DOI QR코드

DOI QR Code

Repair of precracked RC rectangular shear beams using CFRP strip technique

  • Received : 2005.08.10
  • Accepted : 2007.04.04
  • Published : 2007.07.10

Abstract

The exploitation of fibre reinforced polymer composites, as external reinforcement is an evergreen and well-known technique for improving the structural performance of reinforced concrete structures. The demand to use FRP composites in the civil engineering industry is mainly due to its high strength, light weight, and stiffness. This paper exemplifies the shear strength of partially precracked reinforced concrete rectangular beams repaired with externally bonded Bi-Directional Carbon Fibre Reinforced Polymer (CFRP) Fabrics strips. All specimens were cast in the laboratory environment without any internal shear reinforcement. The test parameters were longitudinal tensile reinforcement, shear span to effective depth ratio, spacing of CFRP strips, and orientation of CFRP reinforcement. It mainly focuses on the shear capacity and modes of failure of the CFRP strengthened shear beams. Results have shown that the CFRP repaired beams attained a shear enhancement of 32% and 107.64% greater than the control beams. This study underscores that the CFRP strip technique significantly enhanced the shear capacity of precracked reinforced concrete rectangular beams without any internal shear reinforcement.

Keywords

References

  1. Adhikary, R.B., Mutsuyoshi, H. and Sano, M. (2000), 'Shear strengthening of reinforced concrete beams using steel plates bonded on beam web: experimental and analysis', Constr. Build Mater., 14, 237-244 https://doi.org/10.1016/S0950-0618(00)00023-4
  2. Al-Mahaidi, R., Lee, K. and Taplin, G. (2001), 'Behaviour and analysis of RC T-beams partially damaged in shear and repaired with CFRP laminates', Structures Congress, ASCE Washington DC
  3. Chajes, M.J., Thomson, T.A. and Tarantino, R. (1995a), 'Reinforcement of concrete structures using externally bonded composite materials', Non-metallic (FRP) Reinforcement for Concrete Structures, ed L Taerwe, E & FN Span, London, 501-508
  4. Chajes, M.J., Januszka, E, Mertz, D.R., Thomson, T.A. and Finch, W.W. (1995b), 'Shear strengthening of reinforced concrete beams using externally applied composite fabrics', ACI Struct. J., 9(3), 295-303
  5. Chen, J.F. and Teng, J.G. (2001), 'A shear strength model for FRP strengthened RC beams', Proc. of the Fifth Int. Conf. on Fibre Reinforced Plastics for Reinforced Concrete Structures (FRPRCS-5), 1, 205-214
  6. El-Hacha, R., Wight, G. and Green, M. (2001), 'Prestressed CFRP sheets for strengthening concrete beams at room and low temperatures: Experimental and analytical investigations', Proc. of the Fifth Int. Conf. on Fibre Reinforced Plastics for Reinforced Concrete Strcutures (FRPRCS-5), Cambridge, UK, 1, 261-270
  7. Hussain, M., Sharif, A., Basunbul, I.A, Baluch, M.H. and Al-Sulaimani, G.J. (1995), 'Flexural behaviour of precracked reinforced concrete beams strengthened externally by steel plates', ACI J., 92(1), 14-22
  8. Imran, I., Simatupang, P.H., Peornomo, S. and Tan, G. (2003), 'Experimental study on the shear strengthened RI C beams wrapped with aramid fibre sheet', Proc. of the 5th Asia-Pacific Structural Engineering and Construction Conf. (APSEC 2003), 233-241
  9. Jayaprakash, J., Abdul Aziz, A.A., Abang, A.A.A. and Ashrabov, A.A. (2004a), 'External shear strengthening strategies of RC beams with Bi-directional carbon fibre reinforced polymer sheet', Proc. of Int. Conf. on Bridge and Hydraulic structures, 219-224
  10. Jayaprakash, J., Abdul Aziz, A.A., Abang, A.A.A. and Ashrabov, A.A. (2004b), 'Rehabilitation of RC beams using Bi-directional carbon fibre reinforced polymer fabrics', The Third Int. Conf. on Advances in Structural Engineering and Mechanics (ASEM'04), 2-4 September 2004, Seoul, Korea
  11. Jayaprakash, J., Abdul Aziz, A.A., Abang, A.A.A. and Ashrabov, A.A. (2005), 'An experimental investigation on shear enhancement of partially cracked RC beams with Bi directional carbon fabrics', Sixth Int. Congress, Global Construction-Ultimate Concrete Opportunities, 5-7, July 2005, UK
  12. Khalifa, A. and Nanni, A. (2000), 'Improving shear capacity of existing RC T-section beams using CFRP composites', Cement Concrete Comp., 22(2), 165-174 https://doi.org/10.1016/S0958-9465(99)00051-7
  13. Khalifa, A. and Nanni, A. (2002), 'Rehabilitation of rectangular simply supported RC beams with shear deficiencies using CFRP composites', Constr. Build. Mater., 16, 135-146 https://doi.org/10.1016/S0950-0618(02)00002-8
  14. Khalifa, A., Belarbi, A and Nanni, A. (2000), 'Shear performance of RC members strengthened with externally bonded FRP wraps', Proc. of 12th World Conf. on Earthquake Engineering, Auckland, New Zealand, paper 305
  15. Norris, T., Saadatmanesh, H. and Ehsani, M.R. (1997), 'Shear and flexural strengthening of RIC beams with carbon fibre sheets', J. Struct. Eng., 123(7), 903-911 https://doi.org/10.1061/(ASCE)0733-9445(1997)123:7(903)
  16. Raghu, H.A., Myers, J.J. and Nanni, A. (2001), 'Shear performance of RC beams strengthened in situ with composites', University of Missouri, Rolla. Report No. CIES 99-11
  17. Saadatmanesh, H. and Ehsani, M.R. (1991), 'RC beams strengthened with GFRP plates I: Experimental study', J Struct. Eng., 117(11), 3417-3433 https://doi.org/10.1061/(ASCE)0733-9445(1991)117:11(3417)

Cited by

  1. Embedded Connector in Severe Optimization of Steel Plate for Shear Strengthening of RC Beam: Experimental and Numerical Investigations vol.2018, pp.1687-8094, 2018, https://doi.org/10.1155/2018/4721431
  2. Finite element analysis of shear-deficient RC beams strengthened with CFRP strips/sheets vol.30, pp.2, 2008, https://doi.org/10.12989/sem.2008.30.2.247
  3. Experimental investigation on CFRP-to-concrete bonded joints across crack vol.35, pp.1, 2007, https://doi.org/10.12989/sem.2010.35.1.001
  4. U-Jacketing Applications of Fiber-Reinforced Polymers in Reinforced Concrete T-Beams against Shear-Tests and Design vol.8, pp.2, 2020, https://doi.org/10.3390/fib8020013