Abstract
The standard construction manual of the SDA(Separated Doughnut Auger) piling method was proposed so that the resisting capacity of the augered piles could work effectively. 405 dynamic pile load tests and 30 static pile load tests were performed for 265 test piles, which were installed by the SDA piling method in 33 sites in Korea. The results of the pile load tests showed that the end bearing capacity of the SDA augered piles depended on the property of various soil stratums and did not agree with ones estimated by the existing formula based on several standard design codes. On the basis of the pile load test results, four formulas were presented according to bearing stratums to estimate quantitatively the unit end bearing capacity of the SDA augered piles. The formulas for the unit end bearing capacity of piles on soils or weathered rocks were related to N-value given by SPT(Standard Penetration Test), while the unit end bearing capacity on bedrock was suggested to be more than 1500 $tf/m^2$. The presented formulas were compared with the existing formulas, which were presented by several standard design codes to design the augered piles. In order to use correctly the presented formulas, the quality of Standard Penetration Test should be controlled precisely. Also it is desirable to choose a pilot construction site, where both dynamic and static pile load tests are performed.
SDA매입말뚝의 지지성능이 잘 발휘될 수 있는 표준시공법에 대한 매뉴얼을 정리하여 제시하였다. 또한 전국 33개 현장에서 SDA매입공법으로 시공한265개 시험말뚝에 대하여 405회의 동재하시험과 30회의 정재하시험을 시행하였다. 말뚝재하시험 결과 SDA매입말뚝의 선단지지력은 지층의 조건에 따라 차이가 있었으며 여러 설계기준에 제시된 기존의 지지력 산정식으로 산정한 값과 차이가 있었다. 말뚝재하시험 결과에 근거하여 지지지반의 종류별로 SDA매입말뚝의 단위선단지지력을 정량적으로 계산할 수 있는 네 개의 식을 제안하였다. 토사층과 풍화암반에 지지되는 말뚝의 단위선단지지력은 표준관입시험의 N치와의 상관식으로 나타낼 수 있었으며, 기반암 위의 단위선단지지력은 1500 $tf/m^2$ 이상 되는 것으로 나타났다. 이들 제안식을 기존의 표준시방서에 제시되어 매입말뚝설계에 적용되는 기존의 식들과 비교 고찰하였다. 이들 제안식을 사용하기 위해서는 표준관입시험의 정밀도를 높여야하며, 현장에서 시험시공과 재하시험을 시행하는 것이 바람직하다.