과제정보
연구 과제 주관 기관 : 교량설계핵심기술연구단
참고문헌
- 건설교통부 (2001) 국가교통DB-교통수요분석
- 건설교통부 (2005) 도로교설계기준, 한국도로교통협회
- 박민석, 배두병, 황희승 (2001) 고속도로 교량 활하중 정형화에 관한 연구, 한국도로공사 연구보고서, 도로연 01-26
- 박영석, 심낙훈 (2000) 도로교의 피로하중모형에 관한 연구, 대한토목학회논문집, 제 20권, 5A호, pp. 715-724
- 배두병, 정경섭, 조재병, 황의승 (1996) 강형교의 교통량 분석을 통한 설계 피로하중산정과 발생응력의 모형화 연구, 한국강 구조학회 보고서
- 배두병, 황희승 (2004) 강교량 설계를 위한 피로하중모형, 대한토목학회논문집, 제24권, 1A호, pp. 225-232
- 신동구, 박영석, 정태주 (2005) 신뢰도 기반 동적하중허용계수의 보정, 대한토목학회논문집, 제25권, 3A호, pp. 545-553
- AASHTO (1996) Standard Specifications for Highway Bridges(16th Ed.)
- AASHTO (2004) AASHTO LRFD Bridge Design Specifications
- BS5400 (1985) Steel, concrete and composite bridges, Part 2 Specification for Loads, British Standards Institution, London, United Kingdom
- CSA (2000) Canadian Highway Bridge Design Code, CAN/CAS-S6-00, Canadian Standards Association International, Toronto, Ontario, Canada
- ENV (1994) Eurocode 4: Design of Composite Steel and Concrete Structures-Part2: Rules for Bridges, European Committee for Standardization, Brussels
- Keating, P. B., and Fisher, J. W. (1985) Review of fatigue tests and design criteria on welded details, Fritz Engrg. Lab. Report 488-I(85), Lehigh Univ., Bethlehem, Penn
- Laman, J. A. (1995) Fatigue load models for girder bridges, Ph.D Thesis, Univ. of Michigan, Ann Arbor, Michigan, USA
- Miner, M. A. (1945) Cumulative damage in fatigue, J. Appl. Mech., Trans. ASME, Vol. 67, pp. A159
- Moses, F., and Ghosn, M. (1983) Weighing trucks-inmotion for highway bridge loads, Final Report, Ohio Department of Transportation, USA
- Moses, F., Schilling, C. G., and Raju, S. K. (1988). Fatigue evaluation procedures for steel bridge, NCHRP 299 Transp. Res. Board, Washington, D.C., USA
- Nyman, W.E. and Moses, F. (1985) Calibration of bridge fatigue design model, J. Struc. Eng., ASCE, 111(6), pp. 1251-1266 https://doi.org/10.1061/(ASCE)0733-9445(1985)111:6(1251)
- OHBDC (1981) Ontario Highway Bridge Design Code, Ontario Ministry of Transportation and Communication, Downsview, Ontario, Canada
- Pavia, A., (1975) Reliability approach to fatigue design of highway bridges, Ph. D Thesis, Case Western Reserve University, Cleveland, Ohio, USA
- Rackwitz, R. and Fiessler, B. (1978) Structural reliability under combined random load sequences, Computers and Structures, Vol. 9, pp. 489-494 https://doi.org/10.1016/0045-7949(78)90046-9
- Raju, S. K., Moses. F. and Schilling, C. G. (1990) Reliability calibration of fatigue evaluation and design procedures, J. Struc. Eng., ASCE, 116(5), pp. 1356-1369 https://doi.org/10.1061/(ASCE)0733-9445(1990)116:5(1356)
- Schilling, C. G. and Klippstein, K. H. (1977) Fatigue of steel beams by simulated bridge traffic, J. Struc. Eng., ASCE, 103(8), pp. 425-438
- Schilling, C. G. (1982) Lateral-distribution factors for fatigue design, J. Struc. Eng., ASCE, 108(9), pp. 2015-2033
- Schilling, C. G. (1984) Stress cycles for fatigue design of steel bridges, J. Struc. Eng., ASCE, 110(6), pp. 1222-1234 https://doi.org/10.1061/(ASCE)0733-9445(1984)110:6(1222)
- Synder, R. E., Likins, G. E. and Moses, F. (1985) Loading spectrum experienced by bridge structures in the United States, Report FHWA/RD-85/012, USA