센서학회지 (Journal of Sensor Science and Technology)

  • 제16권3호
  • /
  • Pages.174-178
  • /
  • 2007
  • /
  • 1225-5475(pISSN)
  • /
  • 2093-7563(eISSN)
한국센서학회 (The Korean Sensors Society)
권호 표지
DOI QR코드

DOI QR Code

힌지구조를 갖는 초소형 콘덴서 마이크로폰

A novel miniature condenser microphone with a hinge diaphragm

  • 김혜진 (한국전자통신연구원, IT 융합부품연구소) ;
  • 이성규 (한국전자통신연구원, IT 융합부품연구소) ;
  • 박강호 (한국전자통신연구원, IT 융합부품연구소)
  • Kim, Hye-Jin (IT convergence & Components Laboratory, ETRI) ;
  • Lee, Sung-Q (IT convergence & Components Laboratory, ETRI) ;
  • Park, Kang-Ho (IT convergence & Components Laboratory, ETRI)
  • 발행 : 2007.05.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents a novel, highly sensitive condenser microphone with a flexure hinge diaphragm. We used the finite-element analysis (FEA) to evaluate the mechanical and acoustic performance of the condenser microphone with a hinge diaphragm. And we fabricated the miniature condenser microphones with area of 1.5 mm${\times}$1.5 mm. From the simulation results, we confirmed that the maximum displacements at the center of flexure hinge diaphragms are several hundred times, compared with flat diaphragms. The sensitivities of fabricated miniature microphones are about $12.87{\mu}V/Pa$ at 1 kHz under a low bias voltage of 1 V, and the frequency response is flat upto 13 kHz.

키워드

참고문헌

  1. W. Kronast, B. Muller, W. Siedel, and A. Stoffel, 'Single-chip condenser microphone using porous silicon as sacrificial layer for the air gap,' Sensors and Actuators A., vol. 87, pp. 188-193, 2001 https://doi.org/10.1016/S0924-4247(00)00483-0
  2. M. Brauer, A. Dehe, T. Bever, S. Barzen, S. Schmitt, M. Fuldner, and R. Aigner, 'Silicon microphone based on surface and bulk micromaohining,' J. Micromech. Microeng., vol. 11, pp. 319-322, 2001 https://doi.org/10.1088/0960-1317/11/4/305
  3. Y. B. Ning, A. W. Mitchell, and R. N. Tait, 'Fabrication of a silicon micromachined capacitive microphone using a dry-etch process,' in Digest Tech. Papers Transducers'95 & EUROSENSORS IX, pp. 704-707, Stockholm, Sweden, 1995
  4. 권휴상, 이광철, '키판접합기술을 이용한 두꺼운 백 플레이트와수직음향구멍을갖는정전용량형 마이크 로폰의 설계와제작', 센서학회지,제16권,제1호,pp. 62-67. 2007 https://doi.org/10.5369/JSST.2007.16.1.062
  5. J. Chen, L. Liu, Z. Li, Z. Tan, Y. Xu, and J. Ma, 'On the single-chip condenser miniature microphone using DRIE and backside etching techniques,' Sensors and Actuators A., vol. 103, pp. 42-47,2003 https://doi.org/10.1016/S0924-4247(02)00326-6
  6. R. Kressmann, M. Klaiber, and G. Hess, 'Silicon condenser microphones with corrugated silicon oxide/nitride electret membranes,' Sensors and Actuators A., vol. 100, pp. 301-309, 2002 https://doi.org/10.1016/S0924-4247(02)00137-1