Journal of Korean Society of Steel Construction (한국강구조학회 논문집)

Korean Society of Steel Construction (한국강구조학회)
권호 표지

Reliability Analysis of Fatigue Truck Model Using Measured Truck Traffic Statistics

통행차량 특성을 반영한 강교량 피로설계트럭의 피로파괴 신뢰도해석

  • 신동구 (명지대학교 토목환경공학과) ;
  • 권태형 (명지대학교 토목환경공학과) ;
  • 박영석 (명지대학교 토목환경공학과)
  • Received : 2006.09.14
  • Accepted : 2007.03.02
  • Published : 2007.04.27
Download PDF
⟨ Previous Next ⟩

Abstract

A structural reliability analysis of fatigue truck model for fatigue failure of highway steel bridges was performed by applying the Miner's fatigue damage rule expressed as a function of various random variables affecting fatigue damage. Among the variables, the statistical parameters for equivalent moment, impact factor, and loadometer were obtained by analyzing recently measured domestic traffic data, whereas the parameters on fatigue strength, girder distribution factor, and headway factor of the measured data available in the literature were used. The effects of various fatigue truck models, fatigue life, ADTT, fatigue detail category, loadometer, and gross vehicle weight of fatigue truck on the reliability index of fatigue damage were analyzed. It is expected that the analytical results presented herein can be used as a basic background material in the calibration of both fatigue design truck and fatigue load factor of LRFD specification.

교량의 피로파괴에 대한 Miner의 피로손상법칙을 적용하여 여러 확률변수로 표현된 피로파괴 한계상태함수에 대한 신뢰도해석을 국내에서 측정된 통행차량의 통계적 특성을 반영하여 수행하였다. 신뢰도지수의 산정에 필요한 확률변수 가운데 등가모멘트, 충격계수비, 등가하중비는 국내의 최근 측정자료를 분석하여 통계치를 산정하였으며, 피로강도, 활하중 횡분배비, 연행하중비는 국외에서 측정된 문헌자료의 통계치를 적용하였다. 신뢰도해석을 통하여 피로설계트럭의 종류, 교량수명, ADTT, 피로상세, 등가하중비, 피로설계트럭의 총중량 등의 피로손상에 관련된 여러 파라미터가 신뢰도지수에 미치는 영향을 분석하였다. 본 논문의 피로파괴에 대한 신뢰도해석 결과는 국내 LRFD 설계기준의 피로설계트럭모형과 피로한계상태의 하중계수를 결정할 때 기초 자료로 이용할 수 있을 것으로 판단된다.

Keywords

Acknowledgement

Supported by : 교량설계핵심기술연구단

References

  1. 건설교통부 (2001) 국가교통DB-교통수요분석
  2. 건설교통부 (2005) 도로교설계기준, 한국도로교통협회
  3. 박민석, 배두병, 황희승 (2001) 고속도로 교량 활하중 정형화에 관한 연구, 한국도로공사 연구보고서, 도로연 01-26
  4. 박영석, 심낙훈 (2000) 도로교의 피로하중모형에 관한 연구, 대한토목학회논문집, 제 20권, 5A호, pp. 715-724
  5. 배두병, 정경섭, 조재병, 황의승 (1996) 강형교의 교통량 분석을 통한 설계 피로하중산정과 발생응력의 모형화 연구, 한국강 구조학회 보고서
  6. 배두병, 황희승 (2004) 강교량 설계를 위한 피로하중모형, 대한토목학회논문집, 제24권, 1A호, pp. 225-232
  7. 신동구, 박영석, 정태주 (2005) 신뢰도 기반 동적하중허용계수의 보정, 대한토목학회논문집, 제25권, 3A호, pp. 545-553
  8. AASHTO (1996) Standard Specifications for Highway Bridges(16th Ed.)
  9. AASHTO (2004) AASHTO LRFD Bridge Design Specifications
  10. BS5400 (1985) Steel, concrete and composite bridges, Part 2 Specification for Loads, British Standards Institution, London, United Kingdom
  11. CSA (2000) Canadian Highway Bridge Design Code, CAN/CAS-S6-00, Canadian Standards Association International, Toronto, Ontario, Canada
  12. ENV (1994) Eurocode 4: Design of Composite Steel and Concrete Structures-Part2: Rules for Bridges, European Committee for Standardization, Brussels
  13. Keating, P. B., and Fisher, J. W. (1985) Review of fatigue tests and design criteria on welded details, Fritz Engrg. Lab. Report 488-I(85), Lehigh Univ., Bethlehem, Penn
  14. Laman, J. A. (1995) Fatigue load models for girder bridges, Ph.D Thesis, Univ. of Michigan, Ann Arbor, Michigan, USA
  15. Miner, M. A. (1945) Cumulative damage in fatigue, J. Appl. Mech., Trans. ASME, Vol. 67, pp. A159
  16. Moses, F., and Ghosn, M. (1983) Weighing trucks-inmotion for highway bridge loads, Final Report, Ohio Department of Transportation, USA
  17. Moses, F., Schilling, C. G., and Raju, S. K. (1988). Fatigue evaluation procedures for steel bridge, NCHRP 299 Transp. Res. Board, Washington, D.C., USA
  18. Nyman, W.E. and Moses, F. (1985) Calibration of bridge fatigue design model, J. Struc. Eng., ASCE, 111(6), pp. 1251-1266 https://doi.org/10.1061/(ASCE)0733-9445(1985)111:6(1251)
  19. OHBDC (1981) Ontario Highway Bridge Design Code, Ontario Ministry of Transportation and Communication, Downsview, Ontario, Canada
  20. Pavia, A., (1975) Reliability approach to fatigue design of highway bridges, Ph. D Thesis, Case Western Reserve University, Cleveland, Ohio, USA
  21. Rackwitz, R. and Fiessler, B. (1978) Structural reliability under combined random load sequences, Computers and Structures, Vol. 9, pp. 489-494 https://doi.org/10.1016/0045-7949(78)90046-9
  22. Raju, S. K., Moses. F. and Schilling, C. G. (1990) Reliability calibration of fatigue evaluation and design procedures, J. Struc. Eng., ASCE, 116(5), pp. 1356-1369 https://doi.org/10.1061/(ASCE)0733-9445(1990)116:5(1356)
  23. Schilling, C. G. and Klippstein, K. H. (1977) Fatigue of steel beams by simulated bridge traffic, J. Struc. Eng., ASCE, 103(8), pp. 425-438
  24. Schilling, C. G. (1982) Lateral-distribution factors for fatigue design, J. Struc. Eng., ASCE, 108(9), pp. 2015-2033
  25. Schilling, C. G. (1984) Stress cycles for fatigue design of steel bridges, J. Struc. Eng., ASCE, 110(6), pp. 1222-1234 https://doi.org/10.1061/(ASCE)0733-9445(1984)110:6(1222)
  26. Synder, R. E., Likins, G. E. and Moses, F. (1985) Loading spectrum experienced by bridge structures in the United States, Report FHWA/RD-85/012, USA