References
- Mobasher, B. and Li, C. Y, 'Effect ofInterfacial Properties on the Crack Propagation in Cementitious Composites', Advancecd Cement Based Materials, No.4, 1996, pp.93-105
- U, C. Y, Wang, Y, and Backer, S., 'Effect of Fiber-Matrix Bond Strength on the CrackResistance of SyntheticFiberReinforcedCementitious Composites', MaterialsResearchand Society Symposium, Proceeding, No.114, 1988, pp.167-173
- Bentur, A. and Mindess, S., Fibre Reinforced Cementitious Composites, Elsevier Applied Science, London, 1990, pp.1-11
- Shannag, M. J., Brinker, R., and Hansen, W., 'Pullout Behavior of Steel Fibers from Cement-Based Composites', Cement and Concrete Research, Vol.27, No.6, 1997, pp.925-936 https://doi.org/10.1016/S0008-8846(97)00061-6
- Li, V. C. and Stang, H., 'Interface Property Characterization and Strengthening Mechanisms in Fiber Reinforced Cement Based Composites', Advanced Cement Based Materials, No.6, 1997, pp.1-20
- Wu, H. C. and Li, V. C., 'Fiber Cement Interface Tailoring with Plasma Treatment', Cement and Concrete Composites, No.21, 1999, pp.205-212
- Li, V. C., Chan, Y. w., and Wu, H. C., 'Interface Strengthening Mechanisms in Polymeric Fiber Reinforced Cementitious Composites', Proceeding of International Symposium of Brittle Matrix Composites, Warsaw, September 13-15, 1994, IKE and Woodhead Publish., Warsaw, 1994, pp.7-16
- Sehaj Singha, Arun Shuklaa, and Richard Brown, 'Pullout Behavior of Polypropylene Fibers from Cementitious Matrix', Cement and Concrete Research. No.34, 2004, pp.1919-1925
- Choi, Y. W., Moon, D. J., Chung, J. S., and Chod, S. K, 'Effects of Waste PET Bottles Aggregate on the Properties of Concrete', Cement and Concrete Research, No.35, 2005, pp.776-781
- Chan, Y. Wand Chu, S. H., 'Effect of Silica Fume on Steel Fiber Bond Characteristics in Reactive Powder Concrete', Cement and Concrete Research. No.34, 2004, pp.1167-1172
- Banthia, N., Metal Fibre with Optimizes Geometry for Reinforcing Cement-Based Materials, United States Patent, Patent Number: 5,443,918, Aug. 22, 1995, pp.1-13
- Won, J. P., Lim, D. H., Park, C. G., and Park, H. G., 'Bond Behavior and Flexural Performance of Structural Synthetic Fibre Reinforced Concrete', Magazine of Concrete Research, Vol.28, No.6, 2006, pp.401-410
- Narkaki, M., Katsutoshi T., Satoshi, S., Masato, K, and Seiichi Goto, 'Analysis of Hydrophile Process of a Polymer Surface with an Inverter Plasma', Surface and Coating Technology, Vol.136, pp.265-268 https://doi.org/10.1016/S0257-8972(00)01028-8
- Ha, T. W. and Yang, H. S., 'Development of Polypropylene Fiber for Shotcrete, Journal of Korean Society for Rock Mechanics', Tunnel & Underground Space, Vol.14, No.4, 2004, pp.241-247
- Yoon, K. W., Park, O. O, and Lee, H. W., 'Poly (Ethylene Terephthalate)/MaleicAnhydride - Grafted PP/Poly (Styrene-Co- Maleic Anhydride)', Polymer, The Polymer Society of Korea, 2001, Vol.25, No.2, pp.226-232
- Moon, H. S., Anhydride Grafted Polypropylene on the Microstructures of Polypropylene/Nylon Blends, MS thesis, Department of Chemical Engineering, 1994, Korea Advanced Institute of Technology, Daejoen, Korea, pp.23-35
Cited by
- Bond Properties of Structural Poly Vinyl Alcohol Fiber in Cement Based Composites with Metakaolin and Silica Fume Contents vol.54, pp.5, 2012, https://doi.org/10.5389/KSAE.2012.54.5.009
- Effect of Mineral Admixture on Bond Properties between Polyolefin Based Synthetic Fiber and Cement Mortar vol.23, pp.3, 2011, https://doi.org/10.4334/JKCI.2011.23.3.339