Steel and Composite Structures

  • 제7권2호
  • /
  • Pages.105-118
  • /
  • 2007
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Behaviour of lightweight composite trusses in fire - A case study

  • Choi, Seng-Kwan (Department of Fire and Engineering Service Research, Korea Institute of Construction Technology) ;
  • Burgess, Ian (Department of Civil and Structural Engineering, University of Sheffield) ;
  • Plank, Roger (School of Architecture, University of Sheffield)
  • 투고 : 2006.08.16
  • 심사 : 2006.12.15
  • 발행 : 2007.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

On September $11^{th}$ 2001, the twin towers of the World Trade Center in New York City were struck by two hijacked airplanes. Despite severe local damage induced by the impact, the towers were able to sustain 102 and 56 minutes of the subsequent multi-storey fires before collapsing. The purpose of this study is to contribute to the understanding of the in-fire performance of composite trusses by examining the behaviour of the longer-span type used in the towers. It makes no attempt to be a forensic study of the actual events. Using the finite element package Vulcan, the structural mechanics of typical long-span composite floor trusses are explained, under a variety of scenarios, as the fire temperatures rise. Different boundary conditions, degrees of protection and loading are all covered, the results being presented mainly in the form of graphs of deflection and internal force of members against time.

키워드

참고문헌

  1. American Society of Civil Engineering (1984), Finite Element Analysis of Reinforced Concrete, New York.
  2. Bailey, C.G. (1995),"Simulation of the structural behaviour of steel-framed buildings in fire", PhD thesis, University of Sheffield.
  3. Barzegar-Jamshidi, F. (1987),"Non-linear finite element analysis of reinforced concrete under short term monotonic loading", PhD thesis, University of Illinois at Urbana-Champaign, Ill.
  4. British Standards Institution (1990), BS.5950: Part8: Code of Practice for the Fire Protection of Structural Steelwork, UK.
  5. British Standards Institution (1996), BS.6399: Part1: Code of Practice for dead and imposed loads, UK.
  6. Cai, J. (2002),"Developments in modelling of composite building structures in fire", PhD thesis, University of Sheffield.
  7. Cai, J., Burgess, I.W., and Plank, R.J. (2003),"A generalised steel/reinforced beam-column element model for fire conditions", Eng. Struct., 25(6), 817-833. https://doi.org/10.1016/S0141-0296(03)00019-1
  8. Choi, S.K. (2005),"The structural behaviour of composite truss systems in fire", PhD thesis, University of Sheffield.
  9. European Committee for Standardisation (1991), ENV 1991-1-2: Eurocode 1: Actions on Structures. Part1.2: General Actions: Actions on Structures Exposed to Fire, Brussels, BE.
  10. European Committee for Standardisation (1993), ENV 1993-1-2: Eurocode 3: Design of Steel Structures. Part1.2: General Rules: Structural Design for Fire, Brussels, BE.
  11. European Committee for Standardisation (1994), ENV 1994-1-2: Eurocode 4: Design of Composite Steel and Concrete Structures. Part 1.2: General Rules: Structural Fire Design, Brussels, BE.
  12. Federal Emergency Management Agency (2002), World Trade Center Building Performance Study: Data Collection, Preliminary Observations and Data Collections, Washington, DC.
  13. Fitzpatrick, T., Crane, R. and Rajii, A. (2002),"A briefing on the World Trade Center attacks", Fire Protection Engineering, 13(Winter).
  14. Huang, Z., Platten, A. and Roberts, J. (1996),"Non-linear finite element model to predict temperature histories within reinforced concrete in fires", Build. Environ., 31(2), 109-118. https://doi.org/10.1016/0360-1323(95)00041-0
  15. Huang, Z. and Plattern, A. (1997),"Nonlinear finite element analysis of planar reinforce concrete members subjected to fire", ACI Struct. J., 94(3), 272-282.
  16. Huang, Z., Burgess, I.W. and Plank, R.J. (2003),"Modelling membrane action of concrete slabs in composite buildings in fire I: Theoretical development", ASCE J. Struct. Eng., 129a(8), 1093-1102.
  17. Huang, Z., Burgess, I.W. and Plank, R.J. (2003),"Modelling membrane action of concrete slabs in composite buildings in fire II: Validations", ASCE J. Struct. Eng., 129b(8): 1103-1112.
  18. International Organization for Standardization (1975), ISO834: Fire resistance tests - Elements of building construction, Geneva.
  19. Milke, J. (2003),"Study of building performance in the WTC disaster", Fire Protection Engineering, 18(Spring).
  20. Najjar, S.R. (1994),"Three dimensional analysis of steel frames and sub-frames in fire", PhD thesis, University of Sheffield.
  21. Neville, A.M. (1998), Properties of Concrete 4th edition, Addition Wesley Longman Limited.
  22. Purkiss, J.A. (1996), Fire Safety Engineering Design of Structures, Butterworth & Heinemann, Oxford, UK.
  23. Ranby, A., Inha, T. and Myllymaki, J. (2000), Structural Steel Fire Design, SBI Publication 134, Sweden.
  24. Rots, J.G., Kusters, G.M.A. and Blaauwendraad, J. (1984),"The need for fracture mechanics options in finite element models for concrete structures", Proc. Int. Conf. on Computer Aided Analysis and Design of Concrete Structures Part1, Damjanic et al., eds., Pineridge Press, 19-32.
  25. Shepherd, P. (1999),"The performance in fire of restrained columns in steel-framed construction", PhD Thesis, University of Sheffield.

피인용 문헌

  1. Performance in fire of long-span composite truss systems vol.30, pp.3, 2008, https://doi.org/10.1016/j.engstruct.2007.05.016
  2. An Experimental Research on the Fire Behavior of Composite Truss Structure Used at World Trade Center vol.82, pp.1662-7482, 2011, https://doi.org/10.4028/www.scientific.net/AMM.82.356