Petrographic Study(ASTM C 295) on the KEDO Concrete Aggregates

콘크리트용 KEDO 골재의 암석기재시험 (ASTM C295)

  • Jeong, Ji-Gon (Dept. of Geology and Earth Environmental Science, Chungnam National University) ;
  • Kim, Kyung-Su (HLW Disposal Research Center, Korea Atomic Energy Research Institute) ;
  • Lee, Chol-Woo (Geothermal Resources Group, Korea Institute of Geoscience and Mineral Resources)
  • 정지곤 (충남대학교 지구환경과학부) ;
  • 김경수 (한국원자력연구원 고준위폐기물처분연구센터) ;
  • 이철우 (한국지질자원연구원 지열자원연구실)
  • Published : 2007.12.30

Abstract

For the preliminary judgement on the chemical stability of concrete aggregates mixed with cement paste, ASTM C 295 method can be applied prior to the long-term chemical test methods. By using this standard test method, the petrographic study on the appropriateness of natural KEDO aggregates for concrete was carried out. With the natural gravel and sand aggregates, the polarized microscope, stereoscopic microscope, and X-ray diffractometer were used for examination. The result shows the 23% of gravel aggregates and 5.1% of sand aggregates are chemically unstable. To select the favorable KEDO concrete aggregates, it is required to exclude the highly metamorphosed rocks, acidic volcanic rocks, highly foliated rocks, and expansive rocks identified from mortar-bar test. Further chemical test and mortar-bar test method integrated with this study is recommended for the suitability assessment of natural KEDO concrete aggregates.

본 연구는 한반도에너지개발기구(KEDO) 골재에 대하여 ASTM C 295를 적용, 암석기재학적 시험을 통하여 콘크리트를 위한 골재의 적합성을 타진하는데 목적이 있다. 시험에는 천연의 자갈골재와 모래골재를 재료로 하여 편광현미경, 실체현미경, XRD를 주로 사용하였다. KEDO의 천연골재 중 자갈골재의 23%, 모래골재의 5.1%가 화학적으로 불안정한 골재에 해당된다. 따라서 콘크리트용 KEDO 골재의 선정에 있어서 가능한 한 편마암과 같은 고변성 작용을 받은 변성암, 산성화산암, 엽리가 발달된 암석, 그리고 모르타르 봉 시험에서 불량한 골재로 확인된 암석은 피하여야 한다. 본 연구결과, 콘크리트용 KEDO 골재의 적합성 여부를 판단하기 위해서는 추가적인 화학적 시험과 모르타르 봉 시험을 거친 후 종합적으로 그 사용 여부를 결정함이 바람직하다.

Keywords

References

  1. 용태형, 최진만, 이양수, 윤재환, 1994, 제주도 콘크리트 구조물의 열화현상에 관한 조사 보고. 대한건축학회 학술발표논문집 14-1, p.509-512
  2. 유신애, 1997, 조암광물 골재를 사용한 몰탈바(ASTM C 227-90)의 팽창률 해석. 충남대학교 대학원 지질학과 석사학위 논문 '97
  3. 황형중, 1999, 충남대학교 석사학위논문. 미발간
  4. Deere, D. U., 1963, Technical description of rock cores for engineering purposes. Rock Mechs, Engineering Geology 1, p.18-22
  5. Hook, E. & Bray, J. W., 1974, Rock Slope engineering. Inst. of Mining and Metallurgy, London
  6. ISRM Working Party, 1975, Suggested methods for the description of rock masses, joints and discontinuities. Intl. Soc. of Rock Mechs., 2d Draft, August, Lisbon
  7. ASTM C 227-90, 1995, Annual books of ASTM standards. American Society for Testing and Materials, section4, vol. 04.02, p.129-133
  8. ASTM C 295-90, 1995, Annual books of ASTM standards. American Society for Testing and Materials, section4, vol. 04.12, p.176-183
  9. Hathaway, J. C., 1979, Reviews in mineralogy. Marine Mineralogy 6, p.139
  10. Keller, E. A., 1979, Environmental Geology. 2nd, p.55-63