Journal of Fashion Business (패션비즈니스)

The Korean Society of Fashion Business (한국패션비즈니스학회)
권호 표지

A Study on the Automatic Pattern Development of Adult Male Basic Pattern Using 3D Body Scan Data

  • Jeong, Mi-E (Dept. of SNU Research Institute of Human Ecology) ;
  • Nam, Yun-Ja (Dept. of Clothing Textile, Seoul National University)
  • Published : 2007.07.30
Download PDF
⟨ Previous Next ⟩

Abstract

This study examined how to create 2D basic pattern of individuals by means of 3-D body figure, which is to develop a flat of individual basic pattern directly from the 3-D body scan data of each subject using that of the upper body of a male adult. In terms of methodology, this study adopted 3D body scan data on system and body to make examinations in the following steps: 1. Standard point and line were set on human body, along with 3-D definition points(feature points). 2. PB was created by modifying horizontal and longitudinal section of scan data. 3. Ways to set reserve were established in the findings of PB planar development. Respective developed flat patterns were compared with pattern findings in previous studies by means of sensory evaluation. As a result, it was found that both system and body model are basic pattern and belong to appropriate pattern as semi-tight-fit basic pattern with overall appropriate tolerances. Thus, this study came to a conclusion that it is feasible and valid to develop theories for flat development as considered herein.

Keywords

References

  1. Machiko, M.(2000), "Body Surface Organization I " ,Bunka Wom. Univ.Tokyo
  2. Imaoka,H.& Sibuya,A.(1989), ''The method of Automatic pattern development" SEN-I GAKKAISHI, Vol.45,No.10, 420-427 https://doi.org/10.2115/fiber.45.10_420
  3. Jeong,M.E.(2003), Study on the Proportional Drafting Method of an Upper Trunk Basic Pattern for Male Clothing System, Doctoral dissertation, Bunka Wom. Univ.Tokyo
  4. Jun Onuma.(2006), "Men's Wear I" ,Bunka College.Tokyo
  5. Korea Research Institute of Standards and Science. (1997), "Physical Standard Investigation", Seoul
  6. Sumiko, Y.(1976) "Body Surface and Body Shape" kouseikan.Tokyo
  7. Hu,D.J,Na,M.H,Lee,J.S,Kim,J.S,Jung,B.H. (2001) "Industrial pattern design" KYOHAK research. Seoul
  8. Suh,D.E(2001), "A Study of development men's jacket pattern based on 3-D scan data" ,Doctoral dissertation, Yonsei Univ, Seoul, 10
  9. Park,S.J(2002). "Establishment of Theory for Designing the tight-fitting Bodice Pattern using 3D Scanned Data of Human Body" . Doctoral dissertation, Bunka Wom. Univ. Tokyo
  10. http://www.dnmft.com/narcis01.htm
  11. Yoshiko, T., Atsuo, S. and Toshinari, N. (1995), "Evaluation Method of Clothing Fitness with BodY(Part 3)-Evaluation by Cross-sectional Shape of Clothing" , Vol.48, No.2 52-59
  12. Jeong,Y.& Hong,K.(2006). "Development of 2D Tight-fitting Pattern from 3D Scan Data" , Journal of the Korean Society Clothing and Textiles, VoI.30, No.1, 157-166
  13. Machiko,M.& Setsuko,N.(1990). "A study of Basic pattern Making of Women's Upper Trunk-Scrutinizing the Short-Measurement Drafting System-" ,The Journal of Society of Home Economics, Vol.41, No.12, 1213-1223
  14. Machiko,M. & Kayo,S. (1985). "A Study of Technical Errors in Drafts of a Body Surface " . Bull. Bunka Wom.univ. No. 16, 85-98
  15. Machiko,M.& Jeong,M,(2002). "A Study on the Method of Drafting a Basic pattern of Upper Trunk for Men's Clothing design(part 1) Tight Fit Basic Making of Upper Trunk with Average Equation" , Journal of Jpn. Res. Ass. Tex. End-Uses, Vol.43, No.9, 593-603
  16. Jeong,M.& Machiko,M.(2004). "A Study on the Method of Drafting a Basic pattern of Upper Trunk for Men's Clothing design(part 2)" Studies on How Change an Average Basic Pattern of a Shoulder Slope into the General Basic pattern. Journal of Jpn. Res .Ass. Tex. End-Uses, Vol.44, No.12, 780-787