Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

An Investigation of Acoustic Signal Characteristics in Turning of Aluminum

알루미늄 선삭공정에서 발생되는 음향 신호 특성

  • 김용연 (충북대학교 기계공학부) ;
  • 이창희 (충북대학교 대학원 정밀기계공학과)
  • Published : 2007.06.20
Download PDF
⟨ Previous Next ⟩

Abstract

This paper reports on the research which investigates acoustic signals acquired in turning with rough and finish simultaneously. The material is aluminum thin pipe. Two acousto-ultrasonic sensors were set on the finish and the rough bite of the CNC machine. It was first evaluated that one source was affected by the other. It was found that two signals were little affected each other, and that the acoustic signal from the finish bite was more related to the surface defects. Signals from the finish bite only were then analyzed in order to observe several types of surface defects. Second the fundamental experiments were accomplished to study the effects of machine vibration and material state. The signal characteristics due to surface defects were studied from the collected acoustic signals. The analysis was based on real time data, root mean squared average and frequency spectrum by fast fourier transform. As a result, the acoustic signals were made effects by machine condition, material structure. The acoustic signal from the finish bite was closely correlated with surface quality. Two types surface micro defects were then evaluated by the signal characteristics.

Keywords

References

  1. Lee, E. B. and Kim, J. D., 1993, 'A Study on the Prediction of Mirror-like Surface Generation by Frequency Analysis of Cutting Force and Simulation', Journal of KSME, Vol. 17, No.3, pp. 576-585
  2. Kim, J. D. and Lee E. B., 1993, 'A Study on the Modeling of Tool Motion and High Accuracy Surface Generation by Use of Cutting Force Signal', Journal of KSME, Vol. 17, No. 8, pp, 1951-1962
  3. Kwak, J. S. and Song, J. B., 2000, 'Estimation of the Ground Surface Roughness Applied by Acoustic Emission Signal', Journal of KSPE, Vol. 17, No.4, pp. 240-246
  4. Kim, J. D., Kim, S. R., Kim H. Y. and Ahn J. H., 2001, 'Development of Acoustic Emission Sensor Using Piezoelectric Elements and Monitoring System for Polishing Process', Journal of KSPE, pp, 560-565
  5. Kim, W. I. Wang, D, .H. and Kim, Y. S., 2002, 'Behaviors of Cutting Force and Acoustic Emission in Different Helix Angle End Milling', Journal of the Korean Society of Manufacturing Technology, Vol. 1, No. 1, pp. 15-22
  6. Ertekin, Y. M., Kwon, Y. G. and Tseng Tzu-Liang(Bill), 2003, 'Identification of Common Sensory Features for the Control of CNC Milling Operations under Varying Cutting Conditions', International Journal of Machine Tools & Manufacture, Vol. 43, pp. 897-904 https://doi.org/10.1016/S0890-6955(03)00087-7
  7. Dragos, A., Axinte, N. G., Kate, F. and Iker, U., 2004, 'Process Monitoring to Assist the Workpiece Surface Quality in Machining', International Journal of Machine Tools & Manufacture, Vol. 44, pp. 1091-1108 https://doi.org/10.1016/j.ijmachtools.2004.02.020
  8. Ganesan, R., Das, T. K., Sikder, A. K. and Kumar, A., 2003, 'Wavelet-based Identification of Delamination Defect in CMP(Cu-Low k) Using Nonstationary Acoustic Emission Signal', IEEE Transactions on Semiconductor Manufacturing, Vol. 16, No. 4, pp. 677-685 https://doi.org/10.1109/TSM.2003.818975
  9. Kwak, J. S. and Ha, M. K, 2002, 'Intelligent Diagnosis of Grinding State Using AE and Power Signals', Journal of the Korean Society for Power System Engineering, Vol. 6, No. 2, pp. 60-67
  10. Kwak, J. S. and Ha, M. K., 2004, 'Neural Network Approach for Diagnosis of Grinding Operation by Acoustic Emission and Power Signals', Journal of Materials Processing Technology, Vol. 147, pp. 65-71 https://doi.org/10.1016/j.jmatprotec.2003.11.016
  11. Godin, N., Huguet, S., Gaertner, R. and Salmon, L., 2004, 'Clustering of Acoustic Emission Signals Collected during Tensile Tests on Unidirectional Glass/Polyester Composite Using Supervised and Unsupervised Classifiers', NDT&E International, Vol. 37, pp. 253-264 https://doi.org/10.1016/j.ndteint.2003.09.010
  12. Lee, S. K., 1998, 'Fault Diagnosis in Gear Using Adaptive Signal Processing and Time Frequency Analysis', Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 8, No. 4, pp. 746-756