코깅 토오크 저감을 위한 Spoke형 BLDC 전동기의 회전자 극 형상설계에 관한 연구

Rotor Pole Shape Design for Reducing a Cogging Torque in Spoke Type BLDC Motor

  • 황규윤 (한양대 전자전기제어계측공학과) ;
  • 이상봉 (성균관대 정보통신공학부) ;
  • 양병열 (삼성전자) ;
  • 권병일 (한양대 전자전기제어계측공학과)
  • 발행 : 2007.05.01

초록

In this paper. design of spoke type BLDC motor which have a characteristics of concentrating fluxes and relatively high reluctance torque among IPM BLDC motors has been researched. To reduce cogging torque and torque ripple. rotor pole shape of optimal design is proposed. To clearly see the effects due to the changed rotor pole shape. magnetic circuit model. 2D FEM and design of experiments (DOE) are used. Then considering these results proper rotor pole shape which have an good effect on air gap flux density and cogging torque. back-emf is designed. Moreover. the validity of proposed model in this paper is also verified by comparison between gained experiment and analysis data.

키워드

참고문헌

  1. T.J.E. Miller, Design of Brushless Permanent-Magnet Motors, Clarendo Press, Oxford, 1994
  2. D. Hanselman 'Brushless Permanent Magnet Motor Design', Duane Hanselma, 2nd ed, 2003
  3. 윤근영, 류세현, 양병렬, 권병일, 영구자석 형상비를 고려한 영구자석 매입형 BLDC 전동기 설계 및 특성해석, 대한전기학회논문지 Trans. Vol. 55B, No. 1, pp 1-8, Jan, 2006
  4. 강규홍, 이병국, 허진, '자속 집중형 Spoke Type 영구 자석 BLDC 전동기의 자기회로 및 특성해석, 대한전기학회논문지 Trans. Vol. 53B, No. 3, pp. 1-8, Mar, 2004
  5. B. Y. Yang, K. Y. Yun,. B. I. Kwon, 'Designing Method of Flux Barriers in Rotor for Reducing Cogging Torque', COMPUMAG2005, Shentang, IV-26, PG1-7, June, 2005
  6. Z. Q. Zhu, S. Ruangsinchaiwanich, N. Schofield, D. Howe, 'Reducing of Cogging Torque In Interior-Magnet Brushless Machines', IEEE Transactions on Magnetics, Vol.39, No.5, September, 2003
  7. S. P. Hong, H. S. Cho, H. S. Lee, H. R. Cho, 'Effect of the Magnetization Direction in Permanent Magnet on Motor Characteristics', IEEE Transactions on Magnetics, Vol.35, No.3, May, 1999 https://doi.org/10.1109/20.767172
  8. N. Bianchi, S. Bolognani, 'Design Techniques for Reducing the Cogging Torque in Surface-Mounted PM Motors', IEEE Transactions on Magnetics, Vol.38, No.5, September/October, 2002 https://doi.org/10.1109/TIA.2002.802989
  9. K. Y. Hwang, S. B. Rhee, B. Y. Yang, B. I. Kwon, 'Rotor Pole Design in Spoke Type BLDC Motor by RSM', CEFC 2006, PE-4,2006 IV-26, PGI-7, June, 2005 https://doi.org/10.1109/CEFC-06.2006.1633215
  10. S. I. Kim, J. Y. Lee, Y. K. Kim, J. P. Hong, Y. Hur, Y. H. Jung, 'Optimization for Reduction of Torque Ripple in Interior Permanent Magnet Motor by Using the Taguchi Method', IEEE Transactions on Magnetics, Vol.41, No.5, May, 2005 https://doi.org/10.1109/TMAG.2005.846478
  11. U. Kim, D. K. Lieu. 'Magnetic Field Calculation in Permanent Magnet Motors with Rotor Eccentricity: Without Slotting Effect', IEEE Transactions on Magnetics, Vol.39, No.4, July, 1998 https://doi.org/10.1109/20.703862
  12. 박성현 '현대실험계획법', 민영사 2004