Bulletin of the Korean Chemical Society

Korean Chemical Society (대한화학회)
권호 표지
DOI QR코드

DOI QR Code

Influence of Surface Treatment of Polyimide Film on Adhesion Enhancement between Polyimide and Metal Films

  • Park, Soo-Jin (Department of Chemistry, Inha University) ;
  • Lee, Eun-Jung (Department of Chemistry, Chungbuk National University) ;
  • Kwon, Soo-Han (Department of Chemistry, Chungbuk National University)
  • Published : 2007.02.20
Download PDF
⟨ Previous Next ⟩

Abstract

In this work, the effects of chemical treatment of polyimide films were studied by FT-IR, X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and contact angles. The adhesion characteristics of the films were also investigated in the peel strengths of polyimide/aluminum films. The increases of surface functional groups of KOH-treated polyimide films were greatly correlated with the polar component of surface free energy. The peel strength of polyimides to metal substrate was also greatly enhanced by increasing the KOH treatment time, which can be attributed to the formation of polar functional groups on the polyimide surfaces, resulting in enhancement of the work of adhesion between polymer film and metal plate.

Keywords

References

  1. Tew, G. N. J. Am. Chem. Soc. 2006, 128, 3104
  2. Khongtong, S.; Ferguson, G. S. J. Am. Chem. Soc. 2002, 124, 7254 https://doi.org/10.1021/ja017396e
  3. Liaw, D.-J.; Chang, F.-C.; Leung, M.; Chou, M.-Y.; Muellen, K. Macromolecules 2005, 38, 4024 https://doi.org/10.1021/ma048559x
  4. Park, S. J.; Kim, H. S.; Jin, F. L. J. Colloid Interface Sci. 2005, 288, 238 https://doi.org/10.1016/j.jcis.2005.02.061
  5. Kim, Y.-H.; Kim, H.-S.; Kwon, S.-K. Macromolecules 2005, 38, 7950 https://doi.org/10.1021/ma047433x
  6. Tummala, R. R.; Rymaszewski, E. J. Microelectronics Packaging Handbook; Van Nostrand Reinhold: New York, U. S. A., 1989; p 54
  7. Ling, Q.-D.; Chang, F.-C.; Song, Y.; Zhu, C.-X.; Liaw, D.-J.; Chan, D. S.-H.; Kang, E.-T.; Neoh, K.-G. J. Am. Chem. Soc. 2006, 128, 8732 https://doi.org/10.1021/ja062489n
  8. Zhang, F.; Jia, Z.; Srinivasan, M. P. Langmuir 2005, 21, 3389 https://doi.org/10.1021/la048741r
  9. Park, S. J.; Cho, K. S.; Kim, S. H. J. Colloid Interface Sci. 2004, 272, 384 https://doi.org/10.1016/j.jcis.2003.12.027
  10. Manzione, T. L. Plastic Packaging of Microelectronic Devices; Van Nostrand Reinhold: New York, U. S. A., 1990; p 87
  11. Murdey, R.; Stuckless, J. T. J. Am. Chem. Soc. 2003, 125, 3995 https://doi.org/10.1021/ja028829w
  12. Honma, M.; Hirata, K.; Nose, T. Appl. Phys. Lett. 2006, 88, 33513 https://doi.org/10.1063/1.2166688
  13. Butoi, C. I.; Steen, M. L.; Peers, J. R. D.; Fisher, E. R. J. Phys. Chem. B 2001, 105, 5957 https://doi.org/10.1021/jp010202x
  14. Helt, J. M.; Drain, C. M.; Bazzan, G. J. Am. Chem. Soc. 2006, 128, 9371 https://doi.org/10.1021/ja056809z
  15. Ramos, M. D. Vaccum 2002, 64, 255 https://doi.org/10.1016/S0042-207X(01)00332-3
  16. Acevado, M.; Harris, F. W. Polymer 1994, 35, 4456 https://doi.org/10.1016/0032-3861(94)90107-4
  17. Thanuja, J.; Srinivasan, M. J. Polym. Sci. Polym. Chem. 1988, 26, 1697 https://doi.org/10.1002/pola.1988.080260702
  18. Park, S. J.; Lee, H. Y. J. Colloid Interface Sci. 2005, 285, 267 https://doi.org/10.1016/j.jcis.2004.11.062
  19. Fowkes, F. M. J. Phys. Chem. 1963, 67, 2538 https://doi.org/10.1021/j100806a008
  20. Park, S. J. Interfacial Forces and Fields: Theory and Applications; Hsu, J. P., Ed.; Marcel Dekker: New York, U. S. A., 1999; p 394
  21. Murakami, T.; Kuroda, S.; Osawa, Z. J. Colloid Interface Sci. 1998, 202, 37 https://doi.org/10.1006/jcis.1997.5386
  22. Shirahata, N.; Hozumi, A. Chem. Mater. 2005, 17, 20 https://doi.org/10.1021/cm0490165

Cited by

  1. Surface Modification of the Polyimide Films by Electrical Discharges in Water vol.10, pp.9, 2013, https://doi.org/10.1002/ppap.201300015
  2. Carbonization of Pitch-coated Glass Fibers on Thermal Conductivity of Epoxy Composites vol.26, pp.5, 2013, https://doi.org/10.7234/composres.2013.26.5.315
  3. PDMS/Kapton Interface Plasma Treatment Effects on the Polymeric Package for a Wearable Thermoelectric Generator vol.5, pp.14, 2013, https://doi.org/10.1021/am401222p
  4. Gold layers on untreated and plasma-treated substrates of quaternized polysulfones vol.18, pp.10, 2014, https://doi.org/10.1007/s10008-014-2540-x
  5. Development of chip shrink technology for lateral-type GaN based HFETs using SiO2/polyimide dual IMD layers vol.11, pp.2, 2015, https://doi.org/10.1007/s13391-014-4298-9
  6. Polyimide Film Surface Modification by Nanosecond High Voltage Pulse Driven Electrical Discharges in Water vol.12, pp.8, 2015, https://doi.org/10.1002/ppap.201400170
  7. Preparation and characterization of inherently heat-sealable polyimides with high glass transition temperatures vol.133, pp.8, 2015, https://doi.org/10.1002/app.43058
  8. Influence of oxidative atmosphere of the electron beam irradiation on cyclization of PAN-based fibers vol.16, pp.3, 2015, https://doi.org/10.5714/CL.2015.16.3.219
  9. Morphological investigation of synthetic poly(amic acid)/cerium oxide nanostructures vol.55, pp.10, 2015, https://doi.org/10.1002/pen.24122
  10. Surface analysis of polymeric substrates used for inkjet printing technology vol.42, pp.1, 2016, https://doi.org/10.1108/CW-10-2015-0047
  11. Bonding Pad Over Active Structure for Chip Shrinkage of High-Power AlGaN/GaN HFETs vol.63, pp.2, 2016, https://doi.org/10.1109/TED.2015.2509964
  12. Investigation of nano-inks’ behaviour on flexible and rigid substrates under various conditions vol.43, pp.1, 2017, https://doi.org/10.1108/CW-10-2016-0049
  13. Dependence of electrical resistivity on sintering conditions of silver layers printed by InkJet printing technology vol.43, pp.2, 2017, https://doi.org/10.1108/CW-02-2017-0008
  14. An effective and novel pore sealing agent to enhance the corrosion resistance performance of Al coating in artificial ocean water vol.7, pp.1, 2017, https://doi.org/10.1038/srep41935
  15. Improvement of the evaluation of inkjet printed silver based layers’ adhesion pp.1568-5616, 2018, https://doi.org/10.1080/01694243.2018.1516502
  16. Interfacial aspects of adhesion in polymer nanocomposite thin-film devices vol.115, pp.2, 2010, https://doi.org/10.1002/app.31083
  17. Antibacterial behavior of transition-metals-decorated activated carbon fibers vol.325, pp.1, 2007, https://doi.org/10.1016/j.jcis.2008.05.016
  18. Statistical analysis on morphology development of some semialicyclic polyimides using atomic force microscopy vol.76, pp.5, 2007, https://doi.org/10.1002/jemt.22193
  19. Transferable and flexible thin film devices for engineering applications vol.24, pp.5, 2007, https://doi.org/10.1088/0960-1317/24/5/055019
  20. An overview of new oxidation methods for polyacrylonitrile-based carbon fibers vol.16, pp.1, 2007, https://doi.org/10.5714/cl.2015.16.1.011
  21. Inkjet-Printed Flexible Active Multilayered Structures vol.2, pp.18, 2007, https://doi.org/10.1557/adv.2017.237
  22. Polyimide Metallization Using Nickel Nano-Film as both Catalyst and Barrier Layer of Copper Electroless Deposition vol.166, pp.15, 2007, https://doi.org/10.1149/2.1111915jes
  23. Preparation and growth mechanism of solidified TiO2 film on polyimide by SILAR at room temperature vol.9, pp.3, 2007, https://doi.org/10.1063/1.5089185
  24. Fabrication of graphene/polyimide nanocomposite-based hair-like airflow sensor via direct inkjet printing and electrical breakdown vol.28, pp.6, 2007, https://doi.org/10.1088/1361-665x/ab18cb
  25. Functional Polyimide-Based Electrospun Fibers for Biomedical Application vol.12, pp.19, 2007, https://doi.org/10.3390/ma12193201
  26. Atomic Oxygen Adaptability of Flexible Kapton/Al2O3 Composite Thin Films Prepared by Ion Exchange Method vol.9, pp.10, 2007, https://doi.org/10.3390/coatings9100624
  27. Growth Behavior of SiO2 Films on Polyimide Substrates after Ion-Beam Treatment vol.75, pp.8, 2007, https://doi.org/10.3938/jkps.75.591
  28. Fabrication process of integrated inductors on flexible substrate for radio frequency and microwave applications vol.38, pp.2, 2020, https://doi.org/10.1116/1.5138202
  29. Stress Release Effect of Micro-hole Arrays for Flexible Electrodes and Thin Film Transistors vol.12, pp.16, 2020, https://doi.org/10.1021/acsami.0c02362
  30. Quantitative calibration of conductive pattern growth via electroless copper plating at nano-resolution vol.8, pp.3, 2007, https://doi.org/10.1088/2051-672x/aba342
  31. 3D Printing of Multilayered and Multimaterial Electronics: A Review vol.7, pp.10, 2007, https://doi.org/10.1002/aelm.202100445