A STUDY ON THE COLOR STABILITY OF RESIN CEMENTS LUTED FOR PORCELAIN LAMINATE VENEER

도재라미네이트 접착용 레진시멘트의 색조 안정성에 관한 연구

  • Kim, Young-Woon (Department of Prosthodontics, College of Dentistry, Chonnam University) ;
  • Park, Ha-Ok (Department of Prosthodontics, College of Dentistry, Chonnam University) ;
  • Vang, Mong-Sook (Department of Prosthodontics, College of Dentistry, Chonnam University) ;
  • Yang, Hong-So (Department of Prosthodontics, College of Dentistry, Chonnam University) ;
  • Park, Sang-Won (Department of Prosthodontics, College of Dentistry, Chonnam University)
  • 김영운 (전남대학교 치의학전문대학원 치과보철학교실) ;
  • 박하옥 (전남대학교 치의학전문대학원 치과보철학교실) ;
  • 방몽숙 (전남대학교 치의학전문대학원 치과보철학교실) ;
  • 양홍서 (전남대학교 치의학전문대학원 치과보철학교실) ;
  • 박상원 (전남대학교 치의학전문대학원 치과보철학교실)
  • Published : 2007.04.30

Abstract

Statement of problems: Long-term success of esthetic restorations, depends on various factors, especially on color stability of the restorations. The color stability is affected by resin cements beneath the porcelain laminate veneers. Purpose: The purpose of this study was to comprehend the color stability of resin cements by comparing with 4 different kinds of resin cements (Choice, Variolink II, Nexus 2, Rely-X). Material and methods: Porcelain laminate disk samples were luted with resin cements. After thermocycling of each 1000, 2000 and 3000 cycle, specimens were measured by spectrophotometers and the color differences were. Results: 1. After thermocycling of 1000, 2000 and 3000cycle, color difference, $({\Delta}E^*)$ of all specimens were incresed, but were not statiscally significant differences. 2. In the Choice of A1 shade and the Nexus 2 of A3 shade, color difference$({\Delta}E^*)$ after thermocycling of 3000cycle was $incre^*ased$ significantly than after thermocycling of 1000cycle. However, other groups did not show any statistically significant differences (P<0.05). 3. After thermocycling of 3000cycle, color difference$({\Delta}E^*)$ between A1 shade and A3 shade of Nexus 2 showed statistically significant difference. However no statistically significant differences were observed in other groups (P<0.05). 4. The mean of color difference$({\Delta}E^*)$ is 1.0-2.06 after 3000 thermocycling and the data were ranked in the ascending order of Variolink II, Nexus 2, Choice and Rely-X in A1 shade group and Choice, Rely-X, Variolink II and Nexus 2 in A3 shade group. Conclusion: Above results revealed that, after 3000 thermocycing, the color difference $({\Delta}E^*)$ of experimental resin cements was within clinically acceptable ranges. Color stability of 4 different resin cements was comparatively excellent.

Keywords

References

  1. Highton R, Caputo AA, Matayas ASD. A photoelastic study of stresses on porcelain laminate preparations. J Prosthet Dent 1987;58:157-161 https://doi.org/10.1016/0022-3913(87)90168-5
  2. Quinn F, McCornell RJ. Porcelain laminates: A review. Br Dent J 1986;161:61- 65 https://doi.org/10.1038/sj.bdj.4805896
  3. Calamia JR. Etched porcelain veneers: The current state of the art. Quintessence Int 1985;1:5-12
  4. McCornell RJ, Boksmann L, Jones G. Esthetic restoration of a primary canine on the adult dentition by means of an etched porcelain veneer. Report of a case. Quintessence Int 1987;18:121-124
  5. Dumfahrt H, Schaffer H. Porcelain laminate veneers. A retrospective evaluation after 1 to 10 years of service: Part II-clinical results. Int J Prosthodont 2000;13:9- 18
  6. Anusavice KJ. Philips' Science of Dental Materials. 11th ed., Saunders, Missouri, USA, 2003;443-494
  7. Craig RG. Restorative Dental Materials. St Louis: Mosby-Year Book, 1993;200-201
  8. Noie F, O'Keefe KL, Powers JM. Color stability of resin cements after accelerated aging. Int J Prosthodont 1995;8:51-55
  9. Nathanson D, Banasr F. Color stability of resin cements-an in vitro study. Pract Proced Aesthet Dent 2002;14:449-455
  10. Hekimoglu C, Anil N, Etikan I. Effect of accelerated aging on the color stability of cemented laminate veneers. Int J Prosthodont 2000;13:29-33
  11. Buonocore MGA. Simple method of increasing the adhesion of acrylic filling materials to enamel surfaces. J Dent Res 1955;34:849-53 https://doi.org/10.1177/00220345550340060801
  12. Bowen RL. Synthesis of a silica-resin direct filling material. J Dent Res 1958; 37:90
  13. Rochette A. Attachment of a splint to enamel of lower anterior teeth. J Prosthet Dent 1973;30:418-23 https://doi.org/10.1016/0022-3913(73)90163-7
  14. Greggs TS. Method for cosmetic restoration of anterior teeth. United states patent No. 4,473,353. Filed 15 April 1983; Date of patent 12 September 1984
  15. Calamia JR, Simonsen RJ. The tensile bond strength of etched porcelain. J Dent Res 1983; Abstract 1154
  16. Calamia JR, Simonsen RJ. The effect of coupling agents on bond strength of etched porcelain. J Dent Res 1984;63:162 https://doi.org/10.1177/0022034584063S101
  17. Schneider PM, Messer LB, Douglas WH. The effect of enamel surface reduction in vitro on bonding composite resin to permanent human enamel. J Dent Res 1981; 60:895-900 https://doi.org/10.1177/00220345810600050801
  18. Davis BK, Auilino SA, Lund PS, Diaz- Arnold AM, Denehy GE. Colorimetric evaluation of the effect of porcelain opacity on the resultant color of porcelain veneers. Int J Prosthodont 1992;5:130-136
  19. Terada Y, Macyama S, Hirayasu R. The influence of different thicknesses of dentin porcelain on the color reflected from thin opaque porcelain fused to metal. Int J Prosthodont 1989;2:352-356
  20. Sproull RC. Color matching in dentistry. Part II: Practical applications of the organization of color. J Prosthet Dent 1973; 29:556-566 https://doi.org/10.1016/0022-3913(73)90036-X
  21. Goodkind RJ, Loupe MJ. Teaching of color in predoctoral and postdoctoral dental education in 1988. J Prosthet Dent 1992; 67:713-717 https://doi.org/10.1016/0022-3913(92)90177-C
  22. Culpepper WD. A comparative study of shade matching procedure. J Prosthet Dent 1970;24:166-173 https://doi.org/10.1016/0022-3913(70)90140-X
  23. O'Neal SJ, Powell WD. A comparative study of shade matching procedures. J Prosthet Dent 1984;63:174
  24. Van der Burgt TP, ten Bosch JJ, Borsboom PC, Plasschaert AJ. A new method for matching tooth colors with color standard. J Dent Res 1985;64:837-841 https://doi.org/10.1177/00220345850640051101
  25. Jorgenson MW, Goodkind RJ. Spectrophotometric study of five porcelain shades relative to the dimensions of color, porcelain thickness, and repeated firings. J Prosthet Dent 1979;42:96-105 https://doi.org/10.1016/0022-3913(79)90335-4
  26. Seghi RR, Johnston WM, O'Brien WJ. Spectrophotometric analysis of color differences between porcelain systems. J Prosthet Dent 1986;56:35-40 https://doi.org/10.1016/0022-3913(86)90279-9
  27. Seghi RR, Hewlett ER, Kim J. Visual and instrumental colorimetric assessments of small color differences on translucent dental porcelain. J Dent Res. 1989; 68:1760-1764 https://doi.org/10.1177/00220345890680120801
  28. Seghi RR. Effects of instrument-measuring geometry on colorimetric assessments of dental porcelains. J Dent Res 1990; 69:1180-1183 https://doi.org/10.1177/00220345900690051101
  29. Lund TW, Schwabacher WB, Goodkind RJ. Spectrophotometric study of the relationship between body porcelain color and applied metallic oxide pigments. J Prosthet Dent 1985;53:790-796 https://doi.org/10.1016/0022-3913(85)90158-1
  30. Craig RG, Powers JM. Restorative dentral materials. 11th ed. St, Louis: Mosby, 2002;191
  31. Chon YJ, Cho SS. Color differences between resin composites before-and after-polymerization, and shade guides. J Korean Acad Conservatives 1999;24:299-309
  32. Esquivel JF, Chai J, Wozniak WT. Color stability of low-fusing porcelains for titanium. Int J Prosthodont 1995;8:479-85
  33. Douglas RD, Przybylska M. Predicting porcelain thickness required for dental shade matches. J Prosthet Dent 1999; 82:143-149 https://doi.org/10.1016/S0022-3913(99)70147-2