DOI QR코드

DOI QR Code

Design of supplemental viscous dampers in inelastic SDOF system based on improved capacity spectrum method

  • Li, Bo (College of Civil Engineering, Chang'an University) ;
  • Liang, Xing-Wen (College of Civil Engineering, Xi'an University of Architecture and Technology)
  • 투고 : 2006.03.31
  • 심사 : 2007.08.01
  • 발행 : 2007.11.30

초록

A simplified yet effective design procedure for viscous dampers was presented based on improved capacity spectrum method in the context of performance-based seismic design. The amount of added viscous damping required to meet a given performance objective was evaluated from the difference between the total demand for effective damping and inherent damping plus equivalent damping resulting from hysteretic deformation of system. Application of the method is illustrated by means of two examples, using Chinese design response spectrum and mean response spectrum. Nonlinear dynamic analysis results indicate that the maximum displacements of structures installed with supplemental dampers designed in accordance with the proposed method agree well with the given target displacements. The advantage of the presented procedure over the conventional iterative design method is also highlighted.

키워드

참고문헌

  1. ATC. (1996), Applied Technology Council. Seismic Evaluation and Retrofit of Concrete Buildings, ATC-40, Redwood City, California
  2. Building Seismic Safety Council (BSSC), (2001), NEHRP Recommended Provisions for Seismic Regulations for New Building and Other Structures, 2000 Edition, Report Nos. FEMA-368 and FEMA-369, Federal Emergency Management Agency, Washington, D.C
  3. Building Seismic Safety Council (BSSC), (2003), NEHRP Recommended Provisions for Seismic Regulations for New Building and Other Structures, 2003 Edition, Report Nos. FEMA-450, Federal Emergency Management Agency, Washington, D.C
  4. Chopra, A.K. (2001), Dynamics of Structures: Theory and Applications to Earthquake Engineering, Prentice Hall: New Jersey
  5. Chopra, A.K. and Goel, R.K. (2000), 'Evaluation of NSP to estimate seismic deformation: SDF system', J. Struct. Eng., 126(4), 482-490 https://doi.org/10.1061/(ASCE)0733-9445(2000)126:4(482)
  6. Constantinou, M.C., Soong, T.T. and Dargush, G.F. (1998), Passive Energy Dissipation Systems for Structural Design and Retrofit, Monograph Series No. 1, Multidisciplinary Center for Earthquake Engineering Research (MCEER), State University of New York at Buffalo, Buffalo, N.Y
  7. Fajfar, P. (1999), 'Capacity spectrum method based on inelastic demand spectra', Earthq. Eng. Struct. Dyn., 28, 979-993 https://doi.org/10.1002/(SICI)1096-9845(199909)28:9<979::AID-EQE850>3.0.CO;2-1
  8. Federal Emergency Management Agency (FEMA) (2000), Prestandard and Commentary for the Seismic Rehabilitation of Buildings. FEMA-356, Washington, D.C
  9. Federal Emergency Management Agency (FEMA) (2005), Improve Nonlinear Static Seismic Analysis Procedures, FEMA-440, Washington, D.C
  10. FEMA-273 (1997), Federal Emergency Management Agency, NEHRP Guidelines for the Seismic Rehabilitation of Buildings, Washington, D.C
  11. FEMA-274 (1997), Federal Emergency Management Agency, NEHRP Commentary on the Guidelines for the seismic rehabilitation of buildings, Washington, D.C
  12. Guyader, A.C. and Iwan, W.D. (2004), A Statistical Approach to Equivalent Linearization with Application to Performance-based Engineering. Technical Report, EERL 2004-04. California Institute of Technology, 2004
  13. Hanson, R.D. and Soong, T.T. (2001), Seismic Design with Supplemental Energy Dissipation Devices, Monograph No.8, Earthquake Engineering Research Institute (EERI), Oakland, CA
  14. Kim, J.K. and Choi, H.H. (2006), 'Displacement-based design of supplemental dampers for seismic retrofit of a framed structure', J. Struct. Eng., 132(6), 873-883 https://doi.org/10.1061/(ASCE)0733-9445(2006)132:6(873)
  15. Kim, J.K., Choi, H.H. and Min, K.W. (2003), 'Performance-based design of added viscous dampers using capacity spectrum method', J. Earthq. Eng., 7(1), 1-24
  16. Kowalsky, M.J., Priestley, M.J.N. and MacRae, G.A. (1994), Displacement-based Design, a Methodology for Seismic Design Applied to SDOF Reinforced Concrete Structures. Report No. SSRP-94/16, Structural System Research Project, University of California, San Diego, La Jolla, CA, 1994
  17. Lin, Y.Y. and Chang, K.C. (2003), 'An improved capacity spectrum method for ATC-40', Earthq. Eng. Struct. Dyn., 32, 2013-2025 https://doi.org/10.1002/eqe.312
  18. Lin, Y.Y., Chang, K.C. and Wang, Y.L. (2004), 'Comparison of displacement coefficient method and capacity spectrum method with experimental results of RC columns', Earthq. Eng. Struct. Dyn., 33, 35-48 https://doi.org/10.1002/eqe.336
  19. Lin, Y.Y., Tsai, M.H., Hwang, J.S. and Chang, K.C. (2003), 'Direct displacement-based design for building with passive energy dissipation systems', J. Eng. Struct., 25(1), 25-37 https://doi.org/10.1016/S0141-0296(02)00099-8
  20. Ministry of Construction (2001), Code for Seismic Design of Buildings, GB50011-2001. China Architecture & Building Press. (in Chinese)
  21. Ramirez, O.M., Constantinou, M.C., Kircher, C.A., Whittaker, A.S., Johnson, M.W., Gomez, J.D. and Chrysostomou, C.Z. (2001), Development and Evaluation of Simplified Procedure for Analysis and Design of Buildings with Passive Energy Dissipation Systems. Technical Report MCEER-00-0010, Revision 1, Multidisciplinary Center for Earthquake Engineering Research (MCEER), State University of New York at Buffalo, Buffalo, N.Y
  22. Soong, T.T. and Dargush, G.P. (1997), Passive Energy Dissipation Systems in Structural Engineering, John Wiley & Sons Ltd., London, UK and New York, USA
  23. Tsopelas, P., Constantinou, M.C., Kircher, C.A. and Whittaker, A.S. (1997), Evaluation of Simplified Method of Analysis for Yielding Structures, Technical Report NCEER-97-0012, National Center for Earthquake Engineering Research, State University of New York at Buffalo

피인용 문헌

  1. A methodology for design of metallic dampers in retrofit of earthquake-damaged frame vol.56, pp.4, 2015, https://doi.org/10.12989/sem.2015.56.4.569
  2. Experimentally validated FEA models of HF2V damage free steel connections for use in full structural analyses vol.37, pp.4, 2007, https://doi.org/10.12989/sem.2011.37.4.385
  3. A simplified design procedure for seismic retrofit of earthquake-damaged RC frames with viscous dampers vol.44, pp.5, 2007, https://doi.org/10.12989/sem.2012.44.5.611
  4. Seismic Performance Evaluation of Steel Buildings with Oil Dampers Using Capacity Spectrum Method vol.11, pp.6, 2007, https://doi.org/10.3390/app11062687