정밀공학회지, 18(10) : 178-183, 2001
  4. 홍정의; '다구찌 방법과 신경회로망을 이용한 사출성형 가공공저의 최적 가공조건 선정에 관한 연구', 한국경영시스템학회지, 25(2) : 71-72, 2002
  5. Henk Wensink, Berenshot, U. W., Jan seu, H. V., and Elwenspoek, M. C.; 'High Resolution Powder Blast Micromachining,' Proceedings of the IEEE Micro Electro Mechanical Systems 2000, pp. 769-774, 2000
  6. Jain, R. K., Jain, V. K., and Kalra, P. K.; 'Modelling of Abrasive Flow Machining Process: A Neural Network Approach,' Wear, 231 : 242-248, 1999 https://doi.org/10.1016/S0043-1648(99)00129-5
  7. Jain, V. K. and Adsul, S. G.; 'Experimental Investigation into Abrasive Flow Machining,' Int. J. Machine Tool, & manufacture, 40 : 1003-1021, 2000 https://doi.org/10.1016/S0890-6955(99)00114-5
  8. Kim, J.-S.; 'Application of Taguchi and response surface methodologies for geometric error in surface grinding process,' Int. J. Machine Tools, & Manufacture, 45 : 327-334, 2005 https://doi.org/10.1016/j.ijmachtools.2004.08.007
  9. Lighthart, H. J., Slikkerveer, P. J., In't Verd, F. H.; 'Glass and Glass Machining in Zeus Panels,' Philips J. Res., 50(3/40) : 475-499, 1996 https://doi.org/10.1016/S0165-5817(97)84687-6
  10. Marshall, D. B., Lawn, B. R., and Evans, A. G.; 'Elastic/Plastic indentation damage in ceramics: the lateral crack system,' J. Am. Ceram. Soc., 65 : 561-566, 1982 https://doi.org/10.1111/j.1151-2916.1982.tb10782.x
  11. Slikkerveer, P. J., Bouten, P. C. P., and deHaas, F. C. M.; 'High quality mechanical etching of brittle materials by powder blasting,' Sensors and Actuators, 85 : 296-303, 2000 https://doi.org/10.1016/S0924-4247(00)00343-5