Structural Engineering and Mechanics

  • 제25권5호
  • /
  • Pages.541-564
  • /
  • 2007
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Energy balance and power demand assessment of actuators in base isolated structures supplemented with modified bang-bang control

  • Sebastianelli, Robert R. Jr. (Department of Civil and Environmental Engineering, and Institute for Systems Research, University of Maryland) ;
  • Austin, Mark A. (Department of Civil and Environmental Engineering, and Institute for Systems Research, University of Maryland)
  • 투고 : 2005.10.12
  • 심사 : 2006.09.19
  • 발행 : 2007.03.30
⟨ 이전 논문 다음 논문 ⟩

초록

키워드

참고문헌

  1. American Association of State Highway and Transportation Officials (AASHTO) (1991), Guide Specifications for Seismic Design
  2. Andriono, T. and Carr, A.J. (1991a), 'Reduction and distribution of lateral seismic forces on base isolated mutlistorey structures', Bulletin the New Zealand National Society Earthq. Eng, 24(3), 225-237
  3. Andriono, T. and Carr, A.J. (1991b), 'A simplified earthquake resistant design method for base isolated multistorey buildings', Bulletin the New Zealand National Society Earthq. Eng, 24(3), 238-250
  4. Arias, A. (1970), A Measure of Earthquake Intensity in Seismic Design for Nuclear Power Plants, MIT Press
  5. Austin, M.A., Pister, K.S. and Mahin, S.A. (1987), 'A methodology for the probabilistic limit states design of earthquake resistant structures', J. Struct. Div., ASCE, 113(8), 1642-1659 https://doi.org/10.1061/(ASCE)0733-9445(1987)113:8(1642)
  6. Austin, M.A, Chen, X.G and Lin, W.J. (1995), 'Aladdin: A computational toolkit for interactive engineering matrix and finite element analysis', Technical Research Report TR 95-74, Institute for Systems Research, University of Maryland, College Park, MD 20742
  7. Austin, M.A., Lin, W.J. and Chen, X.G (2000), 'Structural matrix computations with units', J. Comput. Civil Eng, ASCE, 14(3), July 2000,174-182 https://doi.org/10.1061/(ASCE)0887-3801(2000)14:3(174)
  8. Austin, M.A and Lin, W.J. (2003), 'Energy-balance assessment of isolated structures', J. Eng Mech., ASCE, 130(3), 347-358 https://doi.org/10.1061/(ASCE)0733-9399(2004)130:3(347)
  9. Bellman, R., Glicksberg, I. and Gross, O. (1956), 'On the bang-bang control problem', Quarterly Applied Math., 14(1), 11-18 https://doi.org/10.1090/qam/78516
  10. Connor, J.J. (2003), Introduction to Structural Motion Control, Pearson Education Inc
  11. Dorey, A.P. and Moore, J.H. (1996), Advances in Actuators, Institute of Physics Publishing, Bristol, England.
  12. Earthquake Engineering Research Center, UC Berkeley (2004), Pacific Earthquake Engineering Research (PEER) Strong Motion Database, See http://peer.berkeley.edu/smcat/index.html
  13. Ghobarah, A. and Ali, H.M. (1990), 'Seismic design of base-isolated highway bridges utilizing lead-rubber bearings', Canadian J Civil Eng., 17,413-422 https://doi.org/10.1139/l90-045
  14. Hall, J.F, Heaton, T.H., Halling, M.W and Wald, D.J. (1995), 'Near-source ground motion and its effects on flexible buildings', Earthq. Spectra, 11(4), 569-605 https://doi.org/10.1193/1.1585828
  15. Heaton, T.H., Hall, J.F, Wald, D.J. and Halling, M.W (1995), 'Response of high-rise and base-isolated buildings in ahypothetical Mw 7.0 blind thrust earthquake', Science, 267
  16. Housner, G.W. and Bergman, L.A. et al. (1997), 'Structural control: Past, present, and future', J. Eng. Mech., 123(9), 897-971 https://doi.org/10.1061/(ASCE)0733-9399(1997)123:9(897)
  17. International Conference of Building Officials (ICBO) (1997), Earthquake Regulations for Seismic-Isolated Structures: Appendix Chapter 16, Whittier, California
  18. Johnson, E.A., Ramallo, J.C., Spencer, RE, Jr. and Sain, M.K(1998), 'Intelligent base isolation systems', Proc. of the Second World Conf. on Structural Control
  19. Kailaith, T. (1980), Linear Systems, Prentice-Hall, London
  20. Kelly, J.M. and Tsai, H. (1984), 'Seismic response of light internal equipment in base isolated structures', Report No. UCB/SESM-84/17, Department of Structural Engineering and Structural Mechanics, University of California, Berkeley, CA
  21. Kelly, J.M., Leitmann, G. and Soldatos, A.G. (1987), 'Robust control of base-isolated structures under earthquake excitation', J. Optimization Theory Appl., 53(2), 159-180 https://doi.org/10.1007/BF00939213
  22. Lin, W.J. (1997), 'Modem computational environments for seismic analysis of highway bridge structures', Doctoral Dissertation, Department of Civil Engineering, University of Maryland, College Park, MD 20742
  23. Mayes, R.L., Buckle, I.G, Kelly, T.R. and Jones, L. (1992), 'AASHTO seismic isolation design requirements for highway bridges', J. Struct. Div., ASCE, 118(1), 284-304 https://doi.org/10.1061/(ASCE)0733-9445(1992)118:1(284)
  24. Naeim, F. and Kelly, J. (1998), Design ofSeismic Isolated Structures. John Wiley and Sons
  25. Park, J. and Otsuka, H. (1999), 'Optimal yield level of bilinear seismic isolation devices', Earthq. Eng. Struct. Dyn.,28
  26. Ramallo, J.C., Johnson, E.A. and Spencer, B.F, Jr. (2002), 'Smart base isolation systems', J. Eng. Mech., ASCE, 128(10), 1088-1099 https://doi.org/10.1061/(ASCE)0733-9399(2002)128:10(1088)
  27. Reinhorn, A.M., Soong, T.T and Wen, C.Y. (1987), 'Base-isolated structures with active control', Proc. of Pressure Vessels and Piping (PVP) Conf, Vol. PVP-127, 413-420
  28. Sebastianelli, R. and Austin, M.A. (2005), 'Computational assessment of suboptimal bang-bang control strategies for performance-based design of base isolated structures', ISR Technical Report 2005-89, Institute for Systems Research, University of Maryland, College Park, MD, p. 72
  29. Skinner, R.I., Robinson, W.H. and McVerry, G.H. (1993), An Introduction to Seismic Isolation. Wiley Publishing, Chichester, England
  30. Spencer, B.F, Jr. and Nagarajaiah, S. (2003), 'State of the art of structural control', J. Struct. Eng., ASCE, 845-856
  31. Turkington, D.H., Carr, A.J., Cooke, N. and Moss, P.J. (1989a), 'Seismic design of bridges on lead-rubber bearings', J. Struct. Div., ASCE, 115(12),3000-3016 https://doi.org/10.1061/(ASCE)0733-9445(1989)115:12(3000)
  32. Turkington, D.H., Carr, A.J., Cooke, N. and Moss, P.J. (1989b), 'Design method for bridges on lead-rubber bearings', J. Struct. Div., ASCE, 115(12), 3017-3030 https://doi.org/10.1061/(ASCE)0733-9445(1989)115:12(3017)
  33. Vision 2000 Committee, Performance Based Seismic Engineering of Buildings (1995), Volume 1: Interim Recommendations and Conceptual Framework, Structural Engineers Association of California
  34. Wang, Y.P. and Liu, C.J. (1994), 'Active control of base-isolated structures under strong earthquakes', Proceeding of the Fifth USA National Conference on Earthquake Engineering, Vol. 1. Chicago, July 10-14
  35. Wonham, W.M. and Johnson, C.D. (1964), 'Optimmal bang-bang control with quadratic performance index', J. Basic Eng., 86, 107-115 https://doi.org/10.1115/1.3653092
  36. Wu, Z. and Soong, T.T (1996), 'Modified bang-bang control law for structural control implementation', J. Eng. Mech., ASCE, 122(8), 771-777 https://doi.org/10.1061/(ASCE)0733-9399(1996)122:8(771)
  37. Yoshioka, H., Ramallo, J.C. and Spencer, B.F, Jr. (2002), 'Smart base isolation strategies employing magnetorheological dampers', J. Eng. Mech., ASCE, 128(5), 540-551 https://doi.org/10.1061/(ASCE)0733-9399(2002)128:5(540)