Abstract
An investigation has been made on the relationship between characteristics of Acoustic Emission (AE) signal in welding flaw and the stress corrosion defect in-service for the high pressure pipe steel. In order to tackle the problem of welding flaw in high pressure pipe, specimens were made by the aid of the application of both corrosion liquid usage and a quenching method after local heating. The amplitude of signal was $60{\sim}75\;dB$ in the territory which is suspected for defect, and the specimens which only have welding flaw showed gradients of 0.034, 0.034, 0.035. Moreover, there is a certain increase in gradient even though the differences are very slight. That is, corrosion specimens showed new gradients of 0.040, 0.039, 0.041 which put welding flaw and corrosion mechanism together. After pressurizing 3 minutes, AE signal has been detected from welding flaw easily in each part of the section. It is possible to predict the occurrence and also prevent the damage of stress corrosion crack which has characteristics of cleavage fracture.
SPPH강의 응력부식 균열과 용접 결함의 AE 신호의 특성을 살펴보았다. 고압배관 용접부의 결함 진전을 유도하기 위하여 부식용액(NaOH)과 국부가열 후 급랭 등의 기법을 적용하여 시험체를 제작하였다. AE 신호분석 결과, 결함으로 의심되는 영역에서 발생되는 AE 신호의 진폭은 $60{\sim}75\;dB$로 나타났으며 누적 진폭 분포 특성 조사에서 용접결함만이 존재하는 시험체는 0.034, 0.034, 0.035의 기울기를 나타내며 부식을 가한 시험체는 용접결함 기구와 부식기구가 합해져 새로운 기울기인 0.040, 0.039, 0.041로 그 차이는 적으나 기울기의 증가가 확인되었다. 가압 3분 이후 각 구간에서 응력부식결함에 의한 AE신호의 검출이 용이하였고 본 실험을 통하여 급작스런 취성파괴를 일으키는 특성을 가지고 있는 응력부식균열(SCC)의 발생 예측과 피해 예방이 가능함을 알 수 있었다.